how to configure my network to use the internet

10 More Discussions You Might Find Interesting

1. Solaris

Configure Solaris zone on new network

Hi, I have a Solaris 10 zone which I need to configure on a new network. I have configured the new IP on the zone itself and I can ping the interface from a node on the same network, but not from another network. Basically I need to know how to route the traffic from the zone to it's...

2. Solaris

Configure network interface for Solaris 10

Hi, I have installed Solaris 10 on VMware7, When i used ifconfig -a to check network interface, it has shown lo0 as loopback interface. Please advise how to configure network interfaces using VMware.

3. Solaris

configure zones to have different network interface and network

i need to configure a zone to use different interface (bge2) than global and have connected to completely different network switch & to use its own defaultrouter and hosts file .. is it possible ..if so ..how ? Thanks

4. Emergency UNIX and Linux Support

Configure Squid to use LDAP group auth to deny internet access

Hi all We have squid-2.5.STABLE11-3.FC4 running in our environment. LDAP authentication works fine. Active Directory 2003 Users are prompted to enter credentials every time they access the net. The system works perfectly, but I need to configure Squid to block users in a specific AD group....

5. Emergency UNIX and Linux Support

Configure SFTP client to use web/internet prox

I am writing a shell script which needs to connect to a remote internet ftp site over sftp. The problem is that the Red Hat Linux system on which the script will be executed resides behind a web/internet proxy. How can the standard sftp client which is bundled with Red Hat Linux distributions be...

6. Solaris

Configure ILOM from network

HI, Is it possible to set up ILOM from the ethernet terminal. I 'm at remote location from server so would like to know if i can configure it remotely I'm able to access my server via ssh terminal.

7. Solaris

how to configure network in solaris 10?

Hi..i have installed solaris 10 on vmware. I m not able connect to internet. pls help in detail. how to solve the problem. During the installation i have put no DHCP. cofigured manually ( Ip 192.168.1.9) default gateway 192.168.1.1 .

8. Red Hat

How to configure internet in Red hat linux

Hi I have installed Red hat linux 4 Enterprise edition But im not able to find the option where i can configure my broad band internet connectivity? Im using a ADSL connection Please help me

9. HP-UX

HP-UX 10.20 Network Configure

Hi I'm new about UNIX, but I've to use a HP9000 with HP-UX 10.20 workstation. I'm trying to configure the network, I've configured the file /etc/rc.conf.d/netconf with my IP address and the right gateway, so the HP9000 is on the net, I've tried a ping. But now I've a problem I can't start hte CDE,...

10. SCO

configure client for internet !

i m using SCO unix openserver 5.0.... on my client machine. i have assign static IP to it and can ping the server. but now i want to connect internet on it through LAN , don't know how to do that?/ like in redhat linux we add dns or gatway entry to the /etc/resolv.conf don't know about SCO unix...

LEARN ABOUT PHP

socket-context-options

SOCKET-CONTEXT-OPTIONS(3)						 1						 SOCKET-CONTEXT-OPTIONS(3)

Socket context options - Socket context option listing

	Socket context options are available for all wrappers that work over sockets, like tcp, http and ftp.

	      o $bindto
		-  Used to specify the IP address (either IPv4 or IPv6) and/or the port number that PHP will use to access the network. The syntax
		is ip:port for IPv4 addresses, and [ip]:port for IPv6 addresses. Setting the IP or the port to 0 will let the system choose the IP
		and/or port.

	      Note

		      As FTP creates two socket connections during normal operation, the port number cannot be specified using this option.

	      o $backlog
		- Used to limit the number of outstanding connections in the socket's listen queue.

	      Note

		      This is only applicable to stream_socket_server(3).

       +--------+-----------------+
       |Version |		  |
       |	|		  |
       |	|   Description   |
       |	|		  |
       +--------+-----------------+
       | 5.3.3	|		  |
       |	|		  |
       |	|  Added backlog. |
       |	|		  |
       | 5.1.0	|		  |
       |	|		  |
       |	|  Added bindto.  |
       |	|		  |
       +--------+-----------------+
       Example #1

	      Basic $bindto usage example

	      <?php
	      // connect to the internet using the '192.168.0.100' IP
	      $opts = array(
		  'socket' => array(
		      'bindto' => '192.168.0.100:0',
		  ),
	      );

	      // connect to the internet using the '192.168.0.100' IP and port '7000'
	      $opts = array(
		  'socket' => array(
		      'bindto' => '192.168.0.100:7000',
		  ),
	      );

	      // connect to the internet using the '2001:db8::1' IPv6 address
	      // and port '7000'
	      $opts = array(
		  'socket' => array(
		      'bindto' => '[2001:db8::1]:7000',
		  ),
	      );

	      // connect to the internet using port '7000'
	      $opts = array(
		  'socket' => array(
		      'bindto' => '0:7000',
		  ),
	      );

	      // create the context...
	      $context = stream_context_create($opts);

	      // ...and use it to fetch the data
	      echo file_get_contents('http://www.example.com', false, $context);

	      ?>

PHP Documentation Group 												 SOCKET-CONTEXT-OPTIONS(3)

Solaris