you could get a Linux live CD and boot from that - from memory the x235 was certified on Suse Linux 8.3 - mount the boot device and hand edit the /etc/shadow file.
To find the bad drives I'd suggest that the easiest way is to pull all drives except the bottom one which I think will show up as /dev/sda and then try and mount using the following command;
From there you may be able to see the /mnt/etc directory and edit the shadow file.
As to installing the second OS, you would be correct in installing it on an other hdd - but you will have to configure Grub.
Regards
Dave
thanks, i got the linux cd, now hoped you might be able to help me. im new to linux, i work microsoft. my first attempt.
hoped you might be better able to explain what to do when i boot from cd with regards to the commands above.
and how do i check the status of the scsi drives? i think one might be bad...any help appreciated, thanks
I have a Unixware OS and a HP Business Inkjet printer. I am unable to print from Unixware in landscape mode. I have tried filters and have failed every time. Any advice would be greatly appreciated. (6 Replies)
Hello,
I am having performance problem when , i ported a c code from Unixware 2.1 to Unixware 7.0.0.
My program establishes a synchornous connection with the client in a windows OS and then sends and receives messsages using the recv and send calls.
What i hyave noticed is that after a... (0 Replies)
Dear All,
I have a HP Netserver LH3 server which has unixware 7 os with oracle. Suddenly it shows a error message that " Raw Stack Dump beigns at 0xFFFDABIC...
Generating Selective dump
Storing system memory image for crash analysis....
#scanning memory....dumping to disk
(Press any key to... (0 Replies)
High,
I have a simulator application running on unixware 2.1, there are no original installation CDs for the application. is it possible to copy directories and configuration files, related to the installed application, from unixware 2.1 to other system running Unixware 7.1.1 (replacing Unixware... (0 Replies)
Hi There,
I have zero information and zero knowledge for IBM virtual machine except Amazon cloud and VMware ESXi (Only Linux OS available).
Anyone could provide me the following answer -
Can IBM VM been deploy on X86 and X64 (Intel Chip)?
If answer is yes any chance to deploy AIX OS... (13 Replies)
Hi there.
I used to use linux a lot a number of years ago but it has been quite a while so ?I really consider myself a beginner again.
I have an old IBM eServer X Series 335 machine and I want to get it back up and running for a number of reasons. I knew that one of the SCSI drives was bad and... (2 Replies)
Discussion started by: filch2
2 Replies
LEARN ABOUT REDHAT
nwfstime
NWFSTIME(1) nwfstime NWFSTIME(1)NAME
nwfstime - Display / Set a NetWare server's date and time
SYNOPSIS
nwfstime [ -h ] [ -S server ] [ -U user name ] [ -P password | -n ] [ -C ] [ -s ]
DESCRIPTION
nwfstime displays a NetWare server's date and time. You can also set a NetWare server's date and time from the local time.
OPTIONS -h
With -h nwfstime prints a little help text.
-S server
is the name of the server you want to use.
-U user
user is the user name to use for login. To set the server's time, you need supervisor privileges.
-P password
password is the password to use for login. If neither -n nor -P are given, and the user has no open connection to the server, nwfstime
prompts for a password.
-n
-n should be given if no password is required for the login. As you need supervisor privileges for setting the date and time, this
option is probably not used very often.
-C
By default, passwords are converted to uppercase before they are sent to the server, because most servers require this. You can turn off
this conversion by -C.
-s
With -s, nwfstime sets the file server's date and time according to the local date and time.
nwfstime 12/10/1996 NWFSTIME(1)