Replacing a Disk in a ODS/SVM Mirror

9 More Discussions You Might Find Interesting

1. Solaris

Replacing a failed disk using SVM

Hi Please can you help me on replacing or removing a faulty disk drive on a SUN NETRA X4250server with 4 internal drives only. the format comand show me the following: format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0t0d0 <drive type unknown> ...

2. HP-UX

What is the difference between DRD and Root Mirror Disk using LVM mirror ?

what is the difference between DRD and Root Mirror Disk using LVM mirror ?

3. AIX

Clone or mirror your AIX OS larger disk to smaller disk ?

hello folks, I have a 300GB ROOTVG volume groups with one filesystem /backup having 200GB allocated space Now, I cannot alt disk clone or mirrorvg this hdisk with another smaller disk. The disk size has to be 300GB; I tried alt disk clone and mirrorvg , it doesn't work. you cannot copy LVs as...

4. AIX

replacing mirror disk

Hi Admins, I am new into aix.I was surfing aix pages and reading how to replace failed mirror disks.I read in one of the posts that we have to reboot the server to replace the disk. actually i was a HPUX admin and many times replaced root mirror disk online.Ofcourse it was hot swappable. ...

5. Solaris

Replacing a hard disk (SVM) with a soft partition?

The following is the summarry:- 1) Four disks in server ie (c1t0d0. c1t1d0, c1t2d0, c1t3d0). c1t2d0 is the disk to be replaced. c1t0d0 and c1t2d0 are mirrors. c1t1d0 and c1t3d0 are mirrors. Metadb to be deleted is in c1t2d0s7 a) Mirror d35 has 2 submirrors d38 and d39 d38 is a stripe...

6. Solaris

What is mirror and sub mirror in RAID -1 SVM

Hi , I am new to SVM .when i try to learn RAID 1 , first they are creating two RAID 0 strips through metainit d51 1 1 c0t0d0s2 metainit d52 1 1 c1t0d0s2 In the next step metainit d50 -m d51 d50: Mirror is setup next step is metaattach d50 d52 d50 : submirror d52 is...

7. Solaris

Removing Disk from SVM

Hi All, I have to remove the disk from SVM. Kindly guide me or suggest me some link where in I can steps to remove SVM from Solaris 10 .Also I have one metaset which require deletion. Thanks in anticipation!

8. Solaris

Disk Replacement SVM

Hello, Can someone advise the proper procedure for replacing a mirrored disk in SVM. I have checked the docs and various websites but the procedure seems to vary. This is what I would do... 1. Remove the db replicas from the bad disk. 2. Detach it from the mirror 3. Clear it with...

9. Solaris

Disk replacement with svm

I dont even know what raid level this is, but its raid 5 mirrored from the looks of it. I have a failed disk (t12) within this mirror. What is the best way to replace this disk? 2 things concern me, isn't there a command to prepare the disk for a hot swap? and what should i do with the...

LEARN ABOUT OPENDARWIN

installgrub

installgrub(1M) 														   installgrub(1M)

NAME

       installgrub - install GRUB in a disk partition or a floppy

SYNOPSIS

       /sbin/installgrub [-fm] stage1 stage2 raw-device

       The installgrub command is an -only program. GRUB stands for GRand Unified Bootloader.

       installgrub  installs  GRUB  stage  1  and  stage  2  files on the boot area of a disk partition. If you specify the -m option, installgrub
       installs the stage 1 file on the master boot sector of the disk.

       The installgrub command accepts the following options:

       -f

	   Suppresses interaction when overwriting the master boot sector.

       -m

	   Installs GRUB stage1 on the master boot sector interactively.

       The installgrub command accepts the following operands:

       stage1

	   The name of the GRUB stage 1 file.

       stage2

	   The name of the GRUB stage 2 file.

       raw-device

	   The name of the device onto which GRUB code is to be installed. It must be a character device that is readable and writable.  For  disk
	   devices,  specify  the  slice  where  the  GRUB  menu  file	is  located.  (For Solaris it is the root slice.) For a floppy disk, it is
	   /dev/rdiskette.

       Example 1: Installing GRUB on a Hard Disk Slice

       The following command installs GRUB on a system where the root slice is c0d0s0:

       example# /sbin/installgrub /boot/grub/stage1 
		/boot/grub/stage2 /dev/rdsk/c0d0s0

       Example 2: Installing GRUB on a Floppy

       The following command installs GRUB on a formatted floppy:

       example# mount -F pcfs /dev/diskette /mnt
       # mkdir -p /mnt/boot/grub
       # cp /boot/grub/* /mnt/boot/grub
       # umount /mnt
       # cd /boot/grub
       # /sbin/installgrub stage1 stage2 /dev/rdiskette

       /boot/grub

	   Directory where GRUB files reside.

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

       boot(1M), fdisk(1M), fmthard(1M), kernel(1M), attributes(5)

       Installing GRUB on the master boot sector (-m option) overrides any boot manager currently installed on the machine. The system will always
       boot the GRUB in the Solaris partition regardless of which fdisk partition is active.

								    24 May 2005 						   installgrub(1M)

Solaris