IPSEC_SECRETS(8) Executable programs IPSEC_SECRETS(8)NAME
ipsec_secrets - prompt for PIN codes and passphrases
SYNOPSIS
ipsec secrets
DESCRIPTION
Secrets is an alias for ipsec auto --rereadsecrets and rereads all the secrets in the ipsec.secrets file. The user will be prompted for all
private RSA keys protected by PIN codes and passphrases.
SEE ALSO ipsec.secrets(5)HISTORY
Written for Libreswan <http://www.libreswan.org> by Andreas Steffen.
BUGS
None
AUTHOR
Paul Wouters
placeholder to suppress warning
libreswan 12/16/2012 IPSEC_SECRETS(8)
Check Out this Related Man Page
IPSEC_TRAP_COUNT(5) Executable programs IPSEC_TRAP_COUNT(5)NAME
trap_count - KLIPS statistic on number of ACQUIREs
SYNOPSIS
cat /proc/net/ipsec/stats/trap_count
OBSOLETE
Note that trap_count is only supported on the classic KLIPS stack. It is not supported on any other stack and will be completely removed in
future versions. A replacement command still needs to be designed
DESCRIPTION
/proc/net/ipsec/stats/trap_count is a read-only file. It contains a hexadecimal number which records the number of attempts to send
PF_ACQUIRE messages. Only those recorded by trap_sendcount were actually successfully passed to userland. Note that the userland may still
have lost them on its own.
FILES
/proc/net/ipsec/stats/trap_sendcount
SEE ALSO ipsec(8), ipsec_pf_key(5), trap_sendcount(5), pluto(8)HISTORY
Written for the Linux FreeS/WAN project <http://www.freeswan.org/> by Michael C. Richardson <mcr@freeswan.org>
AUTHOR
Paul Wouters
placeholder to suppress warning
libreswan 01/10/2014 IPSEC_TRAP_COUNT(5)
Hello! I have some trouble trying to configure a VPN with two gateways. One of them uses IPSec with a single key, 256bits length, specified in /etc/ipsec.secrets. As FreeSwan manual page says, if i put esp=3des-md5-96, will be used a "64bit IV key (internally generated), a 192bit 3des ekey and a... (3 Replies)
Hi,
I am trying to establish vpn between my linux server and cisco asa at client side.
I installed openswan on my cent os.
Linux Server
eth0 - 182.2.29.10
Gateway - 182.2.29.1
eth1 - 192.9.200.75
I have simple IPtables Like
WAN="eth0"
LAN="eth1" (0 Replies)