enable

enable(1m)																enable(1m)

NAME

       enable - Starts the DTS entity on the local node.

SYNOPSIS

       dtscp enable [set clock boolean]

ARGUMENTS

       Specifies whether the clock is abruptly set or gradually adjusted to the computed time. This argument is optional. Valid values for boolean
       are The clock is gradually adjusted. This is the default condition.  The clock is abruptly set.

DESCRIPTION

       After the DTS entity is created with the dtscp create command, it is still in a non-functioning state. To put it into operation,  you  must
       invoke  dtscp enable, which causes an immediate synchronization to take place.  When the command is executed, the status attribute state is
       set to on.

       In addition, you may use the enable command to activate a DTS entity that has previously been deactivated with the  disable  command.   See
       the disable reference page in this chapter for more information.

   Privilege Required
       You must have write permission on the ACL associated with the DTS entity in order to execute the command.

NOTES

       The DTS entity cannot be enabled until it is created with the create command; the DTS entity must be in the off state.

       This command is replaced at Revision 1.1 by the dcecp command and may not be provided in future releases of DCE.

EXAMPLES

       The  following  example shows how to enable the entity and adjust the clock gradually to the computed time following the first synchroniza-
       tion: dtscp> enable The following example shows how to enable the entity and abruptly set the clock to  the  computed  time  following  the
       first synchronization: dtscp> enable set clock true

RELATED INFORMATION

       Commands: create(1m), disable(1m)

																	enable(1m)