03-07-2007
New to AIX and got my hands on a RS6000 v.need help getting it on the network
So im fairly new to AIX and my knowledge is very, very limited but i got my hands on an RS6000 43P model and im trying to get it on the network so i can access it from work. I have pretty much tried everything i can/know how to do by reading up as much as i can but im still lost.
I have the 43P connected to my router and i've tried configuring the 43P but i need some help. If some can walk me thru it that would be wonderful.
Im using DHCP for TCPIP Configuratin & Startup thru Smitty to configure 43P. If someone could clarify what i need to put in the brackets that would be great.
Use DHCP for TCPIP Configuration & Startup
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[TOP] [Entry Fields]
Network INTERFACE any
Use DHCP starting Now and System Restar> +
HOSTNAME []
Site Class Identifier []
Client Identifier []
IP Address Lease Time (seconds) [] #
Requested IP Address []
Server Identifier (ip address) []
Subnet Mask []
Time Offset [] #
Routers (ip addresses) []
10 More Discussions You Might Find Interesting
1. Programming
I am looking for the above
Can anyone point me to a reliable product, with available
support in the forseeable future ?
Seeker (0 Replies)
Discussion started by: Seeker
0 Replies
2. UNIX for Advanced & Expert Users
I am attempting to install PHP on an IBM RS6000 AIX UNIX box. I am not getting very far and hope someone can point me in the right direction. Here is the message from the output:
checking for Apache 1.x module support via DSO through APXS
Sorry I was not able to successfully run APXS.... (6 Replies)
Discussion started by: jyoung
6 Replies
3. UNIX for Advanced & Expert Users
Hello all!
This is my first post here!
I'm having a hard time with an IBM RS/6000 J40 machine.
I'm trying to install AIX 5.2L on it but, up to now, I can't make it boot from the CDROM.
Do any of you have an ideia?
Thank you for your time! (3 Replies)
Discussion started by: MCM
3 Replies
4. AIX
Hi all,
I am interested in your opinions of the best way to get hands-on security experience with AIX. I am proficient with most linux flavors on intel, but need to get familiar with AIX.
Any ideas on how to get some hands-on without lumping out $4Gs for a used RS/6000?
Thanks
EW (4 Replies)
Discussion started by: ewelsh
4 Replies
5. AIX
Hello there!
I have a RS-6000 7043-140 machine with AIX version 4.1.5, that is
working for almost 8 years now. It has a tty monitor. My problem
started when I upgraded my machine to install a gxt250 graphics adapter
card together with a 15" AOC VGA Monitor, logitech keyboard and mouse, ... (2 Replies)
Discussion started by: bright_genius
2 Replies
6. AIX
Hi There!!
I need to reinstall the operating system AIX 5.2 in a RS6000 7026/6H1 that has AIX 4.3 but I need a firmware upgrade that I dón´t know where can I obtain.
- Platform firmware version 3 or later.
Someone can help me please, I will be very grateful !!
Thank´s. (1 Reply)
Discussion started by: terron79
1 Replies
7. AIX
Hello everyone,
I have just joined your forum even though I have been using it on and off for couple of months now. Up until now I have been able to find any information I needed by just browsing this site or performing a Google search, but now I'm stuck!. I was hoping you could help me with... (16 Replies)
Discussion started by: juniorG
16 Replies
8. AIX
Greetings to all:
Gentlemen, I've tried extremely hard to hookup my notebook via the hyperterminal to my AIX box (IBM 7046-B50) by virtue of a cross-over cable. Don't know really whats going on ......to my surprise. The notebook says its hookedup successfully but shows no unix login prompt on... (6 Replies)
Discussion started by: mhatmi
6 Replies
9. AIX
Hey guys,
I'm a newbie in Unix world..
Currently in my office lies an old IBM RS6000 which hasn't been maintained for a very long time. The former admin has resigned and we don't have any documentation or whatsoever regarding the old machine. All I know that it is an RS6000 is because of what's... (4 Replies)
Discussion started by: arch4ng3l
4 Replies
10. AIX
I've an old server 1996 RS6000 (Processor 604e) running AIX 5.1.
It started up fine, booted up and connected on 10Mbit with my router. I used to be able to connect to it with telnet but not anymore. I know the IP is right but working with the smit tcpip options, looks like I've changed... (1 Reply)
Discussion started by: Devyn
1 Replies
LEARN ABOUT OSX
perlos400
PERLOS400(1) Perl Programmers Reference Guide PERLOS400(1)
NAME
perlos400 - Perl version 5 on OS/400
DESCRIPTION
This document describes various features of IBM's OS/400 operating system that will affect how Perl version 5 (hereafter just Perl) is
compiled and/or runs.
By far the easiest way to build Perl for OS/400 is to use the PASE (Portable Application Solutions Environment), for more information see
<http://www.iseries.ibm.com/developer/factory/pase/index.html> This environment allows one to use AIX APIs while programming, and it
provides a runtime that allows AIX binaries to execute directly on the PowerPC iSeries.
Compiling Perl for OS/400 PASE
The recommended way to build Perl for the OS/400 PASE is to build the Perl 5 source code (release 5.8.1 or later) under AIX.
The trick is to give a special parameter to the Configure shell script when running it on AIX:
sh Configure -DPASE ...
The default installation directory of Perl under PASE is /QOpenSys/perl. This can be modified if needed with Configure parameter
-Dprefix=/some/dir.
Starting from OS/400 V5R2 the IBM Visual Age compiler is supported on OS/400 PASE, so it is possible to build Perl natively on OS/400. The
easier way, however, is to compile in AIX, as just described.
If you don't want to install the compiled Perl in AIX into /QOpenSys (for packaging it before copying it to PASE), you can use a Configure
parameter: -Dinstallprefix=/tmp/QOpenSys/perl. This will cause the "make install" to install everything into that directory, while the
installed files still think they are (will be) in /QOpenSys/perl.
If building natively on PASE, please do the build under the /QOpenSys directory, since Perl is happier when built on a case sensitive
filesystem.
Installing Perl in OS/400 PASE
If you are compiling on AIX, simply do a "make install" on the AIX box. Once the install finishes, tar up the /QOpenSys/perl directory.
Transfer the tarball to the OS/400 using FTP with the following commands:
> binary
> site namefmt 1
> put perl.tar /QOpenSys
Once you have it on, simply bring up a PASE shell and extract the tarball.
If you are compiling in PASE, then "make install" is the only thing you will need to do.
The default path for perl binary is /QOpenSys/perl/bin/perl. You'll want to symlink /QOpenSys/usr/bin/perl to this file so you don't have
to modify your path.
Using Perl in OS/400 PASE
Perl in PASE may be used in the same manner as you would use Perl on AIX.
Scripts starting with #!/usr/bin/perl should work if you have /QOpenSys/usr/bin/perl symlinked to your perl binary. This will not work if
you've done a setuid/setgid or have environment variable PASE_EXEC_QOPENSYS="N". If you have V5R1, you'll need to get the latest PTFs to
have this feature. Scripts starting with #!/QOpenSys/perl/bin/perl should always work.
Known Problems
When compiling in PASE, there is no "oslevel" command. Therefore, you may want to create a script called "oslevel" that echoes the level
of AIX that your version of PASE runtime supports. If you're unsure, consult your documentation or use "4.3.3.0".
If you have test cases that fail, check for the existence of spool files. The test case may be trying to use a syscall that is not
implemented in PASE. To avoid the SIGILL, try setting the PASE_SYSCALL_NOSIGILL environment variable or have a handler for the SIGILL. If
you can compile programs for PASE, run the config script and edit config.sh when it gives you the option. If you want to remove fchdir(),
which isn't implement in V5R1, simply change the line that says:
d_fchdir='define'
to
d_fchdir='undef'
and then compile Perl. The places where fchdir() is used have alternatives for systems that do not have fchdir() available.
Perl on ILE
There exists a port of Perl to the ILE environment. This port, however, is based quite an old release of Perl, Perl 5.00502 (August 1998).
(As of July 2002 the latest release of Perl is 5.8.0, and even 5.6.1 has been out since April 2001.) If you need to run Perl on ILE,
though, you may need this older port: <http://www.cpan.org/ports/#os400> Note that any Perl release later than 5.00502 has not been ported
to ILE.
If you need to use Perl in the ILE environment, you may want to consider using Qp2RunPase() to call the PASE version of Perl.
AUTHORS
Jarkko Hietaniemi <jhi@iki.fi> Bryan Logan <bryanlog@us.ibm.com> David Larson <larson1@us.ibm.com>
perl v5.16.2 2012-10-11 PERLOS400(1)