determining ethernet port speed in solaris

8 More Discussions You Might Find Interesting

1. AIX

AIX 4.2 increase ethernet speed

Hello. I have a server RS/6000 with AIX 4.2. The server have a network card with 10/100mbps speed, but for some reason, the ethernet only runs at 10Mbps, it doesn,t matter if I put the net cable on a 100Mbps switch, it keeps running at 10Mbps speed.... I know how to view/change ethernet speed...

2. UNIX for Dummies Questions & Answers

Determining Disk Speed

Hi, I went to a computer store and the salesman sold me a SATA cable and told me that all SATA cables are the same. Another salesman at a different store told me a cable rated for SATA 2, which I bought, MIGHT work as well as one rate for SATA 3 but it is not guaranteed. I decided to run a...

3. UNIX for Advanced & Expert Users

Determine the ethernet (NIC) card speed.

Hi, Does anyone know how can I determine the maximum capable speed on a network interface card for different OS like HP, Sun, AIX and Linux. I am aware of the tool "ethtool" which can be used for Linux. Are there any handly commands or /proc files where I can get this info depending on the OS....

4. Red Hat

Duplicating ethernet speed

Hi guys, Suppose you have a server with two ethernet cards (1GB each) and each cards are connecting to two different switches cisco 3750. My question is: How can I setup my server's network interfaces to increase the throughput up to 2GB? is it possible? If not, do you know another way to up...

5. Solaris

Ethernet Port Name

I have a new Sun 440 and I am trying to configure it. Non of the Ethernet ports are enabled; when I issue "ifconfig -a" it returns nothing. Is there a way to know the available port name (e.g. ce, bge, etc.) by running a command or so ?

6. Solaris

Reg. Ethernet port

Hi Friends, I am using intel system installed solaris 10, when i check ifconfig -a it doesn't show any thing eg-for HP servers hme0, for sun servers-iprb0. for me it doesn't show any thing, and tell me what files to be modified. Thanks in Advance.

7. UNIX for Dummies Questions & Answers

how can i see ethernet card speed in solars

hai this is nagesh when i was doing practical , i find some dought. iam using solaris 9. how can i see the ethernet card speed , wheather it is halfduplex or full duplex.any body please help me

8. AIX

AIX - Determining link speed

I am trying to find a command to return the "link" speed of the networks installed on AIX. ifconfig - gives me where the link is up and the duplex setting. I need to determine for example if the ethernet connection is 10, 100, 1000 Mbs or what the current speed is based on the network media...

LEARN ABOUT REDHAT

xirc2ps_cs

XIRC2PS_CS(4)						     Kernel Interfaces Manual						     XIRC2PS_CS(4)

NAME

       xirc2ps_cs - Xircom CE2ps (and newer) device driver

SYNOPSIS

       insmod xirc2ps_cs.o [pc_debug=n] [full_duplex=n] [irq_list=i,j,...]  [if_port=n] [lockup_hack=n]

DESCRIPTION

       xirc2ps_cs  is  the low-level Card Services driver for the Xircom 16-bit PCMCIA ethernet adapters.  When this driver is attached to a card,
       it allocates the next available ethernet device.

PARAMETERS

       pc_debug=n
	      Selects the PCMCIA debugging level.  This parameter is only available if the module is compiled with debugging enabled.  A  non-zero
	      value enables debugging.

       if_port=n
	      Selects  the transceiver type, for some CE3B-100 cards that lack the ability to autonegotiate.  For such cards, a value of 1 selects
	      10baseT, and 4 selects 100baseT.

       full_duplex=n
	      Selects full duplex mode.  The default is 0 (half duplex).

       irq_list=i,j,...
	      Specifies the set of interrupts that may be allocated by this driver.

       lockup_hack=n
	      Enables a hack to avoid lockups on some cards.	Use this only if you really have lockup problems with your card.

SEE ALSO

       cardmgr(8), pcmcia(5).

BUGS

       Please report to <xircom-bugs@isil.d.shuttle.de>

AUTHOR

       Werner Koch <werner.koch@guug.de>

							     1.5  1998/09/15 12:40:59						     XIRC2PS_CS(4)

UNIX for Advanced & Expert Users