10 More Discussions You Might Find Interesting
1. Programming
Hello,
here's my situation: I have a C++ server running on a well known machine and a number of Java clients running on other machines (assumed as unknown) on the same LAN. What I want to achieve is full duplex communication between those applications, in order to exchange complex objects and data... (3 Replies)
Discussion started by: demerzel3
3 Replies
2. Solaris
Hi,
How to find whether the server is running with half duplex or full duplex. I tried with the following command ndd -get /dev/ but am not getting any output,. Is the command correct?
Also let me know how to change from half to full duplex. (1 Reply)
Discussion started by: rogerben
1 Replies
3. UNIX for Advanced & Expert Users
I would like to change half duplex to full duplex on solaris 5.5. I tried with below commands but they didnt work on solaris 5.5.
#ndd -set /dev/le adv_100fdx_cap 1 (6 Replies)
Discussion started by: csreenivas
6 Replies
4. SuSE
How do I configure full duplex on suse 8.2
I tried
ethtool -s eth0 speed 100 duplex full autoneg off
the above works but when I reboot the machine the configure was lost.
How do I configure full duplex so that when the machine get rebooted the configuration will stay.
My interface... (4 Replies)
Discussion started by: hassan2
4 Replies
5. Solaris
I need to change some Ip addresses for my servers to reflect in the NIS map.
I also need to force full duplex on the 10/100 cards & 1/2 duplex in the 10 cards.
I can change the IP by doing ifconfig <NIC card > plumb up <newip>.
Not quite sure on how to force the full / half duplex & how to... (2 Replies)
Discussion started by: Remi
2 Replies
6. Programming
what is meant by full duplex and half duplex?
b'coz in differences b\w hub and switch ,i heard lot this duplex word
so please help me (1 Reply)
Discussion started by: parvathy
1 Replies
7. UNIX for Dummies Questions & Answers
Dear Members,
I was reading a few posts and saw something about installing two Nics so one could use Full Duplex. I remember back in the day of dial up, you could have two modems and use one for upstream and one for downstream. This was called shotgunning. It seems that you can now do the same... (4 Replies)
Discussion started by: Phobos
4 Replies
8. UNIX for Dummies Questions & Answers
Ok at the moment I have a hub whit 5 computers connected to it. It's a 10/100 NetGear hub.
Ok I heard that there is some command I can run or a file I edit or something like that. But what the command/file/script/whatever does is tells you what connect speed it's connecting to the hub to.
... (4 Replies)
Discussion started by: merlin
4 Replies
9. UNIX for Dummies Questions & Answers
We are using ZIX 4.3.3 and we need to configure the NIC for ful duplexing and we also need to configure it for a TCP/IP default gateway and DNS server to acccess the Interent.
Can you please tell me the commands and procedures for configuring this?
Thanks
Marc (2 Replies)
Discussion started by: marc3483
2 Replies
10. IP Networking
We run Compaq UNIX Tru64 5.1.
After a switch got replaced our ethernet-card was magically set to
half duplex!
We saw, that the card was set to Autonegotiate:
vmunix: ee1: Autonegotiated, 100 Mbps full duplex
So we set the card with ifconfig to 100 Mbps full duplex with the
following... (3 Replies)
Discussion started by: arn_ch
3 Replies
LEARN ABOUT REDHAT
pcnet_cs
PCNET_CS(4) Kernel Interfaces Manual PCNET_CS(4)
NAME
pcnet_cs - generic NS8390-based PCMCIA Ethernet Driver
SYNOPSIS
insmod pcnet_cs.o [pc_debug=n] [irq_list=i,j,...] [if_port=n] [full_duplex=n] [use_big_buf=n] [use_shmem=n] [mem_speed=n] [delay_output=n]
[delay_time=n] [hw_addr=n,n,n,n,n,n]
DESCRIPTION
Pcnet_cs is a driver for all NS8390-based PCMCIA ethernet cards. It can use either polled IO or a shared memory window to exchange data
with the card. The driver first tests for a shared memory buffer, falling back on polled IO if the memory test fails. When this driver is
bound to a card, it allocates the next available ethernet device (eth0..eth#). This device name will be reported in the kernel log file,
and passed on to cardmgr(8).
PARAMETERS
pc_debug=n
Selects the PCMCIA debugging level. This parameter is only available if the module is compiled with debugging enabled. A non-zero
value enables debugging.
irq_list=i,j,...
Specifies the set of interrupts that may be allocated by this driver.
if_port=n
Selects the transceiver type, for Socket EA and IBM CCAE cards. 1 is 10baseT (twisted pair), and 2 is 10base2 (BNC, or thin net).
The default is 1 (10baseT).
full_duplex=n
For DL10022 based cards where pcnet_cs can't find the MII interface, this option permits manual control of the duplex setting. 1 is
full duplex, and 0 is half duplex; the default is 0.
use_big_buf=n
For Socket EA cards, a flag indicating if the driver should use the large (64K) packet buffer. The default is 1 (true).
use_shmem=n
Selects shared memory versus polled IO mode for packet transfers. The default is -1, meaning to use the card's CIS information to
decide.
mem_speed=n
Sets the access speed of the shared memory window, in nanoseconds. The default is 0 (i.e., no extra wait states). Values of up to
1000 are legal.
delay_output=n
Specifies that a delay should be inserted after a polled IO block output. This is turned on by default for Accton and Socket EA
cards.
delay_time=n
Specifies the length of the delay_output delay, in microseconds. The default is 4.
hw_addr=n,n,n,n,n,n
For cards whose hardware ethernet addresses can't be identified by the current driver, this is a hack for hardwiring a specific
address. The argument should consist of exactly six byte-sized numbers, separated by commas, with no spaces. Numbers may be in
decimal or hex ('0xNN').
DIAGNOSTICS
pcnet_cs: this is an AX88190 card!
Indicates that this card is based on the Asix AX88190 chipset, which requires the axnet_cs driver.
eth#: interrupt(s) dropped!
Indicates that the driver did not receive an interrupt notification for some reason. The driver will poll the card (with a signifi-
cant performance penalty) if the problem persists. The most likely cause is an interrupt conflict and/or host bridge configuration
problem.
eth#: MII is missing!
Indicates that the driver expects this card to have a ``Media Independent Interface'' for link speed and duplex selection, but could
not find it.
AUTHOR
David Hinds - dahinds@users.sourceforge.net
SEE ALSO
cardmgr(8), pcmcia(5).
pcmcia-cs 2001/11/04 22:57:46 PCNET_CS(4)