Suse Ent 10 SP3 won't boot

8 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

New kernel won't boot

I compiled new kernel in linux 10.04 called linux-2.6.26.8-xenomai, it runs alongside the other kernel, but when I want to boot it I get an error message saying: Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/sda5 does not exist. After making the modules and headers I made the...

2. UNIX for Dummies Questions & Answers

Suse 10 SP3 won't ping hostname

hi guys I got something I haven't been able to fix I configure a Linux Suse 10 box, added static IP, DNS (resolv), gateway (routes) but I am not able to ping other servers by name but nslookup works and the server can navigate on internet check below the problematic server is server-host20 ...

3. AIX

won't mount /usr...won't boot fully

Hello: NOOB here. I attempted to use smit mkcd. Failed on first attempt, not enough space. 2nd attempt tried to place iso on /usr, not enough space there. Cleanup ran for about 5 minutes after aborting. Now AIX won't boot. LCD display on 7029-6E3 says: 0517 MOUNT /USR. Attempted to boot from CD...

4. UNIX for Dummies Questions & Answers

Linux won't boot

I'm trying to install Fedora 9 on a Dell OptiPlex GX300 machine. The instalation runs properly, but when the computer restarts after the instalation, it simply won't boot, like there's no OS installed. I tried diffrent Linux distributions, but nothing works. This are the partitions, maybe it's...

5. Solaris

Ultra 60 won't boot

I just was given an Ultra 60 that I'm trying to get started so that I can re-load the system with Solaris 10. I can't seem to get the system to boot past the initial memory check. I've tried to do an Stop-A to get to the eeprom, but can't do that. My next step is to try to send a break from the...

6. Solaris

cannot find boot device and won't boot off cdrom

I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me...

7. AIX

server won't boot

Hi all , i was trying to upgrade firmware on machine 7028-6E4 and it failed . Now machine does not boot anymore , i can not get SMC menu either ... What are my options ? Thanks, Rahim

8. Solaris

Solaris (9) won't boot!

Hi, I've just bought an Ultra 60 running solaris 9 (or so I've been led to believe). When I start up, it looks for a (presumably) domain/network to hook up to and the following messages are displayed: Boot device: net file and args: Network link setup failed Please check cable and try...

LEARN ABOUT OSF1

reboot

reboot(2)							System Calls Manual							 reboot(2)

NAME

       reboot - Reboots system or halts processor

SYNOPSIS

       #include <sys/reboot.h>
       void reboot(	 int howto );

PARAMETERS

       Specifies a mask of options.

DESCRIPTION

       The reboot() function restarts the system.  The startup is automatic and brings up /vmunix in the normal, nonmaintenance mode.  The calling
       process must have superuser privilege to run this function successfully.  However, a reboot is invoked automatically in the event of  unre-
       coverable system failures.

       The  following options, defined in the sys/reboot.h include file are passed to the new kernel or the new bootstrap and init programs.  They
       are supplied as values to the howto parameter.  The default, causing the system to reboot in its usual fashion.	Dump kernel memory  before
       rebooting; see the savecore command for more information.  The processor is simply halted; no reboot takes place.  The disks are not sync'd
       before the processor is halted or rebooted.  Normally, the disks are sync'd (see the sync() command) before  the  processor  is	halted	or
       rebooted.  Because the disks are not sync'd with the RB_NOSYNC option, loss of data may result from using it.

       When  no options are given (that is, RB_AUTOBOOT is used), the system is rebooted from file vmunix in the root file system of unit 0 (zero)
       of a disk chosen in a processor-specific way.  (see the fsck command).

RETURN VALUES

       If successful, this call does not return.  Otherwise, a -1 is returned and errno is set to indicate the error.

ERRORS

       If the reboot() function fails, errno may be set to the following value: The calling process does not have appropriate privilege.

RELATED INFORMATION

       Commands: crashdc(8),

       halt(8), init(8), reboot(8), savecore(8) delim off

																	 reboot(2)

UNIX for Dummies Questions & Answers