compaq presario v3000 Notebook PC not booting

10 More Discussions You Might Find Interesting

1. Hardware

HP Compaq 6710 - Intel(R) PRO/Wireless 3945ABG/BG

Hi gurus, I am trying make wireless card working but I am stuck. Tried following: Hardware button for wifi is enabled (wifi led lights): # modprobe -r iwl3945 # modprobe iwl3945 # ifconfig wlan0 up SIOCSIFFLAGS: No such device # ifup wlan0 /sbin/ifup: configuration for wlan0 not...

2. Hardware

HP Compaq 6710 - Strange network problems

Hi gurus, I am experiencing strange networks problems. I am trying to teather internet from HTC Desire S with Android. Basicly I followed those instructions: https://wiki.archlinux.org/index.php/Android_Tethering#Procedure 1.) Enable USB Debugging - Phone: Settings --> Applications -->...

3. HP-UX

DST change on Compaq Tru64

Hello all, I hope someone can help me. We have Compaq Tru64 UNIX V5.1B (Rev. 2650). By latest Belarus government act Europe/Minsk timezone was changed to GMT+3 without DST (was GMT+2 with DST). Please advice how to do changes on our machine. Thank You in advance, md1982

4. Linux

OS for Compaq Presario 1685

Hi, Trying to install a small OS to run this old laptop. Compaq Presario 1685, circa '98 Processor: AMD K6-2 380 MHz Data Bus Speed: 66 MHz Ram Installed 32 MB moduled Hard Drive: 4.3 GB DVD-ROM Burned in a CD �PUPPY-4.3beta1-k2.6.25.16-v423-SCSI�, tried to boot with it several times BUT...

5. SuSE

cannot load linux on compaq tc1000

Any one try this. I am getting errors or it just hangs up. I have tried redhat, suse,ubuntu etc but nothing will load. When i try to boot the live cd they boot up OK but then just hang after a while and the cd rom stop spinning etc. Just wondering if anyone has use this hdw and what linux...

6. SCO

SCO 5.0.5 on compaq presariolaptop C773tu

i want to install sco unix 5.0.5 on compaq presario laptop c773tu dual boot with windos xp. the HDD is 160 GB RAM 2046 MB ddr2. I have created partitions and loaded Win XP While installing SCO Unix 5.0.5 i get the following problem 1)memory excessively fragmented. I get around it by sepcifying...

7. UNIX for Dummies Questions & Answers

Help In Compaq Tru64 UNix

Hi, I am new to UNIX. I need help in working with Compaq-UX TRU64 OS. How It work FTP Server? ANd MAil Server? and I have apach pprogram project and it work as HTTP Server. Also I need how can setup a new version of progrm on UNix like mozilla and adobe reader etc........... Thank...

8. SCO

compaq smart array 532

Trying to install Sco openserver on HP Proliant with this scsi controller but no scsi devices detected. Boot controller is set as the smart array 532 but SCSI diags do not detect any SCSI boot devices during boot sequence Any help appreciated

9. Filesystems, Disks and Memory

Compaq Scsi

Howto make Debian GNU/Linux install boot on a Compaq DeskPro XL 590 with Compaq SCSI diskdrive? The problem is that Compaq's Scsi controller sems to be odd. help please :)

10. Programming

HPUX and Compaq problem-urgent

Hi All Following is the lines of code which simply makes a structure of 1 bit member and 7 bit is unused.Then the structure is initialised with char pointer.The output on HPUX(BIG Endian) and Compaq(Little Endian) are different.On HPUX it gives zero and Compaq it gives 1. I never thought that the...

LEARN ABOUT PLAN9

bootp

BOOTP(8)						      System Manager's Manual							  BOOTP(8)

NAME

       bootp, rarpd, tftpd - Internet booting

SYNOPSIS

       ip/bootp [-d]

       ip/rarpd [-d] [-e etherdev]

       ip/tftpd [-dr] [-h homedir]

DESCRIPTION

       These  programs	support  booting over the Internet.  They should all be run on the same server to allow other systems to be booted.  Bootp
       and tftpd are used to boot everything; rarpd is an extra piece just for Suns.

       Bootp passes to Plan 9 systems their IP address, IP mask, default boot file,  default  file  server,  default  authentication  server,  and
       default	gateway.   These come from the network database file attributes ip, ipmask, bootf, fs, auth, and ipgw attributes respectively (see
       ndb(6) and ndb(8)).  The attributes come from the entry for the system, its subnet, and its network with the  system  entry  having  prece-
       dence, subnet next, and network last.  Bootp will answer requests only if it has been specifically targeted or if it has read access to the
       boot file for the requester.  The -d option causes debugging to be printed to standard output.

       Rarpd performs the Reverse Address Resolution Protocol, translating Ethernet addresses into IP addresses.  The options are:

       d      print debugging to standard output

       e      use the Ethernet mounted at /net/etherdev

       Tftpd transfers files to systems that are booting.  It runs as user none and can only  access  files  with  global  read  permission.   The
       options are:

       d      print debugging to standard output

       h      change  directory  to homedir.  The default is /lib/tftpd.  All requests for files with non-rooted file names are served starting at
	      this directory with the exception of files of the form xxxxxxxx.SUNyy.  These are Sparc kernel boot files where xxxxxxxx is the  hex
	      IP  address of the machine requesting the kernel and yy is an architecture identifier.  Tftpd looks up the file in the network data-
	      base using ipinfo (see ndb(2)) and responds with the boot file specified for that particular machine.  If no boot file is specified,
	      the transfer fails.  Tftpd supports only octet mode.

       r      restricts access to only files rooted in the homedir.

SOURCE

       /sys/src/cmd/ip

SEE ALSO

       ndb(6)

																	  BOOTP(8)

Windows & DOS: Issues & Discussions