I have T5220 sparc server and I want to install Solaris 11.3 on that. From notes, I know that 11.4 will not be supported.
It is old server, which had hardware RAID (with SAS card). I removed connection from that card and directly inserted both cables on motherboard because I want to get rid of hardware RAID. Card is still there inside server, but both HDD cables are connected on MB now.
I created bootable USB drive (which worked in earlier installation) and trying to boot server from that USB. It boots well, then wait for long time (at "Preparing image for use") and then come in maintenance mode, instead of booting in installation mode. I tried with - text as well as with no argument, but result is same.
What could be wrong, which I am missing here ?
Thanks
-------------------------
Update - Had to reboot couple of times, and then I was able to boot with USB. Consider this thread as solved.
Thanks
Last edited by solaris_1977; 04-30-2019 at 09:36 AM..
Reason: Issue fixed
These 2 Users Gave Thanks to solaris_1977 For This Post:
Hello All,
I am attempting to boot and install Solaris 11 via live USB on a HP DL580 Gen9 Server.
Unfortunately, when I do this it boots into System Maintenance Mode.
The attachment (Pic1) shows what I am seeing via the console.
The BIOS is in UEFI boot. Does not work on legacy mode as I... (15 Replies)
I installed a command-line system ubuntu 12.04 from usb and that's work.
I don't have a internet connection so what I have to install must come from the alternate usb until I can let work my wireless.
I mount the usb to /media/cdrom but when I do sudo apt-get install xorg , then he ask me for the... (3 Replies)
I wanna install grub on my flash drive for rescue usage.
My computer installs winxp, and I have fedora12 installed in vmware. I did like this:
step1: format the flash drive as FAT in winXP.
step2: in fedora12, mount the flash drive on /media/flash
step3: excute the command: grub-install... (10 Replies)
im using Dell Inspiron with windows 7 as operating system.....in my hard drive there is some 34 gb unpartitioned space and now i want to install fedora 13 into it, after installation it should be dual boot.
problem here is...
i have the fedora 13 image file ie fedora13-i386-DVD.iso file.
... (13 Replies)
Hi Gurus of Unix
Recently I install a OpenSolaris in My HP 530
In this moment want to install a USB-A to Serial Cable. Any guru can send a Link where I can use how reference.
I want to configure a Router and my PC don't have any serial Port.
My LapTOP only has USB ports. In this case I buy a... (2 Replies)
Hi everybody,
I have several computers that are configured to install when I plug them on the network. The hard drive come's empty, but I think they have a parameter in the BIOS that allow the machines to install from the network.
My problem is that in most cases, available bw is weak and... (5 Replies)
Hi All,
When I install SCO 6.0 maintenance package 3 I get some mails:
Message 338:
From root Tue Nov 20 12:39:15 2007
From: Superuser <root@hocopart.hocoparts.local>
X-Mailer: SCO OpenServer 6.0.0 Mail
To: root@hocopart.hocoparts.local
Date: Tue, 20 Nov 2007 12:39:15 +0100 (CET)... (0 Replies)
I'm new in SCO 6. I installed SCO 6 with NIC driver Properly.
But I cann't install and Configure USB Printer In SCO 6.
Any one help me?
email: address deleted by the moderator (0 Replies)