my first unix.. but i just wanted server. but some issues:
needs 2nd cpu (not installed) can i just add second processor? has slot
1gb ram i can buy more, but dont want to unless i can get this working
has 6 hd raid.. not sure how set up think 2x 3 disk raids (36gb)
4 hds say ddd but im not sure
i used boot cd to get system up.
wondered how i can find what hard drives are bad?
i ask because it boots up unixware, so i think its there. i want to install server 2003/8/12 on 2 hdd mirror, but wanted to keep unix on side.
any thoughts? was hoping for unix/linux help to access hard drives. its raid.
see whats in there, if its good, etc.
The x235 is a great server - I used to look after several - although a bit long in the tooth now. Obviously there are disks in it and it can be booted from them - there are several options here.
It is unlikely that you will be able to bring it up properly on the existing disks without a username and password, so you could get a Linux live CD and boot from that - from memory the x235 was certified on Suse Linux 8.3 - mount the boot device and hand edit the /etc/shadow file.
To find the bad drives I'd suggest that the easiest way is to pull all drives except the bottom one which I think will show up as /dev/sda and then try and mount using the following command;
From there you may be able to see the /mnt/etc directory and edit the shadow file.
As to installing the second OS, you would be correct in installing it on an other hdd - but you will have to configure Grub.
you could get a Linux live CD and boot from that - from memory the x235 was certified on Suse Linux 8.3 - mount the boot device and hand edit the /etc/shadow file.
To find the bad drives I'd suggest that the easiest way is to pull all drives except the bottom one which I think will show up as /dev/sda and then try and mount using the following command;
From there you may be able to see the /mnt/etc directory and edit the shadow file.
As to installing the second OS, you would be correct in installing it on an other hdd - but you will have to configure Grub.
Regards
Dave
thanks, i got the linux cd, now hoped you might be able to help me. im new to linux, i work microsoft. my first attempt.
hoped you might be better able to explain what to do when i boot from cd with regards to the commands above.
and how do i check the status of the scsi drives? i think one might be bad...any help appreciated, thanks
Hi there.
I used to use linux a lot a number of years ago but it has been quite a while so ?I really consider myself a beginner again.
I have an old IBM eServer X Series 335 machine and I want to get it back up and running for a number of reasons. I knew that one of the SCSI drives was bad and... (2 Replies)
Hi There,
I have zero information and zero knowledge for IBM virtual machine except Amazon cloud and VMware ESXi (Only Linux OS available).
Anyone could provide me the following answer -
Can IBM VM been deploy on X86 and X64 (Intel Chip)?
If answer is yes any chance to deploy AIX OS... (13 Replies)
High,
I have a simulator application running on unixware 2.1, there are no original installation CDs for the application. is it possible to copy directories and configuration files, related to the installed application, from unixware 2.1 to other system running Unixware 7.1.1 (replacing Unixware... (0 Replies)
Dear All,
I have a HP Netserver LH3 server which has unixware 7 os with oracle. Suddenly it shows a error message that " Raw Stack Dump beigns at 0xFFFDABIC...
Generating Selective dump
Storing system memory image for crash analysis....
#scanning memory....dumping to disk
(Press any key to... (0 Replies)
Hello,
I am having performance problem when , i ported a c code from Unixware 2.1 to Unixware 7.0.0.
My program establishes a synchornous connection with the client in a windows OS and then sends and receives messsages using the recv and send calls.
What i hyave noticed is that after a... (0 Replies)
I have a Unixware OS and a HP Business Inkjet printer. I am unable to print from Unixware in landscape mode. I have tried filters and have failed every time. Any advice would be greatly appreciated. (6 Replies)