Cannot access Sun 10 using Hostname and sun10 cant reach other hostnames
Hi all,
I'm setting up a VM on our ESX server using Sun 10 x86. I've configured the hostname in Sun 10, but no other machine is able to use the hostname to communicate with it (i can however use its IP address)
hostname is set in the /etc/nodename file
my resolv.conf looks like
I have also replaced the default /etc/nsswitch.conf with /etc/nsswitch.dns so it reads
with everything else followed by files
I know Ive missed something obvious, because I can't access other machines on the network from the Sun 10 machine using their hostnames either... all other machines are running varying versions of windows
thanks, ill work through that and let you know how it goes (though im now randomly getting a 'Failed to Configure IPv4 DHCP interface" error that im gonna have to fix first!)
NB - where ive put xyz.com, nn.yy and all that in my resolv.conf output - they do represent correct values ive made for our network that need to be used, just i didnt want to plaster them all over a public forum
Last edited by isellapples; 09-26-2008 at 07:14 AM..
I started again with a fresh, complete installation, then:
-Replaced nsswitch.conf with nsswitch.dns
-created /etc/nodename file, containing hostname (vbracs-sun10)
-configured resolv.conf using my settings from above (obv with numbers instead of letters)
The contents of /etc/hosts
The output of running "svcs -d dns/server"
Enabled dns using "svcadm enable dns/server" as suggested
The output of running "svcs dns/server"
"pgrep -ld named" gave no output
The output of "tail /var/adm/messages" with several file not found errors...
I've done a search on named.conf all i can find refers to how it is used to configure a DNS server - but as there are already DNS servers configured on our networks (to which I have no access), wouldnt using this cause conflicts? is there not another way? (here's where I say whilst Ive used Linux, I know very little about how Unix works)
What name service are these other machines using ?
If they can't access the Solaris box by its name but can with its IP address, then it is the name service, presumarily DNS, that isn't properly configured.
If your Solaris box cannot access other machines by their name, then your resolv.conf contains incorrect information.
I'm missing why you are trying to install a DNS server on your Solaris machine given it obtains its address by DHCP.
i wasnt trying to install DNS, as - like you say - its illogical. Its just the line vishwana was going down. The resolv.conf is also configured correctly without question (details are taken from a seperate working Sun 10 machine we have, and are the same as every other machine on our network)
However, i have found the problem - basically, i didn't realise that unix doesnt broadcast the hostname to the network, and as a result our DNS servers wont register it so won't allow it access to the dns services (a security feature). So i just need a way to broadcast the hostname to the network or, failing that, convince IT to manually register the system.
Thanks for your help
Last edited by isellapples; 09-29-2008 at 06:50 AM..
Purchased a Sun Surefire V210 Server off eBay. Unable to Access the Terminal Mode via the Terminal MGT. Using Windows 7 home, and downloaded the ConEmu.
The ConEmu brings up a Command line on the PC, and that's it.
Being new to all this, I was expecting a Login prompt to pop up. Read the... (22 Replies)
Hello everyone,
I'm new with Sun Cluster.
Can you please explain me what do we mean by ressource group, ressource and logical hostname ressource ?
I searched on internet but it's still not clear to me.
Thank you very much.
Regards, (0 Replies)
hi....
i have sun solaris 10 server, fedora 10, and Windows Server.. i cant ping my sun solaris 10, fedora 10 and Windows Server using hostname (etc: ping winserver.bengkel2.com), but i can ping all using IPV4 and IPV6 address.. can u give some suggestion to solve my problem or some idea to... (3 Replies)
Hi All,
So we added a new HP-UX 11.31 machine. Copied OS via Ignite-UX (DVD)over from this machine called machine_a. It was supposed to be named machine_c. And it is when you log in...however when I'm in the ILO console before logging in, it says:
It should say:
What gives? And how do... (4 Replies)
People how do i change the ip and the hostname in a sun cobalt unix.
I don`t know how to see the version. of the sun cobalt
Thank you
---------- Post updated at 08:24 AM ---------- Previous update was at 08:15 AM ----------
Cobalt Linux release 6.0 (Shinkansen-Decaf)
Kernel... (1 Reply)
Hello Folks,
I am having trouble to login to rsc or serial console of V890.
The rsc2.2.3 has been configured with required parameters, resetrs and even rebooted. When serial port is connected to laptop, The hyper terminal does not get the console or POSt messages when the server is rebooting... (8 Replies)
Hi all,
I need to be able to connect to the web server enabled on my solaris box by hostname e.g. http://<hostname_of_solaris_box>. How can I achieve this?
I am able to access the web server via the IP of the solaris box but not the hostname. Any help or pointers would be appreciated.
... (1 Reply)
Hello,
I am new to Solaris.
I am using stand alone Solaris 10.0 for test/study purpose and connecting to internet via an ADSL modem which has DHCP server. My Solaris is working on VMWare within winXP. My WinXP and Solaris connects to internet by the same ADSL modem via its DHCP at the same... (1 Reply)
Currently have root access to our own boxes on site. HQ wants to take root access away from us.
What does root access provide that is unavailable for users as it is essential for us to keep local control.
We log in as users but have su for special needs.
On all other os boxes we have admin... (2 Replies)