06-28-2002
Sun Booting problem
I was trying to test run a /bin/bash script i had just written when my monitor suddenly went blank.I had to shut down the machine from the systems main power. I was unable to boot afterwards and soo i went for the interactive boot process by typing boot -a.
I succeded in the first stage of the Interactive boot procedure; "Enter filename..etc" but when i got to the second stage; "Name of default directory for modules.....", i got the error message below;
boot: cannot find misc/krtld
boot: error loading interpreter (misc/krtld)
I use a Sun Enterprise 220R system that runs solaris 2.6. My uname -m is sun4u, it's a sun ultra system ( boot PROM 3).
nb: when i go to ok prompt and i type "printenv boot-file", it prints ; boot-file =
Nothing more.
Please i need to know what is causing this error message and how i can rectify it.
Please i need a really urgent response.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I have a Sun box that I am trying to get started up, but everytime it will crap out because it is bound to an NIS domain that no longer exists. The Master for that domain was put out of commission. It was suggested to me that I could boot off of the Installation cd for the OS (Solaris 8) and... (4 Replies)
Discussion started by: Jody
4 Replies
2. Solaris
Hi,
I have a Sun 3500 server on which i installed solaris 8 and have also installed veritas 4.0 on it. i dont know why from the time i have built this server whenever i try to boot it, the server doesnot come back smooth.... i have got to connect a laptop to the serial port of the server and... (3 Replies)
Discussion started by: ishila
3 Replies
3. Solaris
Hello
I have Sun Ultra 10 with Solaris 7 installed on it.
Sometimes back
after that the machine use to get hang .Even after
rebooting the system was not booting.
I have manually switch on /off many times from the
power board itself .Once in a while it
use to boot .After... (12 Replies)
Discussion started by: turki_00
12 Replies
4. Solaris
Hi,
I have a sun ultra enterprise 450 server. This server powers on and a white screen appears with the system and network information.
But it doesnot boot up completely. Booting operation wil be halted by a warning:
\usr\sbin\fsck not found. Most likely the mount of \usr failed or the... (5 Replies)
Discussion started by: tgashwini
5 Replies
5. Solaris
Dear All,
I am facing a specfic problem with my New SunFire T2000.Recently we bought new sunfire T2000 sparc server.When i am trying to install solaris 10 through cdrom , I get error messgae
Error:Last Trap: Instaruction Access Exception
{0} ok boot cdrom
Boot device:... (6 Replies)
Discussion started by: solaris8in
6 Replies
6. Solaris
Got the console cable all connected up and got tot he ok prompt.
Typed in boot cdrom and got the following:
ok boot cdrom
Boot device: /pci@8,700000/scsi@6/disk@6,0:f File and args:
ERROR: /packages/deblocker: Last Trap: Corrected ECC Error
Can't read disk label.
Can't open disk... (4 Replies)
Discussion started by: bbbngowc
4 Replies
7. Solaris
Hi all,
I am getting boot time message for sun E420R server. I need urgent help.
Hardware Power ON
CPU Offline (not present)
Master CPU : 0000.0001.0055.11a0
CPU Offline (not present)
CPU Offline (not present)
Master E$ : 0000.0000.0040.0000
Button Power ON (0 Replies)
Discussion started by: PUSHPARAJA
0 Replies
8. Solaris
Sun Fire V210, No Keyboard
Copyright 1998-2003 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.13.2, 4096 MB memory installed, Serial #61203679.
Ethernet address 0:3:ba:a5:e4:df, Host ID: 83a5e4df.
Boot device: net File and args:
100 Mbps FDX Link up
Timeout waiting for... (5 Replies)
Discussion started by: Mrudhul
5 Replies
9. Solaris
Booting problem on Sun 3500
Hi,
I have a Sun 3500 server on which i installed solaris 5.2 installed . i dont know why from the time i have built this server whenever i try to boot it, the server doesnot come back smooth.i got a message Sync file system than restart
some times showing ok... (2 Replies)
Discussion started by: najeer
2 Replies
10. Solaris
Hello
I have an old sun fire v250 server that I am trying to revive.
I am trying to boot it from cdrom to install the OS (Solaris 10). The original data in the disk is corrupt and I am trying to do a new clean install. However I encounter the following errors.
Does it look like the disk itself... (1 Reply)
Discussion started by: br1an
1 Replies
LEARN ABOUT CENTOS
fence_virsh
FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8)
NAME
fence_virsh - Fence agent for virsh
DESCRIPTION
fence_virsh is an I/O Fencing agent which can be used with the virtual machines managed by libvirt. It logs via ssh to a dom0 and there run
virsh command, which does all work.
By default, virsh needs root account to do properly work. So you must allow ssh login in your sshd_config.
fence_virsh accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent.
fence_virsh can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.
Vendor URL: http://libvirt.org
PARAMETERS
-a, --ip=[ip]
IP Address or Hostname This parameter is always required.
-l, --username=[name]
Login Name This parameter is always required.
-p, --password=[password]
Login password or passphrase
-c, --command-prompt=[prompt]
Force Python regex for command prompt (Default Value: ['[EXPECT]# '])
-x, --ssh
SSH connection (Default Value: 1)
-n, --plug=[id]
Physical plug number, name of virtual machine or UUID This parameter is always required.
-u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value: 22)
-4, --inet4-only
Forces agent to use IPv4 addresses only
-6, --inet6-only
Forces agent to use IPv6 addresses only
-S, --password-script=[script]
Script to retrieve password
-k, --identity-file=[filename]
Identity file for ssh
--ssh-options=[options]
SSH options to use (Default Value: -t '/bin/bash -c "PS1=# /bin/bash --noprofile --norc"')
-o, --action=[action]
Fencing Action (Default Value: reboot)
-v, --verbose
Verbose mode
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
-C, --separator=[char]
Separator for CSV created by operation list (Default Value: ,)
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 0)
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
--use-sudo
Use sudo (without password) when calling 3rd party sotfware.
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
STDIN PARAMETERS
ipaddr IP Address or Hostname This parameter is always required.
login Login Name This parameter is always required.
passwd Login password or passphrase
cmd_prompt
Force Python regex for command prompt (Default Value: ['[EXPECT]# '])
secure SSH connection (Default Value: 1)
port Physical plug number, name of virtual machine or UUID This parameter is always required.
ipport TCP/UDP port to use for connection with device (Default Value: 22)
inet4_only
Forces agent to use IPv4 addresses only
inet6_only
Forces agent to use IPv6 addresses only
passwd_script
Script to retrieve password
identity_file
Identity file for ssh
ssh_options
SSH options to use (Default Value: -t '/bin/bash -c "PS1=# /bin/bash --noprofile --norc"')
action Fencing Action (Default Value: reboot)
verbose
Verbose mode
debug Write debug information to given file
version
Display version information and exit
help Display help and exit
separator
Separator for CSV created by operation list (Default Value: ,)
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
delay Wait X seconds before fencing is started (Default Value: 0)
retry_on
Count of attempts to retry power on (Default Value: 1)
sudo Use sudo (without password) when calling 3rd party sotfware.
fence_virsh (Fence Agent) 2009-10-20 FENCE_AGENT(8)