10-14-2002
help installing Sun 8mm unipack scsi tape drive
Hi all, please help I am stuck.
I have installed a external unipack scsi tape drive. The tape drive is Exabyte Eliant 820. All I did was connected scsi cable and power it on. When issued "probe-scsi-all" command, the tape is correctly identified. However, when issued "dmesg | more" command, the tape is not found.
Whatever backup commands I issued such as mt, tar, or ufsdump, I would just get "/dev/rmt/0n no device or address" message.
Here are questions hoping you can help out:
1. do I need to do any configuration to prepare tape drive for use? such as mounting?
2. what other methods can I use to verify that the tape drive is recognized by O/S and ready to be used.
my system info:
Sun Ultra 5 running solaris 7
Thanks in advance for your help.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I'm running SCO OS 505 on a Compaq proliant 1600, and my tape drive will just not work. It was working properly and whent to Sh?ts when I tried to get the cd rom working. I have uninstalled any configured tape drive and rebooted and then configured a tape drive and rebooted still nothing. I'm... (4 Replies)
Discussion started by: kikkin
4 Replies
2. UNIX for Dummies Questions & Answers
hello,
I don't know what exactly the cause and the solution!!
suddenly I receive this error message when I want to use the 8mm tape drive
"I/O write error"
I disconnect the tape drive and I hook it in another WS and I receive this error :- ... (5 Replies)
Discussion started by: geoquest
5 Replies
3. Filesystems, Disks and Memory
I'm researching a tape drive + backup software to work across my unix/linux network. Was thinking about a dds4 tape drive (sony's) on my solaris ultra2, with some kind of software that would work across the network to back up my other 2 solaris boxes, plus my 2 linux boxes. What do others use... (3 Replies)
Discussion started by: kymberm
3 Replies
4. Solaris
hi-
I just installed a quad gigaswift ethernet scsi card to my sunblade 150. I checked with the docs, and got all of the required drivers on the box. Now, I'm trying to mount an external scsi tape drive with no luck. I set the scsi address on the external drive to 0. Here's what I'm coming... (9 Replies)
Discussion started by: ECBROWN
9 Replies
5. Solaris
Hi,
I am a newbie to Solaris, I have a SunFire V120 box, i was trying to install a tape drive(HP SureStore DAT24), i did the install in this manner.
# rm -rf /etc/path_to_inst
# init 6
later at the "ok" prompt i gave "boot -ar" after doing that it asked me various options i accepted the... (2 Replies)
Discussion started by: rajendra.rait
2 Replies
6. Linux
Hello. I have Redhat 8.0 on a laptop. Working good.
I wanted to install the tape drive that is physically attached to it. The tape drive worked fine under Windows98SE. It's one of those parallel QIC-80 drives and I confirmed that it is supported by FTape. It appears that FTape might already... (0 Replies)
Discussion started by: RuralTurtle
0 Replies
7. SCO
Hello,
I'm having some issues with installing SCSI tape drive on SCO 5.0.6
hardware config shows the following adapters
%adapter 0xE800-0xE8FF 10 - type=alad ha=0 bus=0 id=7 fts=sto
%adapter 0x0170-0x0177 15 - type=IDE ctlr=secondary dvr=wd
%adapter - 3 - ... (3 Replies)
Discussion started by: ananth_ak
3 Replies
8. UNIX for Dummies Questions & Answers
Currenty running SCO Openserver 6 at a Dell PowerEdge T300. I recently installed a driver for an Adaptec SCSI card (adpu320). When I connect a tape drive to it and re-start the system,it freezes and displays the following message: "WARNING: adpu320: Command timed out (ha= 4)" and the system... (2 Replies)
Discussion started by: RicardoM
2 Replies
9. Hardware
I've had a scsi hard drive, scsi tape drive, and cd rom working off an adaptec 29160 controller. Everything worked great until a few days ago. I begin getting tar format errors (running sco 5.0.6) on the tape drive and occasionally the entire system would hang up while trying to access data on... (0 Replies)
Discussion started by: powwm
0 Replies
10. Solaris
Hi all,
this time I'd need a help from an advanced Solaris system admin :rolleyes:
I attached a HP StorageWorks Ultrium 215 Tape Drives - Overview - c00059530 - HP Business Support Center to my Sun E220R and it got recognized immediately (probe-scsi-all).
Now the operating system boot process... (8 Replies)
Discussion started by: pseudocoder
8 Replies
mt(1) General Commands Manual mt(1)
Name
mt - magnetic tape manipulating program
Syntax
mt [-f tapename] command [count]
Description
The command permits the operation of a magnetic tape drive.
Options
The -f flag option uses the specified tape device (next argument) in place of either that tape device defined by your TAPE environment
variable (.login or .profile) or /dev/nrmt0h.
Some operations may be performed multiple times by specifying count. By default, performs the requested operation once.
The command argument defines the operation to be performed. Only as many characters as are required to uniquely identify a command need be
specified.
The following is a list of commands:
bsf Backspace count files.
bsr Backspace count records.
cache Allows to use the cache buffer on a tape drive that has the cache buffer feature.
clhrdsf Clear hardware/software problem. Works with tape drives which use the TMSCP tape controller interface This command is
restricted to root access only.
clserex Clear serious exception. Works with tape drives which use the TMSCP tape controller interface
clsub Clear subsystem. Works with tape drives which use the TMSCP tape controller interface This command is restricted to
root access only.
eof, weof Write count end-of-file marks at the current position on the tape.
eotdis Disable end-of-tape detection. When the end of tape is reached, the tape will run off the reel. Only the superuser
can issue this command. The command remains in effect for the device until end-of-tape detection is enabled with the
eoten command.
eoten Enable end-of-tape detection. When the end-of-tape markers are reached, the tape is halted on the reel, between the
two end-of-tape markers. Only the superuser can issue this command. The command remains in effect for the device
until end-of-tape detection is disabled with the eotdis command. This is the default mode after a system boot.
fsf Forward-space count files.
fsr Forward-space count records.
nocache Disables the use of the cache buffer for any tape drive that has the cache buffer feature.
offline, rewoffl Rewind the tape and place the tape unit off-line.
retension Retensions the tape. Retension means moving the tape one complete pass between EOT and BOT.
rewind Rewind the tape.
status Print status information about the tape unit.
Examples
This example shows how to rewind the tape
mt -f /dev/rmt0l rewind
This example shows how to backspace the tape nmt1h three files:
mt -f /dev/nrmt1h bsf 3
This example shows how to write two end-of-file marks at the current position on tape nmt6h:
mt -f /dev/nrmt6h eof 2
Return Values
In shell scripts, returns a 0 exit status when the operation(s) were successful, 1 if the command was unrecognized, and 2 if an operation
failed.
Files
/dev/rmt?h or /dev/rmt?l
Raw magnetic tape interface with rewind when closed
/dev/nmt?h or /dev/nmt?l
Raw magnetic tape interface with no rewind when closed
See Also
dd(1), tar(1), ioctl(2), mtio(4), tms(4), environ(7)
mt(1)