How do I know which HBA cards' hardware I have (on Solaris 10) ?


 
Thread Tools Search this Thread
Operating Systems Solaris How do I know which HBA cards' hardware I have (on Solaris 10) ?
# 1  
Old 03-03-2008
Question How do I know which HBA cards' hardware I have (on Solaris 10) ?

Hi,

I'm trying to determine which HBA cards are installed on my Solaris 10 (Sun-Fire-V240) machine.

The relevant data I have is below, but from it I cannot ascertain for sure if I have Emulex 10000 or 11000 HBA cards.

Can anyone suggest how to determine my HBA hardware ?

Thanks,
Ron.


--------------------------------------------------------------------------------

from /var/adm/messages:

Feb 28 10:25:54 SRV-00-003 reboot: [ID 662345 auth.crit] rebooted by root
Feb 28 10:25:55 SRV-00-003 rpcbind: [ID 564983 daemon.error] rpcbind terminating on signal.
Feb 28 10:25:59 SRV-00-003 scsi: [ID 243001 kern.warning] WARNING: /pci@1e,600000/lpfc@2,1/fp@0,0 (fcp1):
Feb 28 10:25:59 SRV-00-003 FCP: WWN 0x5009066000052573 reset successfully
Feb 28 10:26:00 SRV-00-003 scsi: [ID 243001 kern.warning] WARNING: /pci@1e,600000/lpfc@2/fp@0,0 (fcp0):
Feb 28 10:26:00 SRV-00-003 FCP: WWN 0x5009066000052571 reset successfully
Feb 28 10:26:01 SRV-00-003 scsi: [ID 243001 kern.warning] WARNING: /pci@1e,600000/lpfc@2,1/fp@0,0 (fcp1):
Feb 28 10:26:01 SRV-00-003 FCP: WWN 0x5009066000052573 reset successfully
Feb 28 10:26:02 SRV-00-003 scsi: [ID 243001 kern.warning] WARNING: /pci@1e,600000/lpfc@2/fp@0,0 (fcp0):
Feb 28 10:26:02 SRV-00-003 FCP: WWN 0x5009066000052571 reset successfully
Feb 28 10:26:03 SRV-00-003 scsi: [ID 243001 kern.warning] WARNING: /pci@1e,600000/lpfc@2,1/fp@0,0 (fcp1):
Feb 28 10:26:03 SRV-00-003 FCP: WWN 0x5009066000052573 reset successfully
Feb 28 10:26:04 SRV-00-003 genunix: [ID 672855 kern.notice] syncing file systems...
Feb 28 10:26:04 SRV-00-003 genunix: [ID 904073 kern.notice] done
Feb 28 10:26:04 SRV-00-003 scsi: [ID 243001 kern.warning] WARNING: /pci@1e,600000/lpfc@2/fp@0,0 (fcp0):
Feb 28 10:26:04 SRV-00-003 FCP: WWN 0x5009066000052571 reset successfully
Feb 28 10:26:46 SRV-00-003 genunix: [ID 540533 kern.notice] ^MSunOS Release 5.10 Version Generic_118833-36 64-bit
Feb 28 10:26:46 SRV-00-003 genunix: [ID 172907 kern.notice] Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Feb 28 10:26:46 SRV-00-003 Use is subject to license terms.
Feb 28 10:26:46 SRV-00-003 genunix: [ID 678236 kern.info] Ethernet address = 0:3:ba:8f:57:d9
Feb 28 10:26:46 SRV-00-003 unix: [ID 673563 kern.info] NOTICE: Kernel Cage is ENABLED
Feb 28 10:26:46 SRV-00-003 unix: [ID 389951 kern.info] mem = 2097152K (0x80000000)
Feb 28 10:26:46 SRV-00-003 unix: [ID 930857 kern.info] avail mem = 2074796032
Feb 28 10:26:46 SRV-00-003 rootnex: [ID 466748 kern.info] root nexus = Sun Fire V240
Feb 28 10:26:46 SRV-00-003 rootnex: [ID 349649 kern.info] pseudo0 at root
Feb 28 10:26:46 SRV-00-003 genunix: [ID 936769 kern.info] pseudo0 is /pseudo
Feb 28 10:26:46 SRV-00-003 rootnex: [ID 349649 kern.info] scsi_vhci0 at root
Feb 28 10:26:46 SRV-00-003 genunix: [ID 936769 kern.info] scsi_vhci0 is /scsi_vhci
Feb 28 10:26:46 SRV-00-003 rootnex: [ID 349649 kern.info] pcisch2 at root: SAFARI 0x1c 0x600000
Feb 28 10:26:46 SRV-00-003 genunix: [ID 936769 kern.info] pcisch2 is /pci@1c,600000
Feb 28 10:26:46 SRV-00-003 scsi: [ID 365881 kern.info] /pci@1c,600000/scsi@2 (glm0):
Feb 28 10:26:46 SRV-00-003 glm0 supports power management.
Feb 28 10:26:46 SRV-00-003 scsi: [ID 365881 kern.info] /pci@1c,600000/scsi@2 (glm0):
Feb 28 10:26:46 SRV-00-003 Rev. 0 Symbios 53c1010-33/66 found.
Feb 28 10:26:46 SRV-00-003 pcisch: [ID 370704 kern.info] PCI-device: scsi@2, glm0
Feb 28 10:26:46 SRV-00-003 genunix: [ID 936769 kern.info] glm0 is /pci@1c,600000/scsi@2
Feb 28 10:26:46 SRV-00-003 scsi: [ID 193665 kern.info] sd0 at glm0: target 0 lun 0
Feb 28 10:26:46 SRV-00-003 genunix: [ID 936769 kern.info] sd0 is /pci@1c,600000/scsi@2/sd@0,0
Feb 28 10:26:46 SRV-00-003 swapgeneric: [ID 308332 kern.info] root on /pci@1c,600000/scsi@2/disk@0,0:a fstype ufs
Feb 28 10:26:46 SRV-00-003 scsi: [ID 365881 kern.info] /pci@1c,600000/scsi@2,1 (glm1):
Feb 28 10:26:46 SRV-00-003 glm1 supports power management.
Feb 28 10:26:46 SRV-00-003 scsi: [ID 365881 kern.info] /pci@1c,600000/scsi@2,1 (glm1):
Feb 28 10:26:46 SRV-00-003 Rev. 0 Symbios 53c1010-33/66 found.
Feb 28 10:26:46 SRV-00-003 pcisch: [ID 370704 kern.info] PCI-device: scsi@2,1, glm1
Feb 28 10:26:46 SRV-00-003 genunix: [ID 936769 kern.info] glm1 is /pci@1c,600000/scsi@2,1
Feb 28 10:26:50 SRV-00-003 rootnex: [ID 349649 kern.info] pcisch1 at root: SAFARI 0x1e 0x600000
Feb 28 10:26:50 SRV-00-003 genunix: [ID 936769 kern.info] pcisch1 is /pci@1e,600000
Feb 28 10:26:50 SRV-00-003 vhba: [ID 851251 kern.notice] vhba_filter_redir_set(sd): major=32
Feb 28 10:26:55 SRV-00-003 emlxs: [ID 349649 kern.info] [ B.1213]emlxs0: NOTICE:1502: Firmware Library (LP10000-S: v1.92a1)
Feb 28 10:26:55 SRV-00-003 emlxs: [ID 349649 kern.info] [ B.1213]emlxs0: NOTICE:1502: Firmware Library (LP11000-S: v2.72a2)
Feb 28 10:26:55 SRV-00-003 emlxs: [ID 349649 kern.info] [ B.1213]emlxs0: NOTICE:1502: Firmware Library (LP11002-S: v2.72a2)
Feb 28 10:26:55 SRV-00-003 emlxs: [ID 349649 kern.info] [ B.1213]emlxs0: NOTICE:1502: Firmware Library (LPe11000-S: v2.72a2)
Feb 28 10:26:55 SRV-00-003 emlxs: [ID 349649 kern.info] [ B.1213]emlxs0: NOTICE:1502: Firmware Library (LPe11002-S: v2.72a2)
Feb 28 10:26:55 SRV-00-003 emlxs: [ID 349649 kern.info] [ B.1216]emlxs0: NOTICE: 100: Driver attach. (Emulex-S s10-64 sparc v2.21h (2007.10.22.23.09))
Feb 28 10:26:55 SRV-00-003 emlxs: [ID 349649 kern.info] [ B.1217]emlxs0: NOTICE: 100: Driver attach. (LP10000DC Dev_id:fa00 Sub_id:fa00 Id:18)
Feb 28 10:26:55 SRV-00-003 emlxs: [ID 349649 kern.info] [ B.1221]emlxs0: NOTICE: 100: Driver attach. (Firmware:1.90a4 Boot:5.00a5 Fcode:1.41a4)
Feb 28 10:26:55 SRV-00-003 emlxs: [ID 349649 kern.info] [ B.125A]emlxs0: NOTICE: 100: Driver attach. (SLI:2 MSI:0)
Feb 28 10:26:55 SRV-00-003 emlxs: [ID 349649 kern.info] [ B.1264]emlxs0: NOTICE: 100: Driver attach. (WWPN:10000000C94886F2 WWNN:20000000C94886F2)
Feb 28 10:26:55 SRV-00-003 pcisch: [ID 370704 kern.info] PCI-device: lpfc@2, emlxs0
Feb 28 10:26:55 SRV-00-003 genunix: [ID 936769 kern.info] emlxs0 is /pci@1e,600000/lpfc@2
Feb 28 10:26:59 SRV-00-003 emlxs: [ID 349649 kern.info] [ B.1216]emlxs1: NOTICE: 100: Driver attach. (Emulex-S s10-64 sparc v2.21h (2007.10.22.23.09))
Feb 28 10:26:59 SRV-00-003 emlxs: [ID 349649 kern.info] [ B.1217]emlxs1: NOTICE: 100: Driver attach. (LP10000DC Dev_id:fa00 Sub_id:fa00 Id:18)
Feb 28 10:26:59 SRV-00-003 emlxs: [ID 349649 kern.info] [ B.1221]emlxs1: NOTICE: 100: Driver attach. (Firmware:1.90a4 Boot:5.00a5 Fcode:1.41a4)
Feb 28 10:26:59 SRV-00-003 emlxs: [ID 349649 kern.info] [ B.125A]emlxs1: NOTICE: 100: Driver attach. (SLI:2 MSI:0)
Feb 28 10:26:59 SRV-00-003 emlxs: [ID 349649 kern.info] [ B.1264]emlxs1: NOTICE: 100: Driver attach. (WWPN:10000000C94886F3 WWNN:20000000C94886F3)
Feb 28 10:26:59 SRV-00-003 pcisch: [ID 370704 kern.info] PCI-device: lpfc@2,1, emlxs1
Feb 28 10:26:59 SRV-00-003 genunix: [ID 936769 kern.info] emlxs1 is /pci@1e,600000/lpfc@2,1
Feb 28 10:27:00 SRV-00-003 emlxs: [ID 349649 kern.info] [ B.0493]emlxs0: NOTICE: 720: Link up. (2Gb, fabric)
Feb 28 10:27:00 SRV-00-003 emlxs: [ID 349649 kern.info] [ B.0493]emlxs1: NOTICE: 720: Link up. (2Gb, fabric)
Feb 28 10:27:00 SRV-00-003 rootnex: [ID 349649 kern.info] iscsi0 at root
Feb 28 10:27:00 SRV-00-003 genunix: [ID 936769 kern.info] iscsi0 is /iscsi
Feb 28 10:27:01 SRV-00-003 genunix: [ID 936769 kern.info] fp0 is /pci@1e,600000/lpfc@2/fp@0,0
Feb 28 10:27:01 SRV-00-003 genunix: [ID 830406 kern.warning] WARNING: Page83 data not standards compliant StoreAge Virtual Volume V4R4
Feb 28 10:27:01 SRV-00-003 last message repeated 7 times
Feb 28 10:27:01 SRV-00-003 scsi: [ID 799468 kern.info] ssd285 at fp0: name w5009066000052571,2, bus address 20400
Feb 28 10:27:01 SRV-00-003 genunix: [ID 936769 kern.info] ssd285 is /pci@1e,600000/lpfc@2/fp@0,0/ssd@w5009066000052571,2
Feb 28 10:27:01 SRV-00-003 scsi: [ID 243001 kern.warning] WARNING: /pci@1e,600000/lpfc@2/fp@0,0 (fcp0):
Feb 28 10:27:01 SRV-00-003 FCP: WWN 0x5009066000052571 reset successfully
Feb 28 10:27:01 SRV-00-003 genunix: [ID 936769 kern.info] fp1 is /pci@1e,600000/lpfc@2,1/fp@0,0
Feb 28 10:27:01 SRV-00-003 vhba: [ID 851251 kern.notice] vhba_filter_redir_set(ssd): major=118
Feb 28 10:27:01 SRV-00-003 genunix: [ID 830406 kern.warning] WARNING: Page83 data not standards compliant StoreAge Virtual Volume V4R4
Feb 28 10:27:01 SRV-00-003 last message repeated 7 times

--------------------------------------------------------------------------------

bash-3.00# prtconf -D | egrep -i 'hba|eml|emulex'
lpfc, instance #0 (driver name: emlxs)
lpfc, instance #1 (driver name: emlxs)


--------------------------------------------------------------------------------

bash-3.00# cfgadm
Ap_Id Type Receptacle Occupant Condition
c3 scsi-bus connected configured unknown
c4 scsi-bus connected unconfigured unknown
c6 scsi-bus connected configured unknown
c7 fc-fabric connected configured unknown
c8 fc-fabric connected configured unknown
usb0/1 unknown empty unconfigured ok
usb0/2 unknown empty unconfigured ok

--------------------------------------------------------------------------------

Relevant packages:

PKGINST: SUNWcfcl
NAME: Common Fibre Channel HBA API Library (Usr)
CATEGORY: system
ARCH: sparc
VERSION: 11.10.0,REV=2005.01.04.14.31
BASEDIR: /
VENDOR: Sun Microsystems, Inc.
DESC: Common Fibre Channel HBA API Library based on the T11 FC-MI specification
PSTAMP: bogglidite20060907154329
INSTDATE: Feb 13 2008 11:24
HOTLINE: Please contact your local service provider
STATUS: completely installed
FILES: 11 installed pathnames
6 shared pathnames
6 directories
2 executables
191 blocks used (approx)

PKGINST: SUNWcfclr
NAME: Common Fibre Channel HBA API Library (Root)
CATEGORY: system
ARCH: sparc
VERSION: 11.10.0,REV=2005.01.04.14.31
BASEDIR: /
VENDOR: Sun Microsystems, Inc.
DESC: Common Fibre Channel HBA API Library based on the T11 FC-MI specification
PSTAMP: bogglidite20050921122047
INSTDATE: Feb 13 2008 11:24
HOTLINE: Please contact your local service provider
STATUS: completely installed
FILES: 2 installed pathnames
2 shared pathnames
1 directories
3 blocks used (approx)


PKGINST: SUNWfchba
NAME: Sun Fibre Channel Host Bus Adapter Library
CATEGORY: system
ARCH: sparc
VERSION: 11.10.0,REV=2005.01.04.14.31
BASEDIR: /
VENDOR: Sun Microsystems, Inc.
DESC: SNIA HBA library for Sun Fibre Channel adapters
PSTAMP: bogglidite20060920160453
INSTDATE: Feb 13 2008 11:30
HOTLINE: Please contact your local service provider
STATUS: completely installed
FILES: 7 installed pathnames
3 shared pathnames
3 directories
2 executables
3137 blocks used (approx)

PKGINST: SUNWfchbar
NAME: Sun Fibre Channel Host Bus Adapter Library (root)
CATEGORY: system
ARCH: sparc
VERSION: 11.10.0,REV=2005.01.04.14.31
BASEDIR: /
VENDOR: Sun Microsystems, Inc.
DESC: T11 FC-HBA library for Sun Fibre Channel adapters (root)
PSTAMP: bogglidite20050104161325
INSTDATE: Feb 13 2008 11:30
HOTLINE: Please contact your local service provider
STATUS: completely installed
FILES: 2 installed pathnames
2 shared pathnames
1 directories
3 blocks used (approx)

PKGINST: SUNWfcip
NAME: Sun FCIP IP/ARP over FibreChannel Device Driver
CATEGORY: system
ARCH: sparc
VERSION: 11.10.0,REV=2005.01.04.14.31
BASEDIR: /
VENDOR: Sun Microsystems, Inc.
DESC: Sun FCIP IP/ARP over FibreChannel Device Driver
PSTAMP: bogglidite20070118200200
INSTDATE: Feb 25 2008 11:16
HOTLINE: Please contact your local service provider
STATUS: completely installed
FILES: 5 installed pathnames
3 shared pathnames
3 directories
1 executables
318 blocks used (approx)

PKGINST: SUNWfcmdb
NAME: Fibre Channel adb macros and mdb modules
CATEGORY: system
ARCH: sparc
VERSION: 11.10.0,REV=2005.01.04.14.31
BASEDIR: /
VENDOR: Sun Microsystems, Inc.
DESC: Fibre Channel adb macros and mdb modules
PSTAMP: bogglidite20070118200204
INSTDATE: Feb 25 2008 11:16
HOTLINE: Please contact your local service provider
STATUS: completely installed
FILES: 85 installed pathnames
7 shared pathnames
7 directories
3 executables
253 blocks used (approx)

PKGINST: SUNWfcp
NAME: Sun FCP SCSI Device Driver
CATEGORY: system
ARCH: sparc
VERSION: 11.10.0,REV=2005.01.04.14.31
BASEDIR: /
VENDOR: Sun Microsystems, Inc.
DESC: Sun FCP SCSI Fibre Channel Device Driver
PSTAMP: bogglidite20070118200208
INSTDATE: Feb 25 2008 11:16
HOTLINE: Please contact your local service provider
STATUS: completely installed
FILES: 5 installed pathnames
3 shared pathnames
3 directories
1 executables
540 blocks used (approx)

PKGINST: SUNWfcprt
NAME: Fibre Channel HBA Port utility
CATEGORY: system
ARCH: sparc
VERSION: 11.10.0,REV=2005.08.02.13.23
BASEDIR: /
VENDOR: Sun Microsystems, Inc.
DESC: Utility for Fibre Channel Host Bus Adapters
PSTAMP: bogglidite20060908154901
INSTDATE: Feb 13 2008 11:31
HOTLINE: Please contact your local service provider
STATUS: completely installed
FILES: 3 installed pathnames
2 shared pathnames
2 directories
1 executables
88 blocks used (approx)

PKGINST: SUNWfcsm
NAME: FCSM driver
CATEGORY: system
ARCH: sparc
VERSION: 11.10.0,REV=2005.01.04.14.31
BASEDIR: /
VENDOR: Sun Microsystems, Inc.
DESC: Provides the FCSM driver
PSTAMP: bogglidite20070118200212
INSTDATE: Feb 25 2008 11:16
HOTLINE: Please contact your local service provider
STATUS: completely installed
FILES: 5 installed pathnames
3 shared pathnames
3 directories
1 executables
217 blocks used (approx)

PKGINST: SUNWfctl
NAME: Sun Fibre Channel Transport layer
CATEGORY: system
ARCH: sparc
VERSION: 11.10.0,REV=2005.01.04.14.31
BASEDIR: /
VENDOR: Sun Microsystems, Inc.
DESC: fctl module and fp device driver
PSTAMP: bogglidite20070118200215
INSTDATE: Feb 25 2008 11:16
HOTLINE: Please contact your local service provider
STATUS: completely installed
FILES: 8 installed pathnames
5 shared pathnames
5 directories
2 executables
784 blocks used (approx)

--
Ron Barak, System Development Engineer
LSI Technologies Israel Ltd

Smilie
# 2  
Old 03-03-2008
you could use that command Smilie

Code:
root@backup # fcinfo hba-port
HBA Port WWN: 210000e08b077c45
        OS Device Name: /dev/cfg/c4
        Manufacturer: QLogic Corp.
        Model: 375-3019-xx
        Firmware Version: 2.1.144
        FCode/BIOS Version: ISP2200 Host Adapter Driver: 1.14.10 02/07/05
        Type: L-port
        State: online
        Supported Speeds: 1Gb
        Current Speed: 1Gb
        Node WWN: 200000e08b077c45
root@backup #

regards PRESSY
# 3  
Old 03-03-2008
Bug

Hi Pressy,

Thanks for the excellent answer. It gives me exactly what I need (below).

Auf Wiedersehen,
Ron.
--------------------------------------------------------------------------------



bash-3.00# fcinfo hba-port
HBA Port WWN: 10000000c94886f2
OS Device Name: /dev/cfg/c7
Manufacturer: Emulex
Model: LP10000DC
Firmware Version: 1.90a4
FCode/BIOS Version: 1.41a4
Type: N-port
State: online
Supported Speeds: 1Gb 2Gb
Current Speed: 2Gb
Node WWN: 20000000c94886f2
HBA Port WWN: 10000000c94886f3
OS Device Name: /dev/cfg/c8
Manufacturer: Emulex
Model: LP10000DC
Firmware Version: 1.90a4
FCode/BIOS Version: 1.41a4
Type: N-port
State: online
Supported Speeds: 1Gb 2Gb
Current Speed: 2Gb
Node WWN: 20000000c94886f3


--
Ron Barak, System Development Engineer
LSI Technologies Israel Ltd




Smilie
# 4  
Old 03-19-2008
fcinfo hba-port does not display info if the user is a non-root user.
any alternative for this command to display the same info?

thanks
# 5  
Old 03-19-2008
if you are not root, no.

luxadm and other commands need root also...
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Red Hat

Command for viewing hba cards on rhel7

hi all, I am trying to view the hba cards on a rhel7 server (storage says they are there, but I am not seeing them. I tried lspci -nn | grep -i hba lspci |grep qla I tried looking in /sys/class/fc_host.. but it is empty. I am not sure if I am looking in the right spot... (0 Replies)
Discussion started by: gartie
0 Replies

2. Solaris

Extracting HBA Card Hardware info

Hello, I am very new to solaris so please bear with me. I have 2 machines in question. For both I am trying to get the HBA Card Hardware information such as: HBA Model Name HBA Firmware version HBA Port details HBA Driver details First machine is a Solaris 10. When I execute fcinfo... (6 Replies)
Discussion started by: flagman5
6 Replies

3. BSD

HBA cards on older FreeBSD's

Hi, The title is a bit misleading, but it seems I can't re-edit the title after creating the post - apologies. I have been handed a variety of servers, whereas quite a few of these are older FreeBSD (4.8, thank you legacy). I now have one of these servers which has a HBA card installed, and... (0 Replies)
Discussion started by: brightstorm
0 Replies

4. Solaris

hba speed Solaris 9

Hello, In Solaris 10 I can use fcinfo to find what speed the hba ports are running at, am I able to find this out using Solaris 9? I have tried a few variations on luxadm but cant find anything relevant. Thanks. (1 Reply)
Discussion started by: Actuator
1 Replies

5. Solaris

Command to get the details and number of HBA cards

Hiii... Every one.... I want to know the command to get the details and number of HBA cards attached to a server. I know that we can use "powermt display", but nither my cards are connected to the storage nor powerpath is active. I am using SUN server with Solaris -9. Thanks in... (4 Replies)
Discussion started by: Reboot
4 Replies

6. UNIX for Advanced & Expert Users

How do I know which HBA cards' hardware I have (on Solaris 10) ?

Hi, I'm trying to determine which HBA cards are installed on my Solaris 10 (Sun-Fire-V240) machine. The relevant data I have is below, but from it I cannot ascertain for sure if I have Emulex 10000 or 11000 HBA cards. Can anyone suggest how to determine my HBA hardware ? Thanks, Ron. ... (3 Replies)
Discussion started by: ronbarak
3 Replies

7. UNIX for Advanced & Expert Users

Hardware HBA problem

I have worked with Qlogic (Sun) fiber cards a lot and with Emulex fiber cards only a little. Here is the scenario: I have a Sun 490 with 3 Emulex cards in it. A pair are for the 6120 array that is attached, the other is a direct attach so our SAN for Veritas Netbackup to back up the system.I... (0 Replies)
Discussion started by: lm_admin_dh
0 Replies

8. Solaris

Help! Moving HBA cards to different slots

Due to speed mismatch, the server kept crashing. Sun suggests that I need to move the two HBA cards from the 66Mhz to the 33Mhz slots. There are tons of disks that are connected to these HBAs and I have Veritas volume manager. Does anyone have a list of what I need to do prior/after moving to... (3 Replies)
Discussion started by: kiem
3 Replies

9. Solaris

VxVM/Hba cards/Solaris 10 FS issue

Hi all, I have a compatibly issues with a new hardware My config is the following one : Solaris 10 V490 Hardware 2 X HBA Qlogic 2310f cards An HP EVA 5000 for storage ... Veritas VxVM 4.1 MP1 When I reboot my server, VxVM is trying to mount/use the volume before it's... (0 Replies)
Discussion started by: unclefab
0 Replies

10. Solaris

Moving HBA cards to different PCI slots

Has anyone ever relocated an HBA card after already having it configured in another PCI slot? I've found that the HBA instance #'s start incrementing past the previous. It results in me having to have my instance numbers in /kernel/drv/qla2300.conf be 4,5,6,7 instead of 0,1,2,3. Cleanup with... (5 Replies)
Discussion started by: kduffin
5 Replies
Login or Register to Ask a Question