create(1m) [hpux man page]

create(1m)																create(1m)

NAME

       create - Creates the DCE DTS entity on the specified node

SYNOPSIS

       dtscp create type type

OPTIONS

       Specifies the type of DCE DTS entity to be created on the specified node. Specify one of the following for type: The DCE DTS entity is cre-
       ated as a clerk. (The default setting is clerk.)  The DCE Distributed Time Service entity is created as a server.

DESCRIPTION

       The create command creates a time server or time clerk entity on the system where the command is entered.

       After the DTS entity is created, it is still in a non-functioning state. To put it into operation, you  must  invoke  dtscp  enable,  which
       causes an immediate synchronization to take place. For more information, see the enable reference page in this chapter.

   Privilege Required
       You must have write permission on the ACL associated with the DTS entity in order to execute the command.

NOTE

       This command is replaced at Revision 1.1 by the dcecp command and may not be provided in future releases of DCE.

EXAMPLE

       dtscp> create type server

																	create(1m)

synchronize(1m) 														   synchronize(1m)

NAME

       synchronize - Causes the DTS entity to synchronize the clock on the system where the command is entered.

SYNOPSIS

       dtscp synchronize [set clock boolean]

ARGUMENTS

       Specifies  whether  the	clock is abruptly set or gradually adjusted to the computed time. This argument is optional.  The following values
       are valid: The clock is gradually adjusted. This is the default condition.  The clock is abruptly set.

DESCRIPTION

       The synchronize command causes the DTS clerk or server to solicit time intervals from servers, compute the intersection of the time  inter-
       vals,  and adjust the system clock to the midpoint of the computed time interval.  This command overrides the functions of the synchroniza-
       tion hold down characteristic.

   Privilege Required
       You must have write permission on the ACL associated with the DTS entity in order to execute the command.

NOTES

       The synchronize command does not execute if the entity is already synchronizing or is disabled; the entity must be in the on state.

       This command is replaced at Revision 1.1 by the dcecp command and may not be provided in future releases of DCE.

EXAMPLES

       The following example shows how to initiate a synchronization for the entity, followed by a gradual clock  adjustment:  dtscp>  synchronize
       The  following example shows how to initiate a synchronization for the entity, followed by an abrupt reset of the clock: dtscp> synchronize
       set clock true

																   synchronize(1m)