-->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" Note: A "Service" is not itself a "Container",
so you may not define subcomponents such as "Valves" at this level.
Documentation at /docs/config/service.html
-->
<Service name="Catalina">
<!--The connectors can use a shared executor, you can define one or more named thread pools-->
<!--
<Executor name="tomcatThreadPool" namePrefix="catalina-exec-"
maxThreads="150" minSpareThreads="4"/>
-->
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Documentation at :
Java HTTP Connector: /docs/config/http.html (blocking & non-blocking)
Java AJP Connector: /docs/config/ajp.html
APR (HTTP/AJP) Connector: /docs/apr.html
Define a non-SSL HTTP/1.1 Connector on port 8080
-->
<Connector port="8080" protocol="HTTP/1.1"
connectionTimeout="20000"
redirectPort="8443" />
<!-- A "Connector" using the shared thread pool-->
<!--
<Connector executor="tomcatThreadPool"
port="8080" protocol="HTTP/1.1"
connectionTimeout="20000"
redirectPort="8443" />
-->
<!-- Define a SSL HTTP/1.1 Connector on port 8443
This connector uses the JSSE configuration, when using APR, the
connector should be using the OpenSSL style configuration
described in the APR documentation -->
<!--
<Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true"
maxThreads="150" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" />
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host).
Documentation at /docs/config/engine.html -->
<!-- You should set jvmRoute to support load-balancing via AJP ie :
<Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1">
-->
<Engine name="Catalina" defaultHost="localhost">
<!--For clustering, please take a look at documentation at:
/docs/cluster-howto.html (simple how to)
/docs/config/cluster.html (reference documentation) -->
<!--
<Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/>
-->
<!-- The request dumper valve dumps useful debugging information about
the request and response data received and sent by Tomcat.
Documentation at: /docs/config/valve.html -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<!-- SingleSignOn valve, share authentication between web applications
Documentation at: /docs/config/valve.html -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all example.
Documentation at: /docs/config/valve.html -->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs"
prefix="localhost_access_log." suffix=".txt" pattern="common" resolveHosts="false"/>
-->
</Host>
</Engine>
</Service>
</Server>
--- Post updated at 02:58 PM ---
tell me what im missing, its not editing the file. but if i will run that on the server one by one. It works.
Code:
for i in server 1 server2}; do echo -n $i ""; ssh $i 'sudo sed -i "/<Connector port='8009'.*\tom/>/ s#.*#<!-- & -->#" /home/user1/bb'; done
-->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" Note: A "Service" is not itself a "Container",
so you may not define subcomponents such as "Valves" at this level.
Documentation at /docs/config/service.html
-->
<Service name="Catalina">
<!--The connectors can use a shared executor, you can define one or more named thread pools-->
<!--
<Executor name="tomcatThreadPool" namePrefix="catalina-exec-"
maxThreads="150" minSpareThreads="4"/>
-->
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Documentation at :
Java HTTP Connector: /docs/config/http.html (blocking & non-blocking)
Java AJP Connector: /docs/config/ajp.html
APR (HTTP/AJP) Connector: /docs/apr.html
Define a non-SSL HTTP/1.1 Connector on port 8080
-->
<Connector port="8080" protocol="HTTP/1.1"
connectionTimeout="20000"
redirectPort="8443" />
<!-- A "Connector" using the shared thread pool-->
<!--
<Connector executor="tomcatThreadPool"
port="8080" protocol="HTTP/1.1"
connectionTimeout="20000"
redirectPort="8443" />
-->
<!-- Define a SSL HTTP/1.1 Connector on port 8443
This connector uses the JSSE configuration, when using APR, the
connector should be using the OpenSSL style configuration
described in the APR documentation -->
<!--
<Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true"
maxThreads="150" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" />
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host).
Documentation at /docs/config/engine.html -->
<!-- You should set jvmRoute to support load-balancing via AJP ie :
<Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1">
-->
<Engine name="Catalina" defaultHost="localhost">
<!--For clustering, please take a look at documentation at:
/docs/cluster-howto.html (simple how to)
/docs/config/cluster.html (reference documentation) -->
<!--
<Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/>
-->
<!-- The request dumper valve dumps useful debugging information about
the request and response data received and sent by Tomcat.
Documentation at: /docs/config/valve.html -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<!-- SingleSignOn valve, share authentication between web applications
Documentation at: /docs/config/valve.html -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all example.
Documentation at: /docs/config/valve.html -->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs"
prefix="localhost_access_log." suffix=".txt" pattern="common" resolveHosts="false"/>
-->
</Host>
</Engine>
</Service>
</Server>
--- Post updated at 02:58 PM ---
tell me what im missing, its not editing the file. but if i will run that on the server one by one. It works.
Code:
for i in server 1 server2}; do echo -n $i ""; ssh $i 'sudo sed -i "/<Connector port='8009'.*\tom/>/ s#.*#<!-- & -->#" /home/user1/bb'; done
a couple of things:
1. server 1 is not the same as server1
2. I don't understand your sed line - it's not the same as I suggested. What's the meaning of \tom/?
3. shouldn't Connector port='8009' be Connector port="8009"?
4. are you trying to edit /home/user1/bb file on each server?
5. Given your expanded sample input, sed should probably look like: sed '/<Connector port="8009".*\/>/ s#.*#<!-- & -->#'
Try to debug and adjust the settings/script one line at the time modifying the sed regex based on your sample input - slowly, one thing at the time - no need to rush.
Once again, try to come with the proper sed expression for a local sample file representative of the end target file content BEFORE jump into the ssh-ing script.
Hi,
I have a specific requirement to add text at the beginning and end of a plain text file. I tried to use "sed" with '1i' and '$a' flags but these required two separate "sed" commands separated with "|".
I am looking for some command/option to join these two in single command parameter.
... (6 Replies)
I need to comment the lines starting with pattern "exclude" or "exclude=". If the work exclude comes at any other part, ignore it. Also, ignore, excludes, excluded etc. Ie only comment the line starting with exclude.
File contents.
exclude
exclude=
hi I am excluded
excludes
excludes=
... (9 Replies)
How would you do vim copy line and paste at the beginning, middle, and end of another line. I know yy copies the whole line and p pastes the whole line, but on its own separate line. Sometimes I would like to copy a line to the beginning, middle, or end of another line. I would think this would be... (3 Replies)
Well here goes:
I tried to write a batch file that adds a specific fixed text to each line of an already existing text file.
for the adding text infront of each line I tried this:
for /F "delims=" %%j in (list.txt) do echo.STARTTEXT\%%j >> list.txt
for adding text after each line I... (0 Replies)
How can I specify special meaning characters like ^ or $ inside a regex range. e.g
Suppose I want to search for a string that either starts with '|' character or begins with start-of-line character.
I tried the following but it does not work:
sed 's/\(\)/<do something here>/g' file1
... (3 Replies)
Hello,
I have a file as follow
a
b
c
c
d
d
e
I would like to write a awk command to insert # from the first occurence of
"c" to the end of the files.
OUTPUT should be like this
a
b
#c (5 Replies)
Hello -
I am running Linux. I want to place a comment char at the beginning of a line in a file. For example:
testvar=`grep username /etc/people
sed -e 's/$testvar/#$testvar/g' /etc/people
I cannot get the above commands to put a comment at the beginning of the line.
Any... (3 Replies)
Hi, excuse me for my poor english.
My problem is that:
I have a File
i want to add to each line of that file two strings: one at the beginning of the line, one at the ending.
string1="abcd"
string2="efgh"
i want $string1 content $string2 for each line.
Is that possible? (3 Replies)
Is there an option, for cat, head, tail, or is there any way, to display a file from last line to first? For example, my file
looks like this:
aaaa
bbbb
cccc
eeee
and I would like to print or display it like this:
eeee
cccc
bbbb
aaaa
thanks (5 Replies)