Disk drive and Ultra 10 Post: 18489

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

hard drive in Sun Ultra 10

What are the options on upgrading disk space in an Ultra 10 workstation? Sun states they are EIDE drives, are they standard or Sun specific? Thanks

2. Filesystems, Disks and Memory

Tape Drive Connected to a Sun Ultra 10/Solaris 2.7

I have a Sun Ultra 10/Solaris 2.7 with a differential SCSI card connected to a Supter DLt1 Tape Drive. When I boot the machine, and I do a probe-scsi-all in the very beginning of the boot process. It shows up correctly. If I wait for the boot process to proceed and then I do a probe-scsi-all, I get...

3. Solaris

Parallel Tape Drive on Ultra 5?

Hello. Maybe a Solaris guru can help me out. I would like to connect a parallel QIC tape drive to an Ultra 5 to write backups. Is this possible? If I remember my Unix edu years ago, there is a way to tell the system that there is blocking device on the parallel port. Thanks for your...

4. Filesystems, Disks and Memory

Add a new disk to Ultra 10

I am using an ultra 10 with Solaris 9.... I want to add a new disk that I can play around with partitions, maybe mirroring - that type of thing.. Its a test box.. I need help on what I can buy - and what I need, cables etc to add new disk and install it... Anyone got any pointers?

5. UNIX for Dummies Questions & Answers

Newbie: Sun Ultra 5 Disk Replacement

I have just started getting into unix and aquired a Sun Ultra 5 however the disk failed and I want to replace it with a spare maxtor 40Gb i have lying around. I need to partition and format the disk from its old windows format. I have looked up info on the format command in solaris 9 and I think i...

6. Solaris

Problem with SCSI DAT drive on Ultra 10

I will be honest I am quite new to UNIX and Solaris so this may be a simple thing. I have just purchased a Sun (rebranded HP obviously) DAT DDS3 SCSI tape drive for my Sun Ultra 10 running Solaris 10. I have previously fitted a SCSI card to the box which has configured ok and can be seen from...

7. Solaris

Ultra 60 strange disk problems

Hello, I just bought a nice ultra 60 with 2x36gb scsi disks (fujitsu MAJ3364MC, sun partnr 540-4521). If i do a probe-scsi-all in obp the disk anounces itself as SUN36G. In a booted system however, I can only use 9 gb and the disk is seen in format as 9.0 gb. My own wild uneducated...

8. Solaris

Connect an External SCSI Hard Drive to Ultra 80

Guys, I have googled and checked this forum in detail and couldn't find any satisfactory answers for my problem. I am trying to connect a external SCSI hard Drive(Sea Gate) to a Ultra 80. I connected it powered it up and at OK prompt did : boot -r system comes up and complains about not...

9. Solaris

Sun Ultra 2 Hard Drive Replacement

Hi all...I have an old Sun Ultra 2 running SunOS 5.7 (I know old). These machines have 2 hard drives and one of my drives fried. I bought some replacement drives and wanted to a simple "dd" command from my one good drive to copy all to the new replacement drive. The new drives however give me a...

10. UNIX for Advanced & Expert Users

The disk drive for /tmp is not ready yet or not present && the disk drive for /boot is not ready yet

Hi Team when I boot the server I get this 2 errors : the disk drive for /tmp is not ready yet or not present the disk drive for /boot is not ready yet or not present and its stay like that , I m using Ubuntu 12.04 please if someone have any idea how to fix that problem .

LEARN ABOUT NETBSD

njata

NJATA(4)						   BSD Kernel Interfaces Manual 						  NJATA(4)

NAME

     njata -- Workbit NinjaATA-32 CardBus IDE controller driver

SYNOPSIS

     njata* at cardbus? function ?
     njata* at cardbus? function ? flags 0x01	  # with wait 0x01

DESCRIPTION

     The njata driver provides support for the following Workbit Bus-Master CardBus IDE controller chips:

	   NinjaATA-32Bi  CardBus / PCMCIA dual mode IDE controller (``DuoATA'').  This controller is mainly used for portable drives.	This
			  driver supports the CardBus mode.

	   NPATA-32	  CardBus IDE controller.  This controller is widely used for CardBus CompactFlash adapters.

     These controllers are capable of bus-mastering for ATA PIO transfer.  The njata driver uses the bus-mastering PIO transfer unless transfer
     buffer is unaligned, and significantly reduces CPU usage for PIO-only ATA devices compared with usual PIO transfer.

CONFIGURATION

     The optional flags parameter is the ``wait'' value for ATA transfers.  Some combinations of host and device may fail without flags parameter
     or flags 0x00.  In this case try adding wait values like flags 0x01 or flags 0x11 (the wait parameter is composed of two 4bit values).
     Smaller wait values should be faster.  Too long waits may cause transfer errors.

SEE ALSO

     ata(4), atapi(4), cardbus(4), intro(4), wd(4), wdc(4)

HISTORY

     The njata device driver first appeared in NetBSD 4.0.

AUTHORS

     ITOH Yasufumi

BSD
								 September 7, 2006							       BSD

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

hard drive in Sun Ultra 10

Discussion started by: 98_1LE

2. Filesystems, Disks and Memory

Tape Drive Connected to a Sun Ultra 10/Solaris 2.7

Discussion started by: brv

3. Solaris

Parallel Tape Drive on Ultra 5?

Discussion started by: Plain Person

4. Filesystems, Disks and Memory

Add a new disk to Ultra 10

Discussion started by: frustrated1