Jumpstart process can�t find tape device

10 More Discussions You Might Find Interesting

1. HP-UX

Failed to open tape device /dev/rmt/0mn:Device busy (errno = 16)

Hi, Unable to make tape backup, please help. /opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00 * Creating local directories for configuration files and archive. ======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery. (Mon...

2. AIX

Backup to a remote tape device. Is it possible?

Hi all The situation is as follows: We need to take an mksysb image from an AIX 6.1 server. From some reason (irrelevant to this discussion) this server does not have access to a local CD-ROM or a tape drive. We do have another server with AIX 6.1 (but different technology level) which got access...

3. AIX

Tape device temporarily unavailable

Hi All, After (by accident) closing a session that ran a restore command I can not access the tape drive anymore. I get the following error: # tctl -f /dev/rmt0 rewind /dev/rmt0: Resource temporarily unavailable But I cannot find any processes associated with the tape device: # ps...

4. SCO

SCO UNIX DAT Tape Device

Looking for specifically naming convention for a tape device for SCO Unix What full system backup command should I use for SCO UNIX

5. AIX

How to find all device on p570 when need do device firmware upgrade?

I need upgrade firmware for the device of p570, when I go to IBM FIX download website, there are a lot of device of p570 listed. How can I know what device I have on my p570?

6. UNIX for Dummies Questions & Answers

How to change tape device name.

I disconected external device which was configured as rmt0. When I connect it again and run cfgmgr device name has changed (internal drive which was rmt1 is now rmt0 and external drive was rmt0 and is rmt1) and I dont know how to back it out. The thing is that for all backups I use new modell...

7. Solaris

flarcreate to remote tape device

Hi, Someone knows hot to create a flash archive to a remote tape device? Here is my try: $flarcreate -n nereus -S -t lisdev:/dev/rmt/1n WARNING: hash generation disabled when using tape (-t) current filter settings Creating the archive... ERROR: Unable to work archive. Regards

8. UNIX for Advanced & Expert Users

tape device

Hi, 1- how can I find my tape device on my server ? 2-I have a backup of a data base distributed on several file system. How using tar -x can I extract from tape to each apropriate file system ? For exemple the data base was on /d1 ; /d2 ; and /d3. Now I cd to which /dn and use tar -xvf /dev/nm0...

9. UNIX for Dummies Questions & Answers

Is it possible to ufsdump to a file instead of a tape device?

Eh... what the title says. :)

10. Programming

tape device

Hi, I have problem detecting my tape drive. In SAM, once I click on the either Automated Backups or Interactive Backup and Recovery icon, the screen will prompt searching for device and ..... nothing appears in the list. In the end, I have the kill the SAM process and reboot the system and...

LEARN ABOUT REDHAT

ammt

AMMT(8) 						      System Manager's Manual							   AMMT(8)

NAME

       ammt - Amanda version of mt

SYNOPSIS

       ammt [ -d ] [ -f|-t device ] command [ count ]

DESCRIPTION

       Ammt  provides just enough of the standard mt command for the needs of Amanda.  This is handy when doing a full restore and the standard mt
       program has not yet been found.

       Ammt also provides access to the Amanda output drivers that support various tape simulations.

       See the amanda(8) man page for more details about Amanda.  See the OUTPUT DRIVERS section of amanda(8) for more information on  the  Amanda
       output drivers.

OPTIONS

       -d     Turn on debugging output.

       -f device
	      Access tape device device.  If not specified, the TAPE environment variable is used.

       -t device
	      Same as -f.

       command count
	      Which command to issue, and an optional count of operations.

COMMANDS

       Each command may be abbreviated to whatever length makes it unique.

       eof|weof count
	      Write count (default: 1) end of file marks (tapemarks).

       fsf count
	      Skip forward count (default: 1) files.

       bsf count
	      Skip backward count (default: 1) files.

       asf count
	      Position to file number count (default: 0) where zero is beginning of tape.  This is the same as a rewind followed by a fsf count.

       rewind Rewind to beginning of tape.

       offline|rewoffl
	      Rewind to beginning of tape and unload the tape from the drive.

       status Report  status information about the drive.  Which data reported, and what it means, depends on the underlying operating system, and
	      may include:

	      ONLINE Indicates the drive is online and ready.

	      OFFLINE
		     Indicates the drive is offline or not ready.

	      BOT    Indicates the drive is at beginning of tape.

	      EOT    Indicates the drive is at end of tape.

	      PROTECTED
		     Indicates the tape is write protected.

	      ds     Device status.

	      er     Error register.

	      fileno Current tape file number.

	      blkno  Current tape block number file.

	      NOTE: many systems only report good data when a tape is in the drive and ready.

AUTHOR

       Marc Mengel <mengel@fnal.gov>
       John R. Jackson <jrj@purdue.edu>

SEE ALSO

       amanda(8)

																	   AMMT(8)

Solaris