LTO 3 on rp7400

10 More Discussions You Might Find Interesting

1. AIX

Filesets for IBM ultrium lto 5 (SAS)

i connect an ibm ultrium lto 5 (sas) to an 8204-e8a (v6.1 TL5 SP 1) then i do an cfgmgr and get message about missing filesets devices.pciex.1410ca03 devices.pciex.pciexclass.00107 devices.pciex.00107200 devices.pciex.pciex100.72.3 and a few others i try to find the filesets on the two OS...

2. Solaris

Sun E220R + HP (SCSI) LTO Ultrium Tape Drive

Hi all, this time I'd need a help from an advanced Solaris system admin :rolleyes: I attached a HP StorageWorks Ultrium 215 Tape Drives - Overview - c00059530 - HP Business Support Center to my Sun E220R and it got recognized immediately (probe-scsi-all). Now the operating system boot process...

3. Solaris

LTO replacement

Hi guys, I've changed the LTO3 device, but the OS (Solaris10) doesn't feel it. From the ok> prompt i've launched the probe-scsi-all command and it worked fine because i could see the new device; the from the ok> i booted the system (normal boot, probably a boot -r could be better..) and from...

4. AIX

p570 seeing LTO drive but not 3582 library (smc0)

I have a p570 running AIX 5.2 ml 10. We just got in a IBM 3582 library. The library is connected directly to the lpar via fibre cable. I've installed: Atape.driver 11.7.7.0 atldd.driver 6.8.4.0 After a reboot, I can see the one tape drive: ...

5. HP-UX

External DVD-ROM drive issue whether it is working or not? on HP rp7400

Please help me > How to diag the external DVD-ROM drive issue whether it is working or not? on HP 9000 server rp7400 I needed to install HP 11i v1 using external DVD-ROM drive on HP 9000 server rp7400. While boot in CO> “search” command is not showing DVD-ROM device only showing all disks >...

6. Solaris

Configure New LTO-2 Tape Drive

Can I do this live? Or, do I need to do a probe-scsi-all after doing a stop/A?

7. HP-UX

LTO Compatibility

Is any one told me that LTO3 tape Cartridge is compatible with LTO2 Tape Drive.

8. UNIX for Dummies Questions & Answers

LTO multivolume restoration problem in SELS9

Can anybody help me ? ? Previously data was taken multi volume LTO Tape backup in Red hat Linux by following command : tar -cvf /dev/rmt/tps6d7v -b 1000 -M filenames , now i try to Restore it in SELS9 by following command : tar -xvf /dev/st1 -b 1000 -M filenames , it extracts only part of the...

9. AIX

AIX 5.3 and PV110T LTO tape Drivers?

Hey anyone have the hot news on where to find out if This tape will work with my AIX 5.3? a Dell PV110T ~ AIX Base Unit: PV110T,LTO-3,400/800GB,EXT PowerVault 110T, LTO-3 400/800GB, External Drive-R (222-2100) Hard Drive Controller: External 4M SCSI Cable VHDCI/68 pin for Tape...

10. UNIX for Dummies Questions & Answers

Backup Differnet Unix OS Using Single LTO

Hi Gurus, I would like to clarify some doubts regarding a backup strategy. I have been working on various *NIX as AIX,Solaris and Linux. I would like to design a backup procedure.WOuld it be possible for me to use a single LTO tape device to backup all the different server with different...

LEARN ABOUT NETBSD

pcscp

PCSCP(4)						   BSD Kernel Interfaces Manual 						  PCSCP(4)

NAME

     pcscp -- Advanced Micro Devices Am53c974 PCscsi-PCI SCSI driver

SYNOPSIS

     pcscp* at pci? dev ? function ?
     scsibus* at pcscp?

DESCRIPTION

     The pcscp driver provides support for the Advanced Micro Devices Am53c974 PCscsi-PCI SCSI controller and boards using this chip, including
     the Tekram DC-390 PCI SCSI host adapter.

     For Tekram DC-390U/UW/F PCI SCSI host adapters, use the siop(4) driver.

     For Tekram DC-395U/UW/F PCI SCSI host adapters, use the trm(4) driver.

SEE ALSO

     cd(4), ch(4), esp(4), intro(4), pci(4), scsi(4), sd(4), ss(4), st(4), uk(4), scsipi(9)

     http://www.amd.com/

BUGS

     The driver currently ignores EEPROM settings, which establish per-target parameters etc.

BSD
								 February 21, 1999							       BSD

UNIX for Dummies Questions & Answers