I have a tape backup using ufsdump and I know the order of the dump.

The backup is of a sun v440 with solaris 9 and configured for a SAN

I want to create a test environment on a sun e420 with local disks. I have installed solaris 9 on the e420 and created the disk/slice layout the same as the v440. the e420 will not be connected to SAN.

Filesystem kbytes used avail capacity Mounted on
/dev/md/dsk/d0 8160366 6358828 1719935 79% /
/proc 0 0 0 0% /proc
mnttab 0 0 0 0% /etc/mnttab
fd 0 0 0 0% /dev/fd
/dev/md/dsk/d6 6192138 815529 5314688 14% /var
swap 14817784 96 14817688 1% /var/run
/dev/dsk/emcpower0a 20649993 11612265 8831229 57% /l
/dev/dsk/emcpower0e 20649993 13510511 6932983 67% /oa
/dev/md/dsk/d12 4127845 688996 3397571 17% /home
swap 14848472 30784 14817688 1% /tmp
/dev/md/dsk/d9 6192138 268382 5861835 5% /spare1
/dev/md/dsk/d24 8154588 2429 8070614 1% /spare4
/dev/md/dsk/d15 10323610 9 10220365 1% /spare5
/dev/md/dsk/d18 8258597 6102185 2073827 75% /spare2
/dev/md/dsk/d21 8257152 2455957 5718624 31% /testoa
/dev/dsk/emcpower2b 82595927 31018913 50751055 38% /onbackup
/dev/dsk/emcpower2a 20649993 7661554 12781940 38% /l/trng
/dev/dsk/emcpower1b 7220997 1947893 5200895 28% /l/bi
/dev/dsk/emcpower0d 20649993 11459971 8983523 57% /l/demo
/dev/dsk/emcpower1a 8253532 1255023 6915974 16% /l/ai
/dev/dsk/emcpower0f 20645897 12072108 8367331 60% /l/var
/dev/dsk/emcpower0b 20649993 8920722 11522772 44% /l/test
#

I am at the stage where I can start restoring. What do I restore that is not server specific. I want to transfer the applications and system settings but not the hardware drivers. After the restore I want the e420 to boot.

Hope you can help.

Kin regards,