Login or Register to Ask a Question and Join Our Community


Solaris

Add gateway

 
Thread Tools Search this Thread
Operating Systems Solaris Add gateway
Prev   Next
# 1  
Old 11-10-2008
Add gateway
Hi Community,

I've a question about network adaptors.

I've installed Solaris 10 configuring the ce0 port with an IP(10.23.8.15) , an interface_name (first) and a gateway(10.23.8.1) .
I need to change the name of the interface ce0 and to configure another interface (ce1) with another IP(10.23.9.16) and ANOTHER gateway (10.23.9.1).

I tought to change hostname.ce0 for ce0 then I tought to use this command to configure another interface (ce1) : ifconfig ce1 10.23.9.16 netmask 255.255.255.0 broadcast 10.23.9.255 up.
And then using the following command to add another gateway:

route add -net 255.255.255.0 netmask 255.255.255.0 gw 10.23.9.1 dev ce1

and then modifying hostname.ce1.

Is it All? Or are there other things to do?


Thank you very much and I apologize for my English.
 
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. UNIX for Beginners Questions & Answers

Inconsistency between RedHat 6.5 global gateway and single gateway leads to loss of default gateway

Dear friends I use RedHat 6.5, which sets the gateway in the configuration file / etc / sysconfig / network as GATEWAY = 192.168.1.26, and the gateway in the configuration file / etc / sysconfig / network-scripts / ifcfg-eth11 as GATEWAY = 192.168.1.256. The two gateways are different.... (6 Replies)
Discussion started by: tanpeng
6 Replies

2. Linux

Unable to add route with a specific gateway IP

Hi, This is the routing table on a RHEL 7 server : # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.132.81.145 0.0.0.0 UG 100 0 0 eno49 10.132.81.144 0.0.0.0 255.255.255.240 U 100 0 0 eno49... (4 Replies)
Discussion started by: anaigini45
4 Replies

3. Solaris

Cannot add gateway

Hi, OS: Solaris 11.2 64bit IP address: 172.16.10.10 Netmask: 255.255.254.0 Gateway: 172.16.2.254 From windows box, i can set and ping gateway. IP address is same segment with windows box. But on solaris i cannot set gateway. route add default 172.16.2.254 add net default: gateway... (6 Replies)
Discussion started by: mzainal
6 Replies

4. Solaris

how to add a default gateway in a zone of different VLAN of global zone

Hi Greetings... I have an issue in connecting the zone from outside the network and it is because of default gateway. I can ping default gateway from inside the zone and not able to ping from global zone due to different VLAN issue. If i add two different gateways and restart network services,... (2 Replies)
Discussion started by: vvpotugunta
2 Replies

5. Linux

GNUGK-How to setup static gateway to gateway routing

Dear Sir I am a newbie in the world of IP telephony. I have been working with Asterisk PBX (SIP) and Cisco Call Manager (MGCP) but now I am learning on how to work GNUGK for H.323 Gatekeeper. I am having a problem, configuring static call routing on GNUGK in the section ... (0 Replies)
Discussion started by: mfondoum
0 Replies

6. UNIX for Dummies Questions & Answers

/etc/rc.d/netif wont add default gateway

hi! whenever i run /etc/rc.d/netif it will read rc.conf and add the pc IP and netmask but it wont read the default gateway resulting lost connectivity to internet my rc.conf: when i issue /etc/rc.d/netif restart: the result of running netif to routing tables: # netstat -rn i... (3 Replies)
Discussion started by: rdns
3 Replies

7. HP-UX

How to add another default gateway

I am using HP-UX 11i and I need to add another default gateway. how can I do that ? (3 Replies)
Discussion started by: salhoub
3 Replies

8. UNIX for Dummies Questions & Answers

How to add 2 gateway routes?

I need some help adding routes in sco. I am using SCO Openserver 5.0.4. Basically I have 2 gateways here. The first is 10.15.1.1 and allows me access to the rest of the computers in the office and in other offices. The other gateway is 10.15.10.2 and is the sonicwall that will allow access... (3 Replies)
Discussion started by: cstovall
3 Replies

9. UNIX for Dummies Questions & Answers

Aix Add Gateway

I have a AIX lates OS. I;m trying to setup a remote office using a telnet section and for some reazon it wont let me login in to the server. I've done this type of configuration on a SCO 5.0.6 . In SCO there is a file call S99route and that is where you put the gateway and it works just... (3 Replies)
Discussion started by: josramon
3 Replies

10. UNIX for Dummies Questions & Answers

Add route gateway -> Restart !! Lose it

:confused: Hi: I donīt know how to add route gateway and when restart the machine lose this route and put other. In SCO ver 5.6 Enterprise write: etc\route delete gateway route add gateway 199.199.1.1. so , netstat -rn to see if has change -> all ok Restart -> !!!... (2 Replies)
Discussion started by: AlvaroD
2 Replies
Login or Register to Ask a Question

LEARN ABOUT OSF1

routes

routes(4)						     Kernel Interfaces Manual							 routes(4)

NAME

       routes - Specifies Internet routing information to the routing tables

SYNOPSIS

       /etc/routes

DESCRIPTION

       Static  routes  can  be defined in the /etc/routes file.  The /etc/routes file identifies static routes that are automatically added to the
       network routing tables with the /usr/sbin/route add command.  The /sbin/init.d/route script contains the /usr/sbin/route add  command  that
       is executed for each entry in the /etc/routes file when the network is restarted on the system or the system is rebooted.

       The general format of an entry in the /etc/routes file is: Dest Name1 Name2

       The  following is a brief description of each element in an /etc/routes file entry: A keyword that indicates whether the route is to a net-
       work or to a host. The two possible keywords are -net and -host.  The name or address of the destination network or  host.   Name1  can	be
       either  a  symbolic  name (as used in the /etc/hosts or /etc/networks file) or an Internet address specified in dotted-decimal format.  The
       name or address of the gateway host to which messages should be forwarded.  Name2 can be either a symbolic name (as used in the	/etc/hosts
       file) or an Internet address specified in dotted-decimal format.

       The  routes file is a Context-Dependent Symbolic Link (CDSL) and must be maintained as such.  See the System Administration manual for more
       information.

EXAMPLES

       To specify a route to a network through a gateway host with an entry in the /etc/routes file, enter:

       -net net2 host4

	      This example specifies a route to a network, net2, through the gateway host4.  To specify a route to a host through a  gateway  host
	      with an entry in the /etc/routes file, enter:

	      -host host2 host4

	      This  example  specifies	a route to a host, host2, through the gateway host4.  To specify a route to a default gateway host with an
	      entry in the /etc/routes file, enter:

	      default 130.9.0.5

	      This example specifies a route to a default gateway with an Internet address of 130.9.0.5.

FILES

       Contains the /usr/sbin/routed add command.

RELATED INFORMATION

       Commands: route(8)

       Daemons: gated(8), routed(8)

       Files: gated.conf(4)

       Network Administration delim off

																	 routes(4)