hi,
i have a volume on a LUN of an EMC-storage and i need to increase the
size.
i could increase the size of the LUN on the EMC, i could increase the
size of the disk for solaris, but how can i tell the veritas volume
manager that the disk is larger now?
what i've done:
1. LUN on EMC
2. in the format menue i' ve chosen the type to autoconfigure, i can see
the bigger disk in solaris, then in the partitions menu i've created the
VTOC like before, only one slice on 7 (and 2 for backup, like before) for
the whole space.
but VxVM still means
# vxassist -g datadg maxsize
VxVM vxassist ERROR V-5-1-752 No volume can be created within the given
constraints
# vxassist -g datadg maxgrow datavol
VxVM vxassist ERROR V-5-1-1178 Volume datavol cannot be extend within the
given constraints
so i tried "vxdctl enable", but still the same... but i can still work
with the volume.. it must be written in the privatregion somewhere...
any ideas?
Using the terminology of vxvm, you take some disks and put them together to make a disk group. Then you carve volumes out of the disk group. It sounds like you have increased the size of a disk and you want vxvm to notice the increased size. Short of reinitializing the disk, I'm not sure you can do that. If you can, I feel that it would be one of the "disk" type commands rather than a "volume" type command. I think you're expected to add a disk to the disk group and then increase the volumes.
didn't know that option, it only comes with the Storage Foundation license, well, no problem here. still a strange behavior, but whatever, it works. I've tried it in a test-environment:
Code:
root@scnode2 # vxdisksetup -i c3t54d0
root@scnode2 # vxdg init testdg testhd=c3t54d0
root@scnode2 # vxassist -g testdg maxsize
Maximum volume size: 5681152 (2774Mb)
root@scnode2 # vxassist -g testdg make testvol 2774m layout=nostripe
root@scnode2 #
root@scnode2 # mkfs -F vxfs /dev/vx/rdsk/testdg/testvol
version 6 layout
5681152 sectors, 2840576 blocks of size 1024, log size 16384 blocks
largefiles supported
root@scnode2 #
root@scnode2 #
root@scnode2 # mount -F vxfs /dev/vx/dsk/testdg/testvol /mnt
root@scnode2 # while true; do mkfile 1024m /mnt/testfile && rm /mnt/testfile ; done &
4247
root@scnode2 #
#### now i increased the lun and configured the new size in solaris: ####
root@scnode2 # vxassist -g testdg maxgrow testvol
VxVM vxassist ERROR V-5-1-1178 Volume testvol cannot be extend within the given constraints
#### nothing... now reborg's hint ####
root@scnode2 # vxdisk -g testdg resize testhd
VxVM vxdisk ERROR V-5-1-8643 Device testhd: resize failed: Cannot remove last disk in disk group
#### seems he want to reinitialize, out of group and back in.... ####
#### temporaly i've added a second disk ###
root@scnode2 # vxdg -g testdg adddisk testhd2=c3t53d0
root@scnode2 # vxdisk -g testdg resize testhd
root@scnode2 # pgrep mkfile
6832
root@scnode2 #
root@scnode2 # vxdg -g testdg rmdisk testhd2
root@scnode2 # vxassist -g testdg maxgrow testvol
Volume testvol can be extended by 65441792 to: 71122944 (34728Mb)
root@scnode2 # vxresize -g testdg testvol 34728m
root@scnode2 # df -h /mnt
Filesystem size used avail capacity Mounted on
/dev/vx/dsk/testdg/testvol
34G 844M 31G 3% /mnt
root@scnode2 # pgrep mkfile
7240
root@scnode2 # ls -lh /mnt
total 554016
drwxr-xr-x 2 root root 96 Mar 27 10:29 lost+found
-rw------- 1 root other 1.0G Mar 27 10:30 testfile
root@scnode2 # vxdisk -g testdg list
DEVICE TYPE DISK GROUP STATUS
c3t54d0s2 auto:cdsdisk testhd testdg online
root@scnode2 #
it works live in my test, but veritas recommendation is to do it offline.
Hello all,
So I made a rookie mistake today. I forgot to remove my disk from my disk group, before running the following command:for i in `ioscan -fnN | awk /NO/'{print $3}'`
do
rmsf -H $i
done
I am trying to run the following command, but not having any luck obviously:vxdg -g dgvol1 rmdisk... (0 Replies)
Hello all,
i try to allocate the same LUN to two server (or more in the future)
i use solaris 10, vxvm (vxfs) for data and solaris zones and EMC DMX-4, i try to migrate solaris zones between servers in case of problem.
and this is what i want to do
- affect LUN to srv00124 and srv10155
-... (5 Replies)
I have VxVM 5.1 running on Solaris-10. I have to increase a application file-system and storage team gave me a lun. After scanning scsi port by cfgadm, I can see them in format output. I labelled it, but I am not able to see them in "vxdisk list".
I already tried commands -->
vxdctl enable... (4 Replies)
Hi,
I have a SAN LUN of 550 GB created as an ext3 partition of the entire lun and need to make the lun and partition larger... 600 GB
# fdisk -l /dev/sdj
Disk /dev/sdj: 590.5 GB, 590558003200 bytes
255 heads, 63 sectors/track, 71797 cylinders
Units = cylinders of 16065 * 512 = 8225280... (3 Replies)
Hi,
I have an iSCSI LUN attached to an AIX 5.3 box. It's initial size is 250GB, I just grew it on the SAN to 300GB, but AIX is not seeing the change. Right now I have some processes going and it's eating up the disk space. I need to grow this lun by atleast 30GB otherwise the process with bomb... (5 Replies)
I have a list of LUN ID, my task is to find if disk has been added or not. How do I do that? I have been searching the forum and not able to find answer.
thanks (4 Replies)
Previously , i remove the disk by
#vxdg -g testdg -k rmdisk testdg02
But i got error when i -k adddisk
bash-2.03# vxdisk list
DEVICE TYPE DISK GROUP STATUS
c0t0d0s2 auto:none - - online invalid
c0t1d0s2 auto:none ... (1 Reply)
VxVM:
How to add one more disk into v08 the stripe should change from 7/128 to 8/128
v v08 - ENABLED ACTIVE 8954292224 SELECT v08-01 fsgen
pl v08-01 v08 ENABLED ACTIVE 8954292480 STRIPE 7/128 RW
sd bkpdg35-01 v08-01 bkpdg35 17216 ... (0 Replies)