06-01-2002
Thank you for your prompt reply. Let me please tell you a little bit more about my inquire. When I say I am newy to Unix I really mean it. I operate computers do not program them.
This system has a special application that runs on SCO Unix and that controls the addreesable scramblers and settops of a CATV operator. I can configure and modify the application but do not know anything about Unix.
About a year ago, the tape backup drive crashed. It was never replaced. Now, the hard disk failed and it was necessary to change it. This is why I need to load the OS again. To do so I require the tape backup drive. I have one available that is the HP 5000+. The computer as said before is an IBM PS/2 Model 90. I reference the system and the computer recognizes the tape, this means it appears as an available device in the set up (configuration) screen. I boot the system with the boot diskette and start with the OS loading process. Then I get a notice saying that the tape drive is not found. I understand that Unix does not recognize devices automatically. I believe that I need to make changes so that it is redirect to the new device ID. But I do not know if this is true or if I am doing something wrong. If I need to make changes: What are exactly those new instructions I have to add?
You say that that the hardware recog the device I need the drivers for Unix. Ok, I can get the drivers from the HP web but How do I load them??
Any help you can provide is welcome.
Regards,
Allaite
10 More Discussions You Might Find Interesting
1. Cybersecurity
does anyone know how I can make an automatic backup of files to a tape drive under UNIX. I have so many commands, I don't know which goes where. I have commands for the task scheduler, Cron and other unix commands. Please help. Very Urgent. Thanks (3 Replies)
Discussion started by: Cute
3 Replies
2. Solaris
I am currently using tar to backup a server that has 9gb of data.
This is fine and works fine, as part of this I send the backup to a remote tape on a remote server using rsh..
This is not very secure though is it?
Whats the best idea here - is there another way I should do this to be more... (1 Reply)
Discussion started by: frustrated1
1 Replies
3. Linux
All,
Has anybody ever got a Linux server to backup to a remote Solaris tape drive using the dump command and rsh? I can remtoely backup two Solaris server this way. Any help would be appreciated.
Thanks,
Mike (0 Replies)
Discussion started by: bubba112557
0 Replies
4. AIX
Currently I have a Dell Ultrium LTO 2 Tape Drive. I am going to have a IBM AIX server. Just wonder if it is possibe to connect this tape drive to the aix server? I have Brightstor Arcserver installed on another win 2003 server. Is it possible to install the arcserve agent on the aix and use the... (1 Reply)
Discussion started by: ming413
1 Replies
5. HP-UX
Need assistance:
Have HP Visualize C3600 workstation, HP-UX 10.20, and HP C6364A 12GB DDS-3 SCSI DAT drive. I am not a UNIX programmer and did not configure/build workstation.
Ran ioscan and shows up as HPC1537A, class tape, and 10/0/15/0.2.0. Switch on back of unit is denoted SCSI ID and is... (5 Replies)
Discussion started by: davel1000
5 Replies
6. UNIX for Dummies Questions & Answers
Hi All,
I have an old Unix system used by a client as a backup server.I installed an Exabyte tape drive and on restarting the server and during POSTs, the system recognizes the tape drive with its scsi id. On running the command devstat -IAF, the system sees the tape drive quite well.
When... (1 Reply)
Discussion started by: ezleone
1 Replies
7. Solaris
Hi,
I want to take backup of files older than 20 days from a directory onto a tape drive on remote machine on Solaris.
The files are of format abc-20100301000000.gz on my local machine.
I know the below commands for searching files older than x days and command for backup procedure.
solar1 #... (7 Replies)
Discussion started by: jyothi_wipro
7 Replies
8. Solaris
Hello all,
I'm trying to backup some files on a solaris 10 machine to the remote tape drive connected to another solaris 10 machine.
I have set up rsh to allow for password-less connection between the servers, but I'm not able to write to the tape with the command:
root@sdp4a>tar cvf... (1 Reply)
Discussion started by: kerrygold
1 Replies
9. Solaris
hi friends, i am trying to patch a solaris 9 server. However i need to do a ufsdump backup before any patching. There is no hardware port for connecting the tape drive. Any other ways to do a ufsdump ? :wall: (2 Replies)
Discussion started by: Exposure
2 Replies
10. Solaris
Hi Guys,
I want to take backup of a ZFS file system on tape drive.
Can anybody help me with this?
Thanks,
Pras (0 Replies)
Discussion started by: prashant2507198
0 Replies
TS(4) Kernel Interfaces Manual TS(4)
NAME
ts - TS-11 magtape interface
SYNOPSIS
/sys/conf/SYSTEM:
NTS ts_drives # TS11
/etc/dtab:
#Name Unit# Addr Vector Br Handler(s) # Comments
ts ? 172520 224 5 tsintr # ts11 driver
major device number(s):
raw: 8
block: 2
minor device encoding:
bits 0003 specify TS drive
bit 0004 specifies no-rewind operation
bit 0010 ignored
DESCRIPTION
The ts-11 combination provides a standard tape drive interface as described in mtio(4). The ts-11 operates only at 1600 bpi, and only one
transport is possible per controller.
FILES
/dev/MAKEDEV script to create special files
/dev/MAKEDEV.local script to localize special files
SEE ALSO
mt(1), tar(1), tp(1), mtio(4), ht(4), tm(4), dtab(5), autoconfig(8)
DIAGNOSTICS
ts%d: no write ring. An attempt was made to write on the tape drive when no write ring was present; this message is written on the termi-
nal of the user who tried to access the tape.
ts%d: not online. An attempt was made to access the tape while it was offline; this message is written on the terminal of the user who
tried to access the tape.
ts%d: hard error bn%d xs0=%b xs1=%b xs2=%b xs3=%b. A hard error occurred on the tape at block bn; status registers 0-3 are printed in
octal and symbolically decoded as bits.
ts%d: addr mod 4 != 0. The address of a TS-11 command packet was not on an even longword boundary.
BUGS
If any non-data error is encountered on non-raw tape, it refuses to do anything more until closed.
The device lives at the same address as a tm-11 tm(4).
3rd Berkeley Distribution January 28, 1988 TS(4)