Bluetooth and GPS: Part 1 - Reading Wireless Serial Port Data

9 More Discussions You Might Find Interesting

1. AIX

Connect GPS to serial port AIX 5.x

HI, Does anyone installed a GPS from his Serial port to an IBM Server serial port with AIX 5.X I would like the rs232 configuration you used on the GPS, and the ttys configuration from your server. Thanks in advance !!!

2. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

3. Debian

Reading data from a serial port

Dear List - I am trying to capture data from a serial port and write it to a file. /var/www$ cat /dev/ttyS0 > scale_value.html cat: /dev/ttyS0: Device or resource busy /var/www# cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:16550A port:000003F8 irq:4 tx:90...

4. Programming

Wrong data with Read from a serial port.

hi, I've a problem on my C/C++ program with Posix Library. I have to read data from the serial but I have incorrect data, in fact I get a bunch of zeros: "2953.3174, 2785.2126, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0 , 0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 ,...

5. Shell Programming and Scripting

reading from and writing to serial port

hello all, please any one can provide me the shell script to write data to /dev/ttyS1 and read responce from /dev/ttyS1 and compare the responce to some string .. thnxx ---------- Post updated at 03:35 PM ---------- Previous update was at 11:46 AM ---------- any body help me.. how do i...

6. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

7. SCO

data transfer from serial port

dear sir, pls. can you help me ? , my os is unix sco 5.0.4 and ,server dat derive (1,4gb) not working, now i want to transfer my server data in other machine (unix/other possible) by serial port/other port comminication. thanks pankaj raval

8. Programming

serial port reading

Hai there, Can any one provide me with a ansi c source code for opening com1 or com2 and read data. The port is connected to another serial communication device on rs232 port. The o/s is Sco Unix 5.0.6 Matter urgent Viswanath

9. Programming

Reading incoming data in serial ports

Hi every body, i have the following problem : I need to read incoming data from a serial port, this port has connected a weigth device to it that send the weigth and i need to read this data to my aplication, i had this problem in Window Enviroment and i resolve with a "C" routine, but in Unix...

LEARN ABOUT DEBIAN

baycom

BAYCOM(9)						      Kernel Reference Guide							 BAYCOM(9)

NAME

       baycom - amateur (AX.25) packet radio network driver for baycom modems

SYNOPSIS

       #include <linux/baycom.h>
       #include <linux/hdlcdrv.h>

DESCRIPTION

       The driver currently supports three different modems: ser12, par96 and par97.

   ser12
       This  is a very simple 1200 baud AFSK modem. The modem consists only of a modulator/demodulator chip, usually a TI TCM3105. The computer is
       responsible for regenerating the receiver bit clock. The modem connects to a serial port, hence the name. Since the serial port is not used
       as  an  async serial port, the kernel driver for serial ports cannot be used, and this driver only supports standard serial hardware (8250,
       16450, 16550).

   par96
       This is a modem for 9600 baud FSK compatible to the G3RUH standard.  The modem does all the filtering and regenerates the  receiver  clock.
       Data  is transferred from and to the PC via a shift register.  The shift register is filled with 16 bits and an interrupt is signalled. The
       PC then empties the shift register in a burst. This modem connects to the parallel port, hence the name.

   par97
       This is a redesign of the par96 modem by Henning Rech, DF9IC. The modem is protocol compatible to par96, but uses only three low power  ICs
       and can therefore be fed from the parallel port and does not require an additional power supply.

IOCTL CALLS

       The ioctl calls follow the implementation in the hdlcdrv.

       BAYCOMCTL_GETMODEMTYPE
	      returns the modem type (i.e. ser12 or par96) and the options in effect (currently only the source of the DCD signal)

       BAYCOMCTL_SETMODEMTYPE
	      sets the modem type and the options. Only superuser can do this.

       BAYCOMCTL_GETDEBUG
	      return some debugging values. Not always available.

SEE ALSO

       baycom (9), soundmodem (9), linux/drivers/net/hdlcdrv.c,

AUTHOR

       baycom was written by Thomas Sailer, HB9JNX/AE4WA, (t.sailer@alumni.ethz.ch).

Linux 2.1.x							  2 October 1996							 BAYCOM(9)

UNIX and Linux RSS News