New Drive problems Post: 27316

9 More Discussions You Might Find Interesting

1. Linux

HP DAT Drive C1533A on RH9 Problems

HELP!! I am having some major problems at present with a HP dat drive under RH9. The drive worked fine previously under RH8, but now does not work. I am using kernel 2.4.20-30.9 on a i686 athlon intel box. My messages log shows the below: Apr 23 11:39:24 devsys kernel: ahc_pci:1:6:0:...

2. SuSE

SUSE 9 - problems accessing CD ROM drive

I've got SUSE 9 installed on a removable hard drive and the system is up and running fine. I'm trying to copy stuff off a CD onto one of my Linux partitions but I am getting an errors : * Could not read /media/cdrom/file1.tar.tar I can browse to the file location on the CD by using the...

3. UNIX for Advanced & Expert Users

tar problems using Sony AIT drive

Recently we brought up a Spectralogic 2K Tape Library that had been out of service for about 3 years to replace a DDS-4 tape drive unit as our main backup device. Everything seemed to go fine but now I have run into a little problem. System details: FBSD 6.1 SpectraLogic 2K library with a...

4. Solaris

Tape drive problems

Recently we had a problem with a CPU card on our SunFire V880 which has Solaris 9 OS. we removed the card and there was also a problem with our usr which was accidentally deleted. We able to restore the usr but now we having a problem with our tape drive. Previously we could write to the with ...

5. Solaris

Solaris 10: Problems booting off mirror drive -- Error 22: No such partition

Solaris 10 5/08 on Ultra 40 M2 It boots fine off primary disk but having issues booting off the mirror disk. I get this error when booting off mirror disk: Booting 'Solaris 10 ... Mirror disk' root (hd1,0,a) Error 22: No such partition Press any key to continue... Any...

6. UNIX for Dummies Questions & Answers

Problems with SCSI card and tape drive

Currenty running SCO Openserver 6 at a Dell PowerEdge T300. I recently installed a driver for an Adaptec SCSI card (adpu320). When I connect a tape drive to it and re-start the system,it freezes and displays the following message: "WARNING: adpu320: Command timed out (ha= 4)" and the system...

7. SCO

Problems Detecting HP Tape Drive

I am trying to install an HP StorageWorks DAT40 Tape drive at SC0 5.0.7. The tape drive is not functional. When I run #sconf -v this is what I get; Sdsk ad160 0 0 0 0 Sdsk ad160 0 0 1 0 Stp ad160 0 0 3 0 But when...

8. HP-UX

LV and/or physical drive problems HP9000

I'm a technician who has been called upon to troubleshoot an ancient HP9000 K260, running HP UX 11.11. After a power sag/crash/restart FSCK gave multiple error/warning messages about logical volumes and groups. I have some modest experience with Unix servers, but not on such an old and...

9. UNIX for Advanced & Expert Users

Speed problems with tar'ing a 500Gb directory on an eSATA drive

I'm trying to compress a directory structure on an external hard drive, connected by eSATA cable to my linux (Ubuntu 10.04) desktop. The total volume is 500Gb with half a million files, ranging from Kb to Mb in size. The drive is 2Tb, with 0.8Tb free space before compression. running "tar -pcf...

LEARN ABOUT REDHAT

fmvj18x_cs

FMVJ18x_CS(4)						     Kernel Interfaces Manual						     FMVJ18x_CS(4)

y.

NAME

       fmvj18x_cs - Fujitsu FMV-J18x series device driver

SYNOPSIS

       insmod fmvj18x_cs.o [pc_debug=n] [fmvj18x_debug=n] [irq_list=i,j,...]

DESCRIPTION

       fmvj18x_cs  is the low-level Card Services driver for the Fujitsu FMV-J18x series PCMCIA ethernet adapter.  When this driver is attached to
       a card, it allocates the next available ethernet device (eth0..eth#).  This device name will be reported in the kernel log file, and passed
       on to cardmgr(8).

PARAMETERS

       pc_debug=n
	      Selects  the PCMCIA debugging level.  This parameter is only available if the module is compiled with debugging enabled.	A non-zero
	      value enables debugging.

       fmvj18x_debug=n
	      Selects the network debugging level.  The current default is 3; values of up to six increase reporting verbosity.

       irq_list=i,j,...
	      Specifies the set of interrupts that may be allocated by this driver.

AUTHOR

       Shingo Fujimoto - Fujitsu Laboratories Ltd.  <Shingo@flab.fujitsu.co.jp>

THANKS

       Yutaka TAMIYA - Fujitsu Laboratories Ltd.

       Hideaki Yoda - Fujitsu Limited.

SEE ALSO

       cardmgr(8), pcmcia(5).

								1999/02/08 08:02:01						     FMVJ18x_CS(4)