NIC The Status Down but I can ping the localhost??!! Post: 27480

10 More Discussions You Might Find Interesting

1. Solaris

PING - Unknown host 127.0.0.1, Unknown host localhost - Solaris 10

Hello, I have a problem - I created a chrooted jail for one user. When I'm logged in as root, everything work fine, but when I'm logged in as a chrooted user - I have many problems: 1. When I execute the command ping, I get weird results: bash-3.00$ usr/sbin/ping localhost ...

2. Shell Programming and Scripting

NIC status bash shell

Hi can someone tell me what command i can use to find the NIC status im using the bash shell. I'v tried ifconfig -a but this comes back as command not found.

3. Shell Programming and Scripting

Status of NIC

Can anybody tell me the command to find out the current status of Network Interface Card?

4. Solaris

x86 Solaris 10 nic driver added but not attached. NIC is not detected.

I couldn't install my nic in solaris 10. I compiled and added the driver but failed to attach the driver and ifconfig output shows only loopback dev. Please see the following output and tell me whether my nic has been detected and why the driver failed to attach? My nic is detected in linux...

5. Red Hat

I want to tune NIC's rps, rfs and xps value. which NIC device should I modify.

Dear All I want tune my NIC's rps, rfs and xps value. In my system I have two NIC (eth0, eth1) and I have a bond0 ( eth0, eth1). Here is the question? Which device should I modify ? eth0 and eth1? or just modify bond0 or modify all device (eth0, eth1, bond0) Any advice is welcome....

6. AIX

Unable to ping localhost

Hi all, I have gone through many posts related to this issue,but my issue wasn't resolved hence creating new thread. I am unable to ping localhost. ping localhost tries to ping localhost which is defined in DNS. My /etc/hosts has entry for localhost as 127.0.0.1 loopback localhost. ...

7. Solaris

Network issue on multinic. Unable to ping a host from One NIC but other works

Dear, I hope you all will be ok. I have an issue with Solaris box running on x86 Blade. I am unable to ping a node neither traceroute. I am able to do traceroute from oce0:6 port which have IP and subnet of same type which oce0:1 has. details are as follows: Problem: root@rinams02:/#...

8. Solaris

Nic Failed Status

Hi guys, Another problem here and I appreciate the help, the interface in the solaris v440 is showing as "FAILED" ce0: flags=19040803<UP,BROADCAST,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,FAILED> mtu 1500 index 2 inet 192.168.1.30 netmask ffffff00 broadcast 192.168.1.255 ...

9. Shell Programming and Scripting

Network script for ping status

Actually I am using Red hat Linux 4.4 version. I want to check the 16 client pc status of connection from server.Whether the connection is available or not.I tried to develop the shell script for this code.But It don't work properly.I am a self study learner.Please give me a shell script for this...

10. Linux

Add two different subnet public IPs to single NIC or two different NIC on same box

Hello Admins, My ask is how can I add two different subnet IPs to same box with two different gateways? The issue is I can connect to the box when I am on ethernet LAN, but I am not able to connect to the same IP when I am on wifi. The server is RHEL 7 VM on vmware. How can I get connected...

LEARN ABOUT NETBSD

de

DE(4)							   BSD Kernel Interfaces Manual 						     DE(4)

NAME

     de -- DECchip 21040, 21140, 21141, 21142, and 21143 PCI Ethernet interface driver

SYNOPSIS

     de* at pci? dev ? function ?

     Configuration of PHYs may also be necessary.  See mii(4).

DESCRIPTION

     The de driver supports Ethernet and Fast Ethernet interfaces based on the Digital Equipment Corporation DECchip 21040, 21140, 21141, 21142,
     and 21143 model controllers for PCI bus.

     21040   10BASE-T and AUI/BNC
     21140   10BASE-T and 100BASE-TX
     21141   10BASE-T and 100BASE-TX
     21142   10BASE-T and 100BASE-TX
     21143   10BASE-T and 100BASE-TX

     Supported Network Interface Cards (NIC) include, but are not limited to:

     Accton EN1207i
     Cogent EM100
     Asante AsanteFAST
     DEC DE435
     DEC DE450
     DEC DE500
     SMC 9332
     Znyx NetBlaster ZX340 series (345, 348, 346)

     Generally, if the NIC is for PCI bus, and the major controller chip has the DIGITAL logo on it, with one of the model numbers above, the de
     driver should recognize and control it.  Beware, however, that many NIC manufacturers change the Ethernet controller chip without changing
     the product model number, and a physical inspection of the NIC, or a probe of the NIC with a PCI diagnostic tool is the only way to tell if a
     real DEC TULIP controller is present.

     Multi-port interfaces are typically configured as a PCI-PCI bridge with multiple de instances on the PCI bus on the other side of the bridge.

     DEC sold its semiconductor division to Intel.  In addition, there are many "knock-offs" of the DEC TULIP Ethernet controller chips; NICs
     based on these chips are handled by the tlp(4) driver.

     This de driver should not be confused with the NetBSD VAX de driver for the DEC DEUNA/DELUA Ethernet controller for UniBus.

SEE ALSO

     ifmedia(4), intro(4), mii(4), pci(4), tlp(4), ifconfig(8)

     http://www.adaptec.com/, http://www.asante.com/, http://www.smc.com/, http://www.znyx.com/

HISTORY

     The de driver first appeared in NetBSD 1.1

AUTHORS

     Matt Thomas <matt@3am-software.com>.

BSD
								 February 11, 2000							       BSD