Can't see Netapp LUN on Solaris using LPFC after reboot.

9 More Discussions You Might Find Interesting

1. Linux

Identify newly attached LUN from NetApp

Hi I need to identify a newly attached LUN from NetApp on a linuxserver running uname -o GNU/Linux I have first run the df -h and got the following: df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_outsystemdb-lv_root 50G 2.7G 45G ...

2. Solaris

How to mount a NetApp snapshoot to a Solaris server?

Hi I have NetApp lun, that was mounted on server as a file system that failed, and that server is no longer in use, but I would like to use that file system on another server. The NetApp Admin, told me he can present that lun to my other system, but my problem is how to mount it? Because that...

3. Solaris

Restore of Netapp FC lun targets used as the disks for a zpool with exported zfs file systems

So, We have a Netapp storage solution. We have Sparc T4-4s running with LDOMS and client zones in the LDOMS, We are using FC for storage comms. So here's the basic setup FC luns are exported to the primary on the Sparc box. using LDM they are then exported to the LDOM using vdisk. at the...

4. AIX

Netapp iscsi lun

Hi, I have aix 6.1 box. I want to configure iscsi luns from netapp storage. I tried in google but not getting proper solution for that. i m not getting the proper iqn name. Please share me the steps to complete this requirements. Thanks in advance.

5. UNIX for Advanced & Expert Users

Removing EMC LUN from Solaris 10 host without a reboot

I have seen a few threads / posts on the forum's but nothing specific to what Iam after. So Iam hoping you can help. Issue : Iam hoping to remove unused emc luns from my solaris servers , T2000 (5.10 Generic_142900-02). I have a list of the process I have followed for the removal of the luns....

6. Solaris

Solaris 10 / NetApp volumes - Forbidden: You don't have permission to access...

Hi all We have a couple of solaris zones running a jboss app in a cluster. Each zone has a shared netapp volume mounted to /app/xxx with everything under that subdir apart from jboss which is local to each zone in /app/jboss-3.2.5 There is a symlink in /app/xxx/jboss-3.2.5 which points to...

7. Solaris

Connect Solaris 10 to NetApp filer using Emulex single port HBAs.

Hi, I'm connecting a Solaris 10 server to a Netapp filer with two single port Emulex (Sun StorageTek PCI-X Enterprise 4GB FC HBA) HBAs. After physically installing both these HBAs what do I ned to do within Solaris 10 to enable them and configure them with persistent bindings. Do I need...

8. Solaris

Netapp filer LUN Resize. Commands to run on Solaris afterwards.

Hi, I need to increase a veritas filesystem I have currently mounted on a Solaris 10 server. We can resize the LUN on the NetApp filer no problem. What I need to know is what do I do next on the Solaris 10 server I have so that it will see the increase in size. Do I run 'devfsadm' to...

9. Solaris

Use DFM Netapp 3.01 R1 on Solaris 8

I have this problem when i integrate a new san switch in DFM 3.01 R1 : dfm fcswitch add switchname1 Error: Host switchname2 (11197) already exists. switchname2 is a similar san switch but in another fabric, switchname2 is already integrated in DFM database. Bests Regards Olivier

LEARN ABOUT MINIX

reboot

REBOOT(2)							System Calls Manual							 REBOOT(2)

NAME

       reboot - close down the system or reboot

SYNTAX

       #define _MINIX_SOURCE 1

       #include <unistd.h>

       int reboot(int how, ...)

DESCRIPTION

       Reboot() is used to close down the system.  It allows several ways of shutting down depending on how:

       reboot(RBT_HALT)
	    Halt the system and return to the monitor prompt.

       reboot(RBT_REBOOT)
	    Reboot the system by letting the monitor execute the "boot" command.

       reboot(RBT_PANIC)
	    Cause a system panic.  This is not normally done from user mode, but by servers using the sys_abort() kernel call.

       reboot(RBT_MONITOR, code, length)
	    Halt the system and let the monitor execute the given code of the given length.  (code is of type char * and length of type size_t.)

       reboot(RBT_RESET)
	    Reboot the system with a hardware reset.

       Reboot() may only be executed by the super-user.

DIAGNOSTICS

       If the call succeeds, it never returns.	If something went wrong, the return value is -1 and an error is indicated by errno.

SEE ALSO

       shutdown(8), reboot(8), halt(8), sync(1).

NOTES

       Minix  can not return to the monitor if running in real mode, or if started from MS-DOS.  This means that most of the reboot functions will
       change to a reset.

AUTHOR

       Edvard Tuinder (v892231@si.hhs.NL)

																	 REBOOT(2)

Solaris