10 More Discussions You Might Find Interesting
1. UNIX Desktop Questions & Answers
Hi,
It was happened to close my laptop without proper shutdown due to power failure with USB device connected to it. (removed the USB after shut down)
After this incident, I was not able to boot my suse linux OS.
Initial study reveals that the device is not unmounted properly and shows... (2 Replies)
Discussion started by: Prabhu V
2 Replies
2. UNIX for Dummies Questions & Answers
I am a newbie to Suse linux and was trying to configure internet on my 11.4 suse linux system . I followed a post according to which i uninstalled my NetworkManger library . Later i realised that the real reason for wireless not working on my system was that my wireless driver firmware was... (0 Replies)
Discussion started by: ihatetoregister
0 Replies
3. Solaris
Hi all,
Previously I had both opensuse 11.3 and Windows XP SP2 on my PC, there was no problem at all.I was able to access all documents in Windows from opensuse.
Now when I wanted to install solaris 10 on the same machine there were 2 problems ...
1. Windows is not accessible from solaris... (3 Replies)
Discussion started by: M.Choudhury
3 Replies
4. Filesystems, Disks and Memory
I setup a RAID 5 with 5 drives, one failed, hardware failure so I physically removed it from the raid after powering the machine off then powered it back on and my raid was still good but no 5th drive. I built a 5th drive from scratch and added it in the raid thinking the raid would go into... (0 Replies)
Discussion started by: lacakid
0 Replies
5. SuSE
Dear Experts,
i am trying to find whether the given name is file or a directory
dirp = opendir(dirname);
direntp = readdir(dirp);
if(direntp->d_type & DT_DIR)
{
printf("\n is a dirctory");
}
else
{
//dir_or_file = Mtrue;
printf("\n not a directory");
}
it always... (9 Replies)
Discussion started by: vin_pll
9 Replies
6. SuSE
hi Guys,,
Am very new to Linux OS.. This is my first experience with Linux.
I have installed linux suse 10 in my laptop.it was working fine.. suddenly after 3 days,(i was changing some options of the already installed linux) when i login, i am getting only command interface and GUI is not... (2 Replies)
Discussion started by: mac4rfree
2 Replies
7. Filesystems, Disks and Memory
Hi all!
Working on Oracle v8.1.7.0.0 with OS as Suse v8.0 Linux.
I had created LVM,linked raw devices to LVM as below:
# for binding raw devices
raw /dev/raw/raw1 /dev/oracle/sam_raw_system_251m
raw /dev/raw/raw2 /dev/oracle/sam_raw_users_26m
raw /dev/raw/raw3... (2 Replies)
Discussion started by: Amitstora
2 Replies
8. SuSE
I setup SUSE Linux 10.
I downloaded from SUSE website. A DVD version.
But I have a problem:
Please click to see the screen shots
Shot 1: (Problem is here, with Software)
http://www.vernoos.net/shot-1.jpg
Shot 2:
http://www.vernoos.net/shot-2.jpg
Shot 3:... (1 Reply)
Discussion started by: HASSELBLAD
1 Replies
9. UNIX for Dummies Questions & Answers
i got a NV11 geForce2 100/200 and suse 9.0 pro boot the kernal but then the screen
goes blank and nothing else can't install suse 9.0 pro and grabs for this problem
x will not come up at all
just the boot screen with rez and so on but once i tell it to install thats i have a nec multisync... (6 Replies)
Discussion started by: 3bumbs plumming
6 Replies
10. UNIX for Dummies Questions & Answers
i have just installed suse 8.1 on a third computer which has an Asus p4s8x with onboard NIC and sound. now, on install suse detected everything automatically with no probelm, however upon reboot the sound failed to load as well as the network card. /dev/eth* doesnt exist. i looked in the bios and... (2 Replies)
Discussion started by: norsk hedensk
2 Replies
FSG(1) FSG FSG(1)
NAME
FSG - manual page for FSG lsb_release v2.0-SuSE
SYNOPSIS
lsb_release [OPTION]...
DESCRIPTION
FSG lsb_release v2.0-SuSE prints certain LSB (Linux Standard Base) and Distribution information.
With no OPTION specified defaults to -v.
OPTIONS
-v, --version
Display the version of the LSB specification against which the distribution is compliant.
-i, --id
Display the string id of the distributor.
-d, --description
Display the single line text description of the distribution.
-r, --release
Display the release number of the distribution.
-c, --codename
Display the codename according to the distribution release.
-a, --all
Display all of the above information.
-s, --short
Use short output format for information requested by other options (or version if none).
-h, --help
Display this message.
FILES
If the installation is LSB compliant, the "/etc/lsb-release" file should contain the LSB_VERSION field. The value of the field should be a
colon separated list of supported module versions indicating the LSB specification modules to which the installation is compliant. If the
installation is not compliant, the above field should not be present.
Optional fields are DISTRIB_ID, DISTRIB_RELEASE, DISTRIB_CODENAME, DISTRIB_DESCRIPTION and can be used to override information which is
parsed from the "/etc/distrib-release" file.
If the "/etc/lsb-release.d" directory exists, it is searched for filenames which are taken as additional module-version strings to add to
LSB_VERSION.
The "/etc/distrib-release" file contains a description line which is parsed to get information (especially on currently non-LSB compliant
systems).
The required line style is:
"Distributor release x.x (Codename)"
Where Distributor can be a couple of words, but then concatenated (i.e. Linux Foo BarLinux Linux -> FooBarLinux),
x.x starts with a digit followed by any non-blank characters, Codename will also be concatenated (blanks cleanup only).
release may not be used as a keyword in DISTRIB_DESCRIPTION if you don't want to override "/etc/distrib-release" data.
Notice: To support the Debian distributions' lack of information (see "/etc/debian_version" file) some have been directly added into the
lsb_release script.
EXAMPLES
If the "/etc/lsb-release" file contains:
LSB_VERSION="core-2.0-ia64:core-2.0-noarch"
DISTRIB_DESCRIPTION="I enjoy using my distrib"
and the "/etc/lsb-release.d" directory contains:
graphics-2.0-ia64 graphics-2.0-noarch
and the "/etc/foobar-release" file contains:
My Linux Distrib release 1.0RC4 (TryIt)
Then the results of various options will be:
$ ./lsb_release --all
LSB Version: core-2.0-ia64:core-2.0-noarch:graphics-2.0-ia64:graphics-2.0-noarch
Distributor ID: MyDistrib
Description: I enjoy using my distrib
Release: 1.0RC4
Codename: TryIt
$ ./lsb_release -a -s
1.0 MyDistrib "I enjoy using my distrib" 1.0RC4 TryIt
If the "/etc/lsb-release" file is absent (indicating this is not an LSB compliant distribution), the result will be:
$ ./lsb_release -a
LSB Version: n/a
Distributor ID: MyDistrib
Description: My Linux Distrib release 1.0RC4 (TryIt)
Release: 1.0RC4
Codename: TryIt
REPORTING BUGS
Report bugs at http://bugs.linuxbase.org. Please include a complete, self contained example that will allow the bug to be reproduced, and
say which version of lsb_release you are using.
COPYRIGHT
Copyright (C) 2000, 2002, 2004 Free Standards Group, Inc.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICU-
LAR PURPOSE.
Originally written by Dominique MASSONIE.
FSG lsb_release v2.0-SuSE July 2010 FSG(1)
