Sponsored Content
Full Discussion: Printer buffer overflow
Top Forums UNIX for Dummies Questions & Answers Printer buffer overflow Post 14574 by JammerFSU on Saturday 2nd of February 2002 01:28:02 PM
Old 02-02-2002
Ok....

Check the following:

1) What type of port you are connected to.
a. Digi? if so.. what type of connection
rj45? db25?

b. Sallion? if so... why type of connection
rj45? db25?

2) What device are you connected to? You can check this by
lpstat -t and it should tell you the device this printer is
connected to.


3) In the /etc directory check the file inittab
look for the line that contains the device for the printer
and see what baud rate it is operating at. Also, check
for any additional protocol settings... xon/xoff etc..
make SURE there is not a getty process being respawned
on that port.


4) On the Okidata printer, enter into the setup mode for
the serial port and check the baud rate that's set there
and the protocol being used. xon/xoff etc...


There are several factors that usually affect printing problems
when using serial connections.

Is your cable configured for the protocol you are using?
Do your printers serial port settings match the settings on
you I/O device?


Stallion and Digi both have software utilities that can aid you in setting up a printer. You may want to delete the printer from the print que and use their utility to re-add the printer to the O/S

Digi uses mpi

Sallion uses easyadm


Digi and Stallion both have web-sites for trouble shooting printer problems.

www.digi.com

www.stallion.com

Let me know what you find... maybe we can fix your problem
 
CEIL(3) 						     Linux Programmer's Manual							   CEIL(3)

NAME
ceil, ceilf, ceill - ceiling function: smallest integral value not less than argument SYNOPSIS
#include <math.h> double ceil(double x); float ceilf(float x); long double ceill(long double x); Link with -lm. Feature Test Macro Requirements for glibc (see feature_test_macros(7)): ceilf(), ceill(): _BSD_SOURCE || _SVID_SOURCE || _XOPEN_SOURCE >= 600 || _ISOC99_SOURCE || _POSIX_C_SOURCE >= 200112L; or cc -std=c99 DESCRIPTION
These functions return the smallest integral value that is not less than x. For example, ceil(0.5) is 1.0, and ceil(-0.5) is 0.0. RETURN VALUE
These functions return the ceiling of x. If x is integral, +0, -0, NaN, or infinite, x itself is returned. ERRORS
No errors occur. POSIX.1-2001 documents a range error for overflows, but see NOTES. CONFORMING TO
C99, POSIX.1-2001. The variant returning double also conforms to SVr4, 4.3BSD, C89. NOTES
SUSv2 and POSIX.1-2001 contain text about overflow (which might set errno to ERANGE, or raise an FE_OVERFLOW exception). In practice, the result cannot overflow on any current machine, so this error-handling stuff is just nonsense. (More precisely, overflow can happen only when the maximum value of the exponent is smaller than the number of mantissa bits. For the IEEE-754 standard 32-bit and 64-bit floating- point numbers the maximum value of the exponent is 128 (respectively, 1024), and the number of mantissa bits is 24 (respectively, 53).) The integral value returned by these functions may be too large to store in an integer type (int, long, etc.). To avoid an overflow, which will produce undefined results, an application should perform a range check on the returned value before assigning it to an integer type. SEE ALSO
floor(3), lrint(3), nearbyint(3), rint(3), round(3), trunc(3) COLOPHON
This page is part of release 3.44 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/. 2010-09-20 CEIL(3)
All times are GMT -4. The time now is 06:55 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy