Hi,
i installed Solaris 11 in T2000.
I have 2 guest domains, and i want to install Solaris 10 on a guest domain and Solaris 9 on another.
I added a vdsdev with the iso file to primary, and then i added a vdisk to guest domain but it doesnt recognize as boot disk.
I even tried with lofiadm -a /path/to/iso and allocate the output /dev/lofi/1 to guest domain. But it doesnīt work.
Here is my list-bindings output:
Code:
root@todd:/export/home/rhernandez# ldm list-bindings
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- SP 4 1G 0.7% 4d 18h 56m
MAC
00:14:4f:2a:cd:96
HOSTID
0x842acd96
CONTROL
failure-policy=ignore
DEPENDENCY
master=
VCPU
VID PID UTIL STRAND
0 0 0.5% 100%
1 1 0.4% 100%
2 2 0.3% 100%
3 3 0.7% 100%
MAU
ID CPUSET
0 (0, 1, 2, 3)
MEMORY
RA PA SIZE
0x8000000 0x8000000 1G
IO
DEVICE PSEUDONYM OPTIONS
pci@780 bus_a
pci@7c0 bus_b
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
CLIENT PORT
test1@primary-vcc0 5001
test2@primary-vcc0 5000
VSW
NAME MAC NET-DEV DEVICE DEFAULT-VLAN-ID PVID VID MTU MODE
primary-vsw0 00:14:4f:f8:c1:23 e1000g0 switch@0 1 1 1500
PEER MAC PVID VID MTU
vnet1@test1 00:14:4f:f9:83:63 1 1500
vnet2@test2 00:14:4f:f9:a2:32 1 1500
VDS
NAME VOLUME OPTIONS MPGROUP DEVICE
primary-vds0 iso0 /export/home/rhernandez/sol-10-u11-ga-sparc-dvd.iso
vdisk_test1 /var/LDOM/vdisk_test1
vdisk_test2 /var/LDOM/vdisk_test2
iso1 /export/home/rhernandez/sol-9-905hw-ga-sparc-dvd.iso
lofi_sol9 /dev/lofi/3
CLIENT VOLUME
iso0@test1 iso0
vdisk_test1@test1 vdisk_test1
vdisk_test2@test2 vdisk_test2
iso1@test2 iso1
lofi_sol9@test2 lofi_sol9
VCONS
NAME SERVICE PORT
SP
------------------------------------------------------------------------------
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
test1 active -t---- 5001 8 1G 12% 11m
MAC
00:14:4f:fb:84:b1
HOSTID
0x84fb84b1
CONTROL
failure-policy=ignore
DEPENDENCY
master=
VCPU
VID PID UTIL STRAND
0 12 100% 100%
1 13 0.0% 100%
2 14 0.0% 100%
3 15 0.0% 100%
4 16 0.0% 100%
5 17 0.0% 100%
6 18 0.0% 100%
7 19 0.0% 100%
MEMORY
RA PA SIZE
0x8000000 0x88000000 1G
VARIABLES
auto-boot\?=false
NETWORK
NAME SERVICE DEVICE MAC MODE PVID VID MTU
vnet1 primary-vsw0@primary network@0 00:14:4f:f9:83:63 1 1500
PEER MAC MODE PVID VID MTU
primary-vsw0@primary 00:14:4f:f8:c1:23 1 1500
vnet2@test2 00:14:4f:f9:a2:32 1 1500
DISK
NAME VOLUME TOUT DEVICE SERVER MPGROUP
iso0 iso0@primary-vds0 disk@1 primary
vdisk_test1 vdisk_test1@primary-vds0 disk@0 primary
VCONS
NAME SERVICE PORT
test1 primary-vcc0@primary 5001
------------------------------------------------------------------------------
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
test2 active -t---- 5000 8 1G 12% 7m
MAC
00:14:4f:f9:5f:8d
HOSTID
0x84f95f8d
CONTROL
failure-policy=ignore
DEPENDENCY
master=
VCPU
VID PID UTIL STRAND
0 4 100% 100%
1 5 0.0% 100%
2 6 0.0% 100%
3 7 0.0% 100%
4 8 0.0% 100%
5 9 0.0% 100%
6 10 0.0% 100%
7 11 0.0% 100%
MEMORY
RA PA SIZE
0x8000000 0x48000000 1G
VARIABLES
auto-boot?=false
NETWORK
NAME SERVICE DEVICE MAC MODE PVID VID MTU
vnet2 primary-vsw0@primary network@0 00:14:4f:f9:a2:32 1 1500
PEER MAC MODE PVID VID MTU
primary-vsw0@primary 00:14:4f:f8:c1:23 1 1500
vnet1@test1 00:14:4f:f9:83:63 1 1500
DISK
NAME VOLUME TOUT DEVICE SERVER MPGROUP
vdisk_test2 vdisk_test2@primary-vds0 disk@0 primary
iso1 iso1@primary-vds0 disk@1 primary
lofi_sol9 lofi_sol9@primary-vds0 disk@2 primary
VCONS
NAME SERVICE PORT
test2 primary-vcc0@primary 5000
root@todd:/export/home/rhernandez#
iīm desesperate ... can anybody help me?
Last edited by Corona688; 09-09-2015 at 12:17 PM..
Not what you want to hear unfortunately but Solaris 11 does NOT support legacy zones. You need to use Solaris 10 as your Global zone if you want to guest Solaris 9 & 10.
Yes, i finally installed Solaris 10 on guests domains. Now im trying to make a Solaris 9 zone on one of them.
I have a problem, i donīt have network comunication between domains, so i just can connect by console. I need to trasnfer files from global domain to guests domains so... anybody has an idea how to make possible ftp transfers betweetn primary to guests?
thanks!
---------- Post updated 14-09-15 at 10:42 PM ---------- Previous update was 13-09-15 at 11:32 PM ----------
Code:
primary:
NETWORK
NAME SERVICE DEVICE MAC MODE PVID VID MTU
vnet-primary primary-vsw0@primary network@0 00:14:4f:f9:50:52 1 1500
PEER MAC MODE PVID VID MTU
primary-vsw0@primary 00:14:4f:f8:c1:23 1 1500
vnet2@test2 00:14:4f:f9:a2:32 1 1500
vnet1@test1 00:14:4f:f9:83:63 1 1500
dominio1
NETWORK
NAME SERVICE DEVICE MAC MODE PVID VID MTU
vnet1 primary-vsw0@primary network@0 00:14:4f:f9:83:63 1 1500
PEER MAC MODE PVID VID MTU
primary-vsw0@primary 00:14:4f:f8:c1:23 1 1500
vnet2@test2 00:14:4f:f9:a2:32 1 1500
vnet-primary@primary 00:14:4f:f9:50:52 1 1500
dominio2
NETWORK
NAME SERVICE DEVICE MAC MODE PVID VID MTU
vnet2 primary-vsw0@primary network@0 00:14:4f:f9:a2:32 1 1500
PEER MAC MODE PVID VID MTU
primary-vsw0@primary 00:14:4f:f8:c1:23 1 1500
vnet1@test1 00:14:4f:f9:83:63 1 1500
vnet-primary@primary 00:14:4f:f9:50:52 1 1500
Last edited by Don Cragun; 09-14-2015 at 11:03 PM..
Reason: Add CODE tags.
Hi, itīs just a lab for university, iīm trying to show how to migrate a solaris 9 machine into solaris 11 machine.
I made two guest domain, but they canīt ping one each other, and canīt ping to primary too.
I have a vswitch in primary, and two vnet interfaces visible one for each guest domain but, canīt ping...
Any suggestion?
---------- Post updated at 08:11 PM ---------- Previous update was at 04:14 PM ----------
so here's an example from my server
Code:
oot@11:~# zoneadm list -cv
ID NAME STATUS PATH BRAND IP
0 global running / solaris shared
- tstzone1 installed /zones/tstzone1 solaris excl
root@11:~# cd /zones/tstzone1
root@11:/zones/tstzone1# ls
root
root@11:/zones/tstzone1# cd root
root@11:/zones/tstzone1/root# ls
bin etc home mnt proc sbin tmp var
dev export lib opt root system usr
the point being that the zone file system is literally part of the global file system. Meaning you can just copy the files into the zones' filesystem. Does this answer your question?
I'm really stuck here. I've created an LDOM on a SPARC T4-1 with Solaris 11.4 to run a copy of Linux for SPARC. I got the Linux ISO installed and Linux itself installed and booted OK. The only thing is is that there's no networking available in the Linux guest.
This question is basically the... (7 Replies)
hello to everyone. im new member here.
i have a problem with a guest ldom on solaris 11 sparc in a T8. I need to access to disk vds assigned to guest domain but from control domain.
I want to modify a parameter in inittab of the guest domain because start guest domain give me problems... (2 Replies)
I swear I have no other devices on the vmnet 192.168.142.2, but after I configured one of the solaris x86 os, I kept getting warning ..node xx xxxxx have our ip addresss 192.168.142.2, and it scrolled thru it forever ..
I tried to boot it into single user mode , still having the same issue..
... (1 Reply)
Hi all,
I'm using virtualbox bridged adapter
Host:Windows 7
Guest: Solaris 11
while I can ping between the host and guess, I cannot access the Internet from the solaris guest.
here's my settings:
while I can ping 173.194.38.128 (which is actually google.com), I cannot ping... (3 Replies)
Hello,
I have a Solaris 10 x86 VM and I am trying to access the Solaris install menu.
I have the ISO set to connect on startup, and I can see that it is mounted in my system. But when I power on the VM, the GRUB menu comes up and I only have the option of booting Solaris.
Also I have... (4 Replies)
Hi,
I've a CentOS Server and I need to create KVM guest machine without X.
/usr/sbin/virt-install --name server1 --ram 4000 --vcpus=8 --file=/srv/virtual/server1.img --file-size=20 --cdrom /tmp/server1.iso --mac=52:54:00:fd:48:7c
The iso was created with cobbler...
So, now the machine is... (5 Replies)
Hi Everyone,
one question is it possible to migrate a physical standalone Solaris 8 or 9 OS to Guest Domain (LDOMs).
If yes, can someone please provide steps to migrate these OS to LDOMs.
Thanks,
Kartheek. (1 Reply)
hi All,
I require your help and suggestion in this. I have a solaris 10 (guest) installed on a vmware and my host OS is windows 2003 server. i am trying to conenct to the solaris 10 from my local Pc through putty, but unable to connect. please advice what setup or prerequitsites are required to... (4 Replies)