VxVM/Hba cards/Solaris 10 FS issue


 
Thread Tools Search this Thread
Operating Systems Solaris VxVM/Hba cards/Solaris 10 FS issue
# 1  
Old 11-27-2006
VxVM/Hba cards/Solaris 10 FS issue

Hi all,

I have a compatibly issues with a new hardware

My config is the following one :


Solaris 10
V490 Hardware
2 X HBA Qlogic 2310f cards
An HP EVA 5000 for storage ...
Veritas VxVM 4.1 MP1


When I reboot my server, VxVM is trying to mount/use the volume before it's discovered/available with the SAN.

The Temp solution is to mount manually all the volumes with the following command : vxvol -g loc1vg startall & mountall

The other workaround is to reboot my server each time with the command : reboot -- -r

If I reboot my server with Init 6 :


hba1: QLogic Fibre Channel Host Adapter fcode version 2.00.09
hba1: Firmware v3.3.12 (ipx)
QLogic Fibre Channel Driver v4.20 Instance: 2
hba2: QLogic Fibre Channel Host Adapter fcode version 2.00.09
hba2: Firmware v3.3.12 (ipx)
Hostname: svdlux69
NOTICE: VxVM vxdmp V-5-0-34 added disk array DISKS, datype = Disk

cpqccl288: found array controller device at tgt32, lun0
cpqccl288: Vendor/Product ID = COMPAQ HSV110 (C)COMPAQ
cpqccl291: found array controller device at tgt35, lun0
cpqccl291: Vendor/Product ID = COMPAQ HSV110 (C)COMPAQ
cpqccl33: found array controller device at tgt33, lun0
cpqccl33: Vendor/Product ID = COMPAQ HSV110 (C)COMPAQ
cpqccl34: found array controller device at tgt34, lun0
cpqccl34: Vendor/Product ID = COMPAQ HSV110 (C)COMPAQ

NOTICE: VxVM vxdmp V-5-0-148 enabled path 118/0x30 belonging to the dmpnode 282/0x18

NOTICE: VxVM vxdmp V-5-0-148 enabled path 118/0x38 belonging to the dmpnode 282/0x10

Nov 22 09:28:45 spagent[418]: Starting spagent.

checking ufs filesystems

/dev/vx/rdsk/bootdg/opt: is clean.

checking vxfs filesystems

Running parallel replay fsck ...

/dev/vx/rdsk/loc1vg/loc1lv:file system check failure, aborting ...
/dev/vx/rdsk/loc1vg/opttivlv:file system check failure, aborting ...
/dev/vx/rdsk/loc1vg/tivlv:file system check failure, aborting ...
/dev/vx/rdsk/loc1vg/ccmslv:file system check failure, aborting ...
/dev/vx/rdsk/loc1vg/bgslv:file system check failure, aborting ...
/dev/vx/rdsk/loc1vg/toolslv:file system check failure, aborting ...
/dev/vx/rdsk/loc1vg/ecclv:file system check failure, aborting ...
/dev/vx/rdsk/loc1vg/crashlv:file system check failure, aborting ...

The following filesystems could not be repaired :

/dev/vx/rdsk/loc1vg/loc1lv
/dev/vx/rdsk/loc1vg/ccmslv
/dev/vx/rdsk/loc1vg/opttivlv
/dev/vx/rdsk/loc1vg/tivlv
/dev/vx/rdsk/loc1vg/toolslv
/dev/vx/rdsk/loc1vg/bgslv
/dev/vx/rdsk/loc1vg/ecclv
/dev/vx/rdsk/loc1vg/crashlv

fsckall failed with exit code 1.

WARNING - Unable to repair one or more filesystems.
Run fsck manually (fsck filesystem...).

I tried to put Sleep commands on all the scripts files (veritas+ Hp) without success ....

Any ideas ??

Thanks,

Fabien
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Issue with Fiber Channel cards in Solaris

hi everone i am experiencing disconnectivity from storage to My database machines. i have doubt on my FC cards in my sparc T4-2 machines. i want to know how should i check from my solaris that whether the cards are ok or not because once the disks get disconnect from SAN so it come back again but... (5 Replies)
Discussion started by: janakors
5 Replies

2. Red Hat

Command for viewing hba cards on rhel7

hi all, I am trying to view the hba cards on a rhel7 server (storage says they are there, but I am not seeing them. I tried lspci -nn | grep -i hba lspci |grep qla I tried looking in /sys/class/fc_host.. but it is empty. I am not sure if I am looking in the right spot... (0 Replies)
Discussion started by: gartie
0 Replies

3. Solaris

Solaris and vxvm ( really old versions)

This is going to mean nothing to most.... I'm working on a E4500 server running Solaris 2.5.1 and VXVM 2.5.5 :eek: I've replaced the rootmirror and would like to monitor progress of the resync It's only a 2Gb /partition so it shouldn't take too long. In later versions vxtask list ... (5 Replies)
Discussion started by: Martincorneuk
5 Replies

4. BSD

HBA cards on older FreeBSD's

Hi, The title is a bit misleading, but it seems I can't re-edit the title after creating the post - apologies. I have been handed a variety of servers, whereas quite a few of these are older FreeBSD (4.8, thank you legacy). I now have one of these servers which has a HBA card installed, and... (0 Replies)
Discussion started by: brightstorm
0 Replies

5. Solaris

VxVM on Solaris.

Hi, Quick question if anyone knows this. Is there a command I can use in Veritas Volume manager on Solaris that will tell me what the name of the SAN I am connected to? We have a number of SANs so I am unsure which one my servers are connected to. Thanks. (13 Replies)
Discussion started by: gwhelan
13 Replies

6. Solaris

Command to get the details and number of HBA cards

Hiii... Every one.... I want to know the command to get the details and number of HBA cards attached to a server. I know that we can use "powermt display", but nither my cards are connected to the storage nor powerpath is active. I am using SUN server with Solaris -9. Thanks in... (4 Replies)
Discussion started by: Reboot
4 Replies

7. Solaris

How do I know which HBA cards' hardware I have (on Solaris 10) ?

Hi, I'm trying to determine which HBA cards are installed on my Solaris 10 (Sun-Fire-V240) machine. The relevant data I have is below, but from it I cannot ascertain for sure if I have Emulex 10000 or 11000 HBA cards. Can anyone suggest how to determine my HBA hardware ? Thanks, Ron. ... (4 Replies)
Discussion started by: ronbarak
4 Replies

8. UNIX for Advanced & Expert Users

How do I know which HBA cards' hardware I have (on Solaris 10) ?

Hi, I'm trying to determine which HBA cards are installed on my Solaris 10 (Sun-Fire-V240) machine. The relevant data I have is below, but from it I cannot ascertain for sure if I have Emulex 10000 or 11000 HBA cards. Can anyone suggest how to determine my HBA hardware ? Thanks, Ron. ... (3 Replies)
Discussion started by: ronbarak
3 Replies

9. Solaris

Help! Moving HBA cards to different slots

Due to speed mismatch, the server kept crashing. Sun suggests that I need to move the two HBA cards from the 66Mhz to the 33Mhz slots. There are tons of disks that are connected to these HBAs and I have Veritas volume manager. Does anyone have a list of what I need to do prior/after moving to... (3 Replies)
Discussion started by: kiem
3 Replies

10. Solaris

Moving HBA cards to different PCI slots

Has anyone ever relocated an HBA card after already having it configured in another PCI slot? I've found that the HBA instance #'s start incrementing past the previous. It results in me having to have my instance numbers in /kernel/drv/qla2300.conf be 4,5,6,7 instead of 0,1,2,3. Cleanup with... (5 Replies)
Discussion started by: kduffin
5 Replies
Login or Register to Ask a Question