MagicTouch(4) Kernel Interfaces Manual MagicTouch(4)
NAME
magictouch - MagicTouch input driver
SYNOPSIS
Section "InputDevice"
Identifier "idevname"
Driver "MagicTouch"
Option "Device" "devpath"
...
EndSection
DESCRIPTION
MagicTouch is an XFree86 input driver for MagicTouch ProE-X controller...
The MagicTouch driver functions as a pointer input device, and may be used as the X server's core pointer.
SUPPORTED HARDWARE
It currently supports the ProE-X resistive touchscreen serial (rs232) interface and touchscreens made by Keytec, Inc (MagicTouch)
CONFIGURATION DETAILS
Please refer to XF86Config(5) for general configuration details and for options that can be used with all input drivers. This section only
covers configuration details specific to this driver.
The following driver Options are supported:
Option "Device" "devpath"
Specify the device path for the magictouch. Valid devices are:
/dev/ttyS0, /dev/ttyS1, .... This option is mandatory.
It's important to specify the right device Note: com1 -> /dev/ttyS0, com2 -> /dev/ttyS1 ....
Option "ScreenNumber" "screennumber"
sets the screennumber for the magictouch InputDevice.
Default: ScreenNumber: "0"
Option "MinX, MinY" "value"
These are the minimum X and Y values for the magictouch input device.
Note: MinX, MinY must be less than MaxX, MaxY.
Range: "0" - "32767"
Default: MinX: "0" MinY: "0"
Option "MaxX, MaxY" "value"
These are the maximum X and Y values for the magictouch input device.
Note: MaxX, MaxY must be greater than MinX, MinY.
Range: "0" - "32767"
Default: MaxX: "16384" MaxY: "16384"
SEE ALSO
XFree86(1), XF86Config(5), xf86config(1), Xserver(1), X(7).
AUTHORS
Authors include...
XFree86 Version 4.7.0 MagicTouch(4)