Quote:
Not sure this will work for you, but we were told to comment out the /kernel/drv/e1000g.conf lines for ForceSpeedDuplex and AutoNegAdvertised, which worked for us. (Guess you would have to then make sure your network is set to what you were looking for).
thx but didnt work still getting the 100 HDX
@DukeNuke2 according the net-tune script havent found a proper ndd set
for the e1000g interfaces :-\
partially solved the problem by setting the switch-ports to autoneg and the nic settings below
still wont work with switch settings to 100 full duplex fixed
AutoNegAdvertised=8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8;
ForceSpeedDuplex=4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4;