backup through tar command on remote tape

10 More Discussions You Might Find Interesting

1. AIX

Backup to a remote tape device. Is it possible?

Hi all The situation is as follows: We need to take an mksysb image from an AIX 6.1 server. From some reason (irrelevant to this discussion) this server does not have access to a local CD-ROM or a tape drive. We do have another server with AIX 6.1 (but different technology level) which got access...

2. UNIX for Dummies Questions & Answers

Remote Tape Backup Using cpio

Hi all, I've got two HP machines running HP-UX 11.31 and would like to remotely backup one server onto another server's tape unit using the cpio command. The two servers use a secured communication channel, i.e ssh. Kindly help, Koketso

3. Solaris

Backup to remote tape drive

Hello all, I'm trying to backup some files on a solaris 10 machine to the remote tape drive connected to another solaris 10 machine. I have set up rsh to allow for password-less connection between the servers, but I'm not able to write to the tape with the command: root@sdp4a>tar cvf...

4. Solaris

tar on remote tape drive

hello guys, am trying to save a file file1 to a remote tape drive using tar and i get a permission denied error as shown below: server1%tar cvf - file1 | rsh server2 dd of=/dev/rmt/1m conv=sync a file1 1883905K permission denied since server2 requires login username and password, i see in...

5. Solaris

Backup over network to remote tape drive

I am currently using tar to backup a server that has 9gb of data. This is fine and works fine, as part of this I send the backup to a remote tape on a remote server using rsh.. This is not very secure though is it? Whats the best idea here - is there another way I should do this to be more...

6. Filesystems, Disks and Memory

dump and tar backup in one tape

Hi all! I'm new in this forum. I need to ask a few question. I would like to know if it is possible to use dump and tar command for backup in one tape. If it is possible, how do I restore it back? Fyi, I'm using the Digital Unix 4.0E OSF/1 box. (old box) :-) Thank you. :)

7. UNIX for Advanced & Expert Users

dump and tar backup in one tape

8. Shell Programming and Scripting

remote tape backup

i have two main servers which are both hpux. the problem is that i only have single dat drive to use with my backup (using tar command). it always takes me alot of time to perform this activity since the backup can only be done one at a time. there are other hpux box with a dat drive attached on...

9. UNIX for Advanced & Expert Users

rsh: remote tape backup

I am trying to perform a remote tape backup from one SCO openserver to another remote SCO Openserver which happens to have a tape drive configured. I have added entries into host.equiv and .rhosts on the tape drive server: prodution_server root # This is equivalent to the hostname and...

10. UNIX for Advanced & Expert Users

tar to remote tape

I tried to buckup some oracle archive logs (from a solaris machine) to a remote tape (in a HP-UX machine). I added the solaris machine name and user to .rhosts, and i tried to use this commande : tar cvf HPhost:/dev/rmt/0mn /u01/* The probleme that it gives: HPhost:/dev/rmt/0mn : No such...

LEARN ABOUT DEBIAN

read_tape

READ_TAPE(8)						       AFS Command Reference						      READ_TAPE(8)

NAME

       read_tape - Reads volume dumps from a backup tape to a file

SYNOPSIS

       read_tape -tape <tape device>
	  -restore <# of volumes to restore>
	  -skip <# of volumes to skip>
	  -file <filename> [-scan] [-noask] [-label]
	  [-vheaders] [-verbose] [-help]

DESCRIPTION

       read_tape reads an OpenAFS backup tape and prompts for each dump file to save.  This command does not require any OpenAFS infrastructure.
       This command does not need an OpenAFS client or server to be available, which is not the case with the backup(8) command.

       The dump files will be named for the Read/Write name of the volume restored.  After saving each dump file, vos restore or restorevol can be
       used to restore the volume into AFS and non-AFS space respectively.

       read_tape reads the tape while skipping the specified number of volumes.  After that, it restores the specified number of volumes.
       read_tape doesn't rewind the tape so that it may be used multiple times in succession.

OPTIONS

       -tape <tape device>
	   Specifies the tape device from which to restore.

       -restore <# of volumes to restore>
	   Specifies the number of volumes to restore from tape.

       -skip <# of volumes to skip>
	   Specifies the number of volumes to skip before starting the restore.

       -file <filename>
	   Specifies an alternate name for the restored volume dump file rather than the default of the volume name.

       -scan
	   Scans the tape.

       -noask
	   Doesn't prompt for each volume.

       -label
	   Displays the full dump label.

       -vheaders
	   Displays the full volume headers.

       -verbose
	   Produces on the standard output stream a detailed trace of the command's execution.	If this argument is omitted, only warnings and
	   error messages appear.

       -help
	   Prints the online help for this command. All other valid options are ignored.

EXAMPLES

       The following command will read the third through fifth volumes from the tape device /dev/tape without prompting:

	  % read_tape -tape /dev/tape -skip 2 -restore 3 -noask

PRIVILEGE REQUIRED

       The issuer must have access to read and write to the specified tape device.

SEE ALSO

       backup(8), restorevol(1), vos_restore(1)

COPYRIGHT

       Copyright 2007 Jason Edgecombe <jason@rampaginggeek.com>

       This documentation is covered by the BSD License as written in the doc/LICENSE file. This man page was written by Jason Edgecombe for
       OpenAFS.

OpenAFS 							    2012-03-26							      READ_TAPE(8)

Solaris