8 More Discussions You Might Find Interesting
1. Post Here to Contact Site Administrators and Moderators
Hello MODs/Admins,
Could you please help me here as from last 6 to 7 days I(and checked with my fellow friends too) am not able to access unix.com site at all. It is very very slow, it never loads completely. Even I checked with different people and different computers it results same only,... (8 Replies)
Discussion started by: RavinderSingh13
8 Replies
2. Proxy Server
Dear all experts here,
:)
I would like to install a proxy server on Linux server to perform solely to control the access of Web server.
In this case, some of my vendor asked me to try Squid and I have installed it onto my Linux server.
I would like know how can I set the configuration to... (1 Reply)
Discussion started by: kwliew999
1 Replies
3. IP Networking
Hi all
I need help with a set of iptables rules that would allow a portion of a bank of ipaddresses acces to only one or two named wbsites.
Please advise
Thank You
Ed (3 Replies)
Discussion started by: wa1ed
3 Replies
4. Emergency UNIX and Linux Support
I need a Squid config that allows access to only one domain: .example.com
Traffic should only be allowed through if coming from 10.100.0.0/24
and only port 80 (http) and port 443 (https) traffic should be allowed through, but again, only to this ONE domain.
It Must be Squid (no iptables... (3 Replies)
Discussion started by: glev2005
3 Replies
5. IP Networking
Hello,
I have a pretty useless satellite link at home (far from any civilization), so I wanted to set up caching in order to speed things up. My Squid 2.6 runs "3128 transparent" and is set up quite well on a separate machine.
I also have my dd-wrt router to move all port 80 traffic through... (0 Replies)
Discussion started by: theWojtek
0 Replies
6. Emergency UNIX and Linux Support
Hi all
We have squid-2.5.STABLE11-3.FC4 running in our environment.
LDAP authentication works fine. Active Directory 2003 Users are prompted to enter credentials every time they access the net. The system works perfectly, but I need to configure Squid to block users in a specific AD group.... (1 Reply)
Discussion started by: wbdevilliers
1 Replies
7. UNIX and Linux Applications
Hi ,
I am new user.
As you know when acl is defined in /etc/squid/squid.conf file according to its http_access users are able to access internet.
Before that .htaccess asks them to access internet.
It is fine.
I saw in some customised linux servers in place of .htaccess login ,html web page... (1 Reply)
Discussion started by: sandeepvson
1 Replies
8. IP Networking
Setup a site to site VPN between two cisco routers.
One of the site locations is unable to access ports such as https://example.com:9001
How do I let them go into port 9001?
They can ssh, ftp, telnet and everything else.
Is this a VPN issue or ACL access issue?
I put
permit ip host... (0 Replies)
Discussion started by: photon
0 Replies
vxsited(1M) vxsited(1M)
NAME
vxsited - site monitoring daemon
SYNOPSIS
/etc/vx/bin/vxsited [mail_address...]
DESCRIPTION
The vxsited daemon monitors Veritas Volume Manager (VxVM) for disks being attached, and reattaches a detached site if the disks that belong
to that site become accessible.
vxsited analyzes the output of the vxnotify command, and waits for a failed disk to attach. When a disk is attached, vxsited attempts to
online the disk, and tries to reattach the failed site. If a site is successfully reattached, vxsited starts recovery using vxrecover, and
sends mail to root (by default) or to other specified users.
Mail Notification
By default, vxsited sends mail to root with information about the disk status of any attempts to reattach the site. To send mail to other
users, add the user login name to the line that starts vxsited in the startup script, /etc/init.d/vxvm-recover, and reboot the system. For
example, if the line appears as:
nohup vxsited root &
and you want mail also to be sent to user1 and user2, change the line to read:
nohup vxsited root user1 user2 &
Alternatively, kill the vxsite process, and restart it from the command line with the required mail addresses as arguments.
The mail notification has a format that is similar to the following:
Subject : Volume Manager site reattach on host hostname
Reattached site sitename in disk-group diskgroup
Reattachment Procedure
If a disk from a detached site becomes accessible again, vxsited checks whether the relocation daemon, vxrelocd, is running. If vxrelocd
is running, vxsited attempts to reattach the site. The relocation daemon can then try to relocate the failed subdisks using space on the
available disks in the disk group. If the failed objects are successfully relocated, vxrelocd changes the state of the site to RECOVER,
and starts the recovery of volumes at the site. When all the plexes at a site have been recovered, the plexes are put into the ACTIVE
state, and the state of the site is set to ACTIVE.
If vxrelocd is not running, vxsited only reattaches a site when all the disks from that site become accessible. After successfully reat-
taching a site, vxsited changes the site state to ACTIVE, and initiates recovery using vxrecover. When all the plexes from a site have been
recovered, the plexes are put into the ACTIVE state, and the state of the site is set to ACTIVE.
vxsited does not attempt to reattach a site that has been explicitly detached by an administrator. The state OFFLINE is set for sites that
have been detached by using the following command:
vxdg -g dg_name detachsite sitename
Disabling vxsited
If you do not want a site to be recovered automatically, kill the vxsited daemon, and prevent it from restarting. To kill the daemon, run
the following command from the command line, and locate the process table entry for vxsited:
ps -ef
Execute the command:
kill -9 PID
Substitute the process ID of the vxsited process for PID. To prevent vxsited from being restarted, comment out the line that starts
vxsited in the startup script /sbin/init.d/vxvm-recover.
FILES
/sbin/init.d/vxvm-recover The startup file for vxsited.
SEE ALSO
kill(1), mailx(1), ps(1), vxdg(1M), vxrelocd(1M), vxintro(1M), vxnotify(1M), vxrecover(1M)
VxVM 5.0.31.1 24 Mar 2008 vxsited(1M)