Tape Drive on Unix 7.1.1 Post: 27678

8 More Discussions You Might Find Interesting

1. Cybersecurity

Unix backup to tape drive

does anyone know how I can make an automatic backup of files to a tape drive under UNIX. I have so many commands, I don't know which goes where. I have commands for the task scheduler, Cron and other unix commands. Please help. Very Urgent. Thanks

2. UNIX for Advanced & Expert Users

linux/unix tape drive & AMANDA

Trying to set up AMANDA on my linux machine, with the DDS-3 HP Tape drive. Am having problems, in my amanda.conf it doesn't like /dev/st0 or /dev/st0nr and I need to have it as non rewinding, is there another command/params i can give it for the tape drive to be non rewinding? I'm trying to use...

3. Filesystems, Disks and Memory

DDS2 Tape Drive onto Linux/Unix

Knoppix, latest distribution is what I am using. I have a DDS2 tape drive. Recognised in Windows, etc. Cannot see it in UX/Lux. How do I mount it? How do I copy the data from the tape to another partition? What I need to do is transfer the contents of the DDS2 tape onto DVD. Simple. ...

4. AIX

Tape Drive

I have tape drive in one Lpar. when i saw that time tape is in defined state. After that i deleted the tape drive using the rmdev -R command. Then fired the cfgmgr -v command. But I am not getting the tape drive. Now the drive is even not in defined state also. It is not shown the tape drive. How...

5. UNIX for Dummies Questions & Answers

installing unix tape drive

Hi, i installed a unix tape drive on my alphaserver. when i use a mt command it tells me there is no tape or device. I have used the hardware manager and it shows the tape is present. Can anyone help me understand why it cannot pick up the tape as a default?

6. HP-UX

HP-Unix 64 bit Tape Drive creating problem

Hello All, I have HP Openview storage data protector version 5.5. When I am going to write my backup I have an error message saying "Connot Open Device /dev/rmt/0mn" Follownig is my output: # ls -l /dev/rmt/0mn crw-rw-rw- 2 bin bin 205 0x080140 Jan 17 16:41 /dev/rmt/0mn # uname -a...

7. Solaris

Help with tape drive

Hey folks, Linux admin here, forced to use Opensolaris to try to use ufsdump/ufsrestore to get some data of some old tapes. I've got Opensolaris 2009.06 on x86 and a Sony SDX-700V. As a "control" experiment, I booted the system with a Linux live CD and the tape drive worked perfectly. ...

8. HP-UX

TAPE drive

I have used ioscan -fnC tape and the system identified the tape drive. what is the command to show a listing of what is on the tape? I have used ls /dev/rmt/rmt0 to no avail. can anyone help? Thanks in advance

LEARN ABOUT CENTOS

tapeinfo

TAPEINFO(1)						      General Commands Manual						       TAPEINFO(1)

NAME

       tapeinfo - report SCSI tape device info

SYNOPSIS

       tapeinfo -f <scsi-generic-device>

DESCRIPTION

       The  tapeinfo  command  reads  various information from SCSI tape drives that is not generally available via most vendors' tape drivers. It
       issues raw commands directly to the tape drive, using either the  operating  system's  SCSI  generic  device  (	e.g.  /dev/sg0	on  Linux,
       /dev/pass0 on FreeBSD) or the raw SCSI I/O ioctl on a tape device on some operating systems.

       One  good  time	to  use 'tapeinfo' is immediately after a tape i/o operation has failed. On tape drives that support HP's 'tapealert' API,
       'tapeinfo' will report a more exact description of what went wrong.

       Do be aware that 'tapeinfo' is not a substitute for your operating system's own 'mt' or similar tape driver control program. It is intended
       to supplement, not replace, programs like 'mt' that access your operating system's tape driver in order to report or set information.

OPTIONS

       The first argument, given following -f , is the SCSI generic device corresponding to your tape drive.  Consult your operating system's doc-
       umentation for more information (for example, under Linux these are generally start at /dev/sg0 under FreeBSD these start at /dev/pass0).

       Under FreeBSD, 'camcontrol devlist' will tell you what SCSI devices you have, along with which 'pass' device controls  them.  Under  Linux,
       "cat /proc/scsi/scsi" will tell you what SCSI devices you have.

BUGS AND LIMITATIONS

       This program has only been tested on Linux with a limited number of tape drives (HP DDS4, Seagate AIT).

AVAILABILITY

       tapeinfo  is  currently	being maintained by Robert Nelson <robertnelson@users.sourceforge.net> as part of the 'mtx' suite of programs. The
       'mtx' home page is http://mtx.sourceforge.net  and  the	actual	code  is  currently  available	there  and  via  SVN  from  http://source-
       forge.net/projects/mtx.

SEE ALSO

       mt(1),mtx(1),scsitape(1),scsieject(1),loaderinfo(1)

								    TAPEINFO1.0 						       TAPEINFO(1)