10 More Discussions You Might Find Interesting
1. Shell Programming and Scripting
I need a scrip that will show me the filesystems that are greater than 70%...but not sure how to filter using the df -h | grep
Thank you for your help!! (6 Replies)
Discussion started by: eponcedeleonc
6 Replies
2. Shell Programming and Scripting
i need to write a shell script for printing the list of filesystems whose disk utilization is more than 75%...i tried using df -h along with awk but cud'nt make the combination work.....:wall:
when we do df -h then the filesystems which are using more than 75% capacity shud be printed according to... (11 Replies)
Discussion started by: xtatic
11 Replies
3. UNIX for Dummies Questions & Answers
hi guys
suse 10.2
today some guys are adding some luns from a SAN so in order to add them I followed this command
echo 1 > /sys/class/fc_host/host1/issue_lip
echo "- - -" > /sys/class/scsi_host/host<number>/scan
nice now
after that I tried to create a folder in /
but it won't let... (2 Replies)
Discussion started by: karlochacon
2 Replies
4. UNIX for Dummies Questions & Answers
how to check the record of previously mounted remote filesystems after the filesystems are unmounted .operating system is solaris 10 (0 Replies)
Discussion started by: ravijanjanam12
0 Replies
5. AIX
hi is that any command to find out which filesystems occupying more process in cpu utilisation (4 Replies)
Discussion started by: senmak
4 Replies
6. AIX
Hi to all
i want to increase the /usr size.
but, it is mirrored on hdisk0 and hdisk1.
i know that chfs will work, but i am not confident about mirroring.
can anyone tell me the procedure.
thanks (2 Replies)
Discussion started by: honeym210
2 Replies
7. UNIX for Advanced & Expert Users
Dear All
We have HP9000 rp7400 Server running with hp-ux 11i.
Our Disk storage has two volume groups and are allocated as follows:
1. /#vgdisplay -v
--- Volume groups ---
VG Name /dev/vg00
VG Write Access read/write
VG Status available... (1 Reply)
Discussion started by: mhbd
1 Replies
8. UNIX for Dummies Questions & Answers
Like the topic says, does anyone know if it is possible to check to see when an FTP only user has logged in? Because the shell is /bin/false and they are only using FTP to access the system doing a "finger" or "last" it says they have never logged in.
Is there a way to see when ftp users log in... (1 Reply)
Discussion started by: LordJezo
1 Replies
9. Shell Programming and Scripting
Hi
How can I only print the file systems that are more than 95% full.
I used the df -k output and tried to check for each file system and then print only the ones that meet the criteria... But my solution seems cloodgie ... (3 Replies)
Discussion started by: YS2002
3 Replies
10. UNIX for Advanced & Expert Users
my partner change the server's ip address and now i can't to mount the oracle's filesystem, what i do? i don't want to reinstall Unix. My unix is SCO UNIX 5.0.5 (9 Replies)
Discussion started by: marun
9 Replies
Sys::Filesystem::Linux(3pm) User Contributed Perl Documentation Sys::Filesystem::Linux(3pm)
NAME
Sys::Filesystem::Linux - Return Linux filesystem information to Sys::Filesystem
SYNOPSIS
See Sys::Filesystem.
INHERITANCE
Sys::Filesystem::Linux
ISA Sys::Filesystem::Unix
ISA UNIVERSAL
METHODS
version ()
Return the version of the (sub)module.
ATTRIBUTES
The following is a list of filesystem properties which may be queried as methods through the parent Sys::Filesystem object.
fs_spec
Dscribes the block special device or remote filesystem to be mounted.
For ordinary mounts it will hold (a link to) a block special device node (as created by mknod(8)) for the device to be
mounted, like /dev/cdromaXX or aXX/dev/sdb7aXX. For NFS mounts one will have <host>:<dir>, e.g., aXXknuth.aeb.nl:/aXX.
For procfs, use aXXprocaXX.
Instead of giving the device explicitly, one may indicate the (ext2 or xfs) filesystem that is to be mounted by its UUID or volume
label (cf. e2label(8) or xfs_admin(8)), writing LABEL=<label> or UUID=<uuid>, e.g., aXXLABEL=BootaXX or
aXXUUID=3e6be9de-8139-11d1-9106-a43f08d823a6aXX. This will make the system more robust: adding or removing a SCSI disk changes the
disk device name but not the filesystem volume label.
fs_file
Describes the mount point for the filesystem. For swap partitions, this field should be specified asaXXnone. If the name of the mount
point contains spaces these can be escaped asaXX 40.
fs_vfstype
Dscribes the type of the filesystem. Linux supports lots of filesystem types, such as adfs, affs, autofs, coda, coherent,
cramfs, devpts, efs, ext2, ext3, hfs, hpfs, iso9660, jfs, minix, msdos, ncpfs, nfs, ntfs, proc, qnx4, reiserfs, romfs, smbfs,
sysv, tmpfs, udf, ufs, umsdos, vfat, xenix, xfs, and possibly others. For more details, see mount(8). For the filesystems
currently supported by the running kernel, see /proc/filesystems. An entry swap denotes a file or partition to be used for swapping,
cf. swapon(8). An entry ignore causes the line to be ignored. This is useful to show disk partitions which are currently unused.
fs_mntops
Describes the mount options associated with the filesystem.
It is formatted as a comma separated list of options. It contains at least the type of mount plus any additional options
appropriate to the filesystem type. For documentation on the available options for non- nfs file systems, see mount(8). For
documentation on all nfs-specific options have a look at nfs(5). Common for all types of file system are the options
aXXaXXnoautoaXXaXX (do not mount when 'mount -a' is given, e.g., at boot time), aXXaXXuseraXXaXX (allow a user to mount), and
aXXaXXowneraXXaXX (allow device owner to mount), and aXXaXX_netdevaXXaXX (device requires network to be available). The
aXXaXXowneraXXaXX and aXXaXX_netdevaXXaXX options are Linux-specific. For more details, see mount(8).
fs_freq
Used for these filesystems by the dump(8) command to determine which filesystems need to be dumped. If the fifth field is not
present, a value of zero is returned and dump will assume that the filesystem does not need to be dumped.
fs_passno
Used by the fsck(8) program to determine the order in which filesystem checks are done at reboot time. The root filesystem should be
specified with a fs_passno of 1, and other filesystems should have a fs_passno of 2. Filesystems within a drive will be checked
sequentially, but filesystems on different drives will be checked at the same time to utilize parallelism available in the
hardware. If the sixth field is not present or zero, a value of zero is returned and fsck will assume that the filesystem does not
need to be checked.
SEE ALSO
Sys::Filesystem, Sys::Filesystem::Unix, fstab(5)
VERSION
$Id: Linux.pm 128 2010-05-12 13:16:44Z trevor $
AUTHOR
Nicola Worthington <nicolaw@cpan.org> - <http://perlgirl.org.uk>
Jens Rehsack <rehsack@cpan.org> - <http://www.rehsack.de/>
COPYRIGHT
Copyright 2004,2005,2006 Nicola Worthington.
Copyright 2009,2010 Jens Rehsack.
This software is licensed under The Apache Software License, Version 2.0.
<http://www.apache.org/licenses/LICENSE-2.0>
perl v5.10.1 2010-05-18 Sys::Filesystem::Linux(3pm)