Hi,
See if this helps...
a. On a per job basis, specify the media to print
to either by size or by tray number:
1. By size:
lp -d<queue> -o<paper size>
where <paper size> is one of the following:
legal, letter, A3, A4, A5, A6, exec, ledger,
11x17, B4-JIS, B5-JIS, B5-ISO, B6-JIS, com10,
com10env, PostCard Single, PostCard Double,
custom, C5, C5env,
DL, DLenv, monarch
2. By tray number:
lp -d<queue> -o<tray specification>
where <tray specification> is one of the
following:
tray1, upper, ub, ubin, tray2, lower,
lb, lbin, tray3, tray4
b. To configure a default for all jobs in a
particular queue, run the following commands:
1. cd <model directory>
2. cp <queue> <queue>.tmp
3. sed -e 's/paper="def"/paper="<paper size>"/'
<queue>.tmp > <queue>
NOTE: Above command is all on one line.
4. rm <queue>.tmp
where:
<model directory> is:
/usr/spool/lp/interface/model.orig on HP-UX 9.x
/etc/lp/interface/model.orig on HP-UX 10.x
/etc/lp/interface/model.orig on HP-UX 11.x
/etc/lp/interfaces/model.orig on Solaris
<paper size> is one of the following:
legal, letter, A3, A4, A5, A6, exec, ledger,
11x17, B4-JIS, B5-JIS, B5-ISO, B6-JIS, com10,
com10env, PostCard Single, PostCard Double,
custom, C5, C5env, DL, DLenv, monarch
The above commands will set the default paper
size of the specified queue.
In short, edit /etc/lp/interfaces/model.orig/* and replace `paper="def"'
with `paper="letter"'. (Twiddle paper selection to suit your needs).
In your fav editor, searching for `paper=' drops you on the spot, or you
can sed it out as listed above.
