9 More Discussions You Might Find Interesting
1. Linux
Hi
I need to identify a newly attached LUN from NetApp on a linuxserver running uname -o
GNU/Linux
I have first run the df -h and got the following:
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_outsystemdb-lv_root
50G 2.7G 45G ... (3 Replies)
Discussion started by: fretagi
3 Replies
2. Solaris
Hi
I have NetApp lun, that was mounted on server as a file system that failed, and that server is no longer in use, but I would like to use that file system on another server. The NetApp Admin, told me he can present that lun to my other system, but my problem is how to mount it? Because that... (8 Replies)
Discussion started by: fretagi
8 Replies
3. Solaris
So,
We have a Netapp storage solution. We have Sparc T4-4s running with LDOMS and client zones in the LDOMS, We are using FC for storage comms. So here's the basic setup
FC luns are exported to the primary on the Sparc box. using LDM they are then exported to the LDOM using vdisk. at the... (4 Replies)
Discussion started by: os2mac
4 Replies
4. AIX
Hi,
I have aix 6.1 box. I want to configure iscsi luns from netapp storage. I tried in google but not getting proper solution for that. i m not getting the proper iqn name.
Please share me the steps to complete this requirements.
Thanks in advance. (1 Reply)
Discussion started by: sunnybee
1 Replies
5. UNIX for Advanced & Expert Users
I have seen a few threads / posts on the forum's but nothing specific to what Iam after. So Iam hoping you can help.
Issue : Iam hoping to remove unused emc luns from my solaris servers , T2000 (5.10 Generic_142900-02). I have a list of the process I have followed for the removal of the luns.... (3 Replies)
Discussion started by: furby
3 Replies
6. Solaris
Hi all
We have a couple of solaris zones running a jboss app in a cluster. Each zone has a shared netapp volume mounted to /app/xxx with everything under that subdir apart from jboss which is local to each zone in /app/jboss-3.2.5
There is a symlink in /app/xxx/jboss-3.2.5 which points to... (0 Replies)
Discussion started by: skewbie
0 Replies
7. Solaris
Hi,
I'm connecting a Solaris 10 server to a Netapp filer with two single port Emulex (Sun StorageTek PCI-X Enterprise 4GB FC HBA) HBAs. After physically installing both these HBAs what do I ned to do within Solaris 10 to enable them and configure them with persistent bindings.
Do I need... (6 Replies)
Discussion started by: gwhelan
6 Replies
8. Solaris
Hi,
I need to increase a veritas filesystem I have currently mounted on a Solaris 10 server. We can resize the LUN on the NetApp filer no problem. What I need to know is what do I do next on the Solaris 10 server I have so that it will see the increase in size. Do I run 'devfsadm' to... (3 Replies)
Discussion started by: gwhelan
3 Replies
9. Solaris
I have this problem when i integrate a new san switch in DFM 3.01 R1 :
dfm fcswitch add switchname1
Error: Host switchname2 (11197) already exists.
switchname2 is a similar san switch but in another fabric, switchname2 is already integrated in DFM database.
Bests Regards
Olivier (2 Replies)
Discussion started by: omainfroy
2 Replies
iobind(1M) iobind(1M)
NAME
iobind - bind a driver to a device
SYNOPSIS
instance]
DESCRIPTION
The command may be used to perform online unbinding of a device LUN hardware path from its current driver and binding a new driver to it.
As part of the binding operation, the specified driver will be bound to the LUN hardware path and also to its corresponding legacy hardware
paths.
The hardware path specified as the argument to the option must be of the form 64000/0x/0x. The driver name specified with the option will
be bound to the LUN and legacy hardware paths. The optional option specifies an instance number to be assigned to the device associated
with the hardware path. If this option is not used, the device will be assigned a new instance number in the new driver's class. The
optional forces the binding to occur at the next reboot if it cannot be done online.
The device must not be in use while the unbind operation is performed. The driver must support online unbinding and binding. If either of
these requirements is false and the option is not given, the user will be asked if the binding can take effect at the next reboot. The
user is given the option to proceed or not.
If a driver supports online unbinding and binding, then after completes, a device will have one of the following software states as shown
by the command:
The specified driver was successfully bound to the hardware path.
The specified driver cannot be used to claim the hardware at
the specified hardware path.
The device at the address is responding, but it is in an
error state.
The device at the specified hardware path is no longer responding.
The specified hardware path is locked. Try again later.
The driver failed.
Options
recognizes the following options:
Force the binding even though a driver does not support online unbinding
and binding or the device is in use. In this case, the binding will take effect at the next reboot.
The LUN hardware path of a device
must be of the form 64000/0x/0x.
The instance number to be assigned to the device.
The name of the driver that the LUN and legacy hardware paths are to be bound to.
RETURN VALUE
Exit values are:
Successful completion.
An error condition occurred.
EXAMPLES
Unbind the driver bound to the device at hardware path and bind the device to Use the default instance number of the driver's class.
Unbind the driver bound to the device at hardware path and bind the device to Assign it the instance number
Do a forced binding. If the driver does not support online binding or the device is busy, the binding will be deferred till next reboot.
WARNINGS
The and commands should not be run at the same time because both commands attempt to bind drivers. In particular, there may be a short
window while will leave a hardware path unbound. If runs during that window, it may bind a different driver to that hardware path. If
this happens, must be executed again to bind the desired driver.
may be executed only by the superuser.
SEE ALSO
ioscan(1M), intro(7).
iobind(1M)