I have a system running
and I was told by the NetApp Admin that he has provided 5 LUNs of 1Tb, 200Gb and remaining 3 of 300Gb, but I am not able to see the new LUNs.
I have type the following:
them rebooted the system, after run the same command ls, which provided me with same results as above.
them checking on google, I found the following steps:
them:
them:
Have you checked the messages log after issuing lip ?
Messages there should give you some clue what is going on.
There is no need for it btw, this is how you rescan, but lip will also work (this is mostly used when new storage is added to machine)
Where N is the number you know from previous output.
Are you using multipath ?
You should not use those devices directly (/dev/sd....) but their multipath name (/dev/mapper/...) or else you risk if one card dies multipath will not work.
Check out the output of
Locate the disk with 252:2 major/minor number.
Check if that disk is local disk and blacklist that disk so multipath is not active.
Post output of :
Rescan the fabric. You have some cards inside from manufacturer X.
Check out the documentation regarding scanning from Linux host, i cannot say for sure.
Most makers provide some sort of utilities to rescan (scripts etc.).. you will have to figure that one out
---------- Post updated at 17:41 ---------- Previous update was at 17:37 ----------
Sorry i cannot edit posts (issue with browser ), it will just double post.
Read the documentation on provided links.
You will need to configure the multipath.conf, instructions are there (Configuring storage devices).
I am trying to use bash to automate the scan of a specific directory using clamav. Having this in place is a network requirement. The below is an attempt to:
1. count the extensions (.txt, .jpeg) in a directory and write them to a virus-scan.log (section in bold)
2. scan each folder in the... (6 Replies)
Gents,
Please can you help.
I want to create a list which contends the complete patch of the location of some directories with the size of each file.
need to select only .txt file
In this case I am try to find the subdirectories tp1 and tp2 and create the output list.
jd175-1
tp1... (3 Replies)
Hi everyone,
We have the below sun Operating system, Now our storage team have Create a 500GB LUN for this server, How can i scan and mount the shared LUN ? Could anyone help me to resolve this issue.
SunOS my_hostname.com 5.10 Generic_150400-09 sun4v sparc sun4v
Update:
--------
I... (9 Replies)
Hi
Please I dont have a lot of redhat skills, but I need some help on creating a file system.
I need to rescan for this new LUN, so I try to check existing LUNs:
fdisk -l
Disk /dev/sda: 299.4 GB, 299439751168 bytes
255 heads, 63 sectors/track, 36404 cylinders
Units = cylinders of... (8 Replies)
Hi,
Need help ...I want to create multiple directories in different /file systems using for loop..eg.../ORCL_data01/oradata/orcl/ctl.
../ORCL_data01/oradata/orcl/data.
../ORCL_data01/oradata/orcl/redo.
Script :-
=========
for dir in `ls -d... (8 Replies)
In Solaris the administrator has to update /kernel/drv/sd.conf file to tell the sd driver to scan for a broader range of scsi devices.
Can someone please tell me what file needs to be update in Redhat Linux 5 for the same.
Second part of the question is WWN for HBA's can be found (atleast in my... (1 Reply)
I need to read the last line of a log file and save it, sleep for X minutes and read the last line again. If the line is the same, exit 1, otherwise sleep for X minutes until the last line contains 'Status: Process completed'. Can anyone offer advice here? Thanks. (2 Replies)
hi friends how we can create luns in A1OOO storage ..plzhelp its very urgent
when ever i am connect to A1000 raid controller through laptop with console cable with the help of hyperterminal..i isued serial port parameters which i mentioned below..
Set serial port parameters to:
�... (1 Reply)
Hi everyone , i m working on Sun solaris and i have a file "smsapp.cur" which has information like this paragraph given below , there are millions of such paragraphs
From:923212802736
To:923222326807
logMessage: 07-04-08 17:34:29 Getting message topup from code page default in language English... (2 Replies)
What is the correct mkfs syntax to create mirrored disk files systems? I need to make the file system 20gb. For example:
machine# mkfs -F ufs /dev/md/dsk/d40
size not specified
ufs usage: mkfs special size(sectors) \
-m : dump fs cmd line used to make this partition
-V : print this... (4 Replies)