ahci(7D) Devices ahci(7D)
NAME
ahci - Advanced Host Controller Interface SATA controller driver
SYNOPSIS
sata@unit-address
DESCRIPTION
The ahci driver is a SATA framework-compliant HBA driver that supports SATA HBA controllers that are compatible with the Advanced Host Con-
troller Interface 1.0 specification. AHCI is an Intel-developed protocol that describes the register-level interface for host controllers
for serial ATA 1.0a and Serial ATA II. The AHCI 1.0 specification describes the interface between the system software and the host con-
troller hardware.
The ahci driver currently supports the Intel ICH6/7/8/9, VIA vt8251 and JMicron AHCI controllers which are compliant with the Advanced Host
Controller Interface 1.0 specification. Note that while the Intel ICH6/7/8/9, VIA vt8251 and JMicron AHCI controllers support standard
SATA features, the ahci driver currently only supports hard disk, ATAPI SATA DVD, hotplug and NCQ (Native command queuing). Port multiplier
and power management are not yet supported.
CONFIGURATION
The ahci module contains no user configurable parameters.
FILES
/kernel/drv/ahci
32-bit ELF kernel module (x86).
/kernel/drv/amd64/ahci
64-bit ELF kernel module (x86).
ATTRIBUTES
See attributes(5) for descriptions of the following attribute:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |x86 |
+-----------------------------+-----------------------------+
|Availability |SUNWahci |
+-----------------------------+-----------------------------+
SEE ALSO
cfgadm(1M), cfgadm_sata(1M), prtconf(1M), sata(7D)
Advanced Host Controller Interface 1.0
Writing Device Drivers
NOTES
To bind the ahci driver to your controller, choose the [AHCI] BIOS option.
Note that booting is not supported if toggle exists between the [IDE] and [AHCI] BIOS options
SunOS 5.11 22 Jan 2008 ahci(7D)