Login or Register to Ask a Question and Join Our Community


Solaris

T2000 Sparc server fails boot

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris T2000 Sparc server fails boot
# 8  
Old 01-05-2015
likely yes... the battery failed, the time reverted to 1999, and I'm still getting:
Code:
SC Alert: BATTERY at SC/BAT/V_BAT has exceeded low warning threshold.

I'm sure I lost everything, including LDM, if it's held by the battery.

I'm waiting on a battery - I should have one in hand today. In the meantime, any idea what other settings may be lost?

BTW, it will boot to failsafe mode, just not single user.
Last edited by val riverwalk; 01-05-2015 at 03:47 PM..
# 9  
Old 01-05-2015
If you don't have a valid contract you might not be able to get a newer firmware...
# 10  
Old 01-05-2015
Update with various changes re: Boot failure
SmilieUpdate:
-was able to update firmware, including hypervisor - no change. Still fails

Code:
SunOS Release 5.10 Version Generic_141414-02 64-bit
Copyright 1983-2009 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
panic: failed to stop cpu1
panic[cpu0]/thread=180e000: send_one_mondo: unexpected hypervisor error 0x2 while sending a mondo to cpuid: 0x1
000000000180b460 unix:send_one_mondo+14c (1, 10aeb58, 0, 2, 180c5e8, 1)
  %l0-3: 000000000187c000 0000000001866e18 0000000000000000 000000221aa114c0
  %l4-7: 000000000187c2c0 000000000187f980 0000000000000003 00000021d31a88c0
000000000180b510 unix:xt_one_unchecked+c8 (1, 100ff74, 70020000, 0, 0, 1)

it CAN boot
-from CDrom, with or without single user
-via failsafe, and can mount the ZFS bootvolume

It cannot boot:
-to single user for the local drive
-regularly for the local drive
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

M5000 fails to boot

I have an m5000 that Is down. I have access to XSCF> and was able to get to the ok prompt. However, on >ok boot it failed to boot. erred with : svc.startd: svc:/system/device/fc-fabric:default: Method "/lib/svc/method/fc-fabric" failed due to signal KILL. Nov 29... (3 Replies)
Discussion started by: goya
3 Replies

2. Shell Programming and Scripting

Grep command Fails on SunOS Sparc

Hi, This command works ggrep -v -F -x -f app1.txt app2.txt But, I don't have ggrep on SunOS Sparc so I tried using grep instead but it errors out grep: illegal option -- F bash-2.03$ uname -a SunOS mymac 5.8 Generic_Virtual sun4v sparc sun4v Can you help me with a grep command that... (6 Replies)
Discussion started by: mohtashims
6 Replies

3. Hardware

Hardware RAID on Sun T2000 Server

Hi All I have a Sun T2000 server. Couple of years ago I had configured and mirrored the boot drive with an other drive using hardware RAID 1 using raidctl command. Following is the hardware RAID output. root@oracledatabaseserver / $ raidctl RAID Volume RAID RAID Disk... (0 Replies)
Discussion started by: Tirmazi
0 Replies

4. Solaris

T2000 Server cannot power on

Hi All, I recently had issues with my new T2000 server. I purchased a new mainboard and swapped the CPU and DIMMs to the new board. Now when i power on the server im unable to do so. I get the following error: ‘SC Alert: Host system poweron failed due to fault at MB/FF_POK.' When i do... (2 Replies)
Discussion started by: Caully
2 Replies

5. Solaris

Auto boot problem on Sun T2000

Hi All I have a problem on T2000 server. bash-3.00# uname -a SunOS 5.10 aaa Generic_120011-14 sun4v sparc SUNW,Netra-T2000After the initial solaris installation server failed to boot: Rebooting with command: boot Boot device: disk:b File and args: The file just loaded does not appear... (1 Reply)
Discussion started by: ouzist
1 Replies

6. Solaris

Solaris 10 install fails on sparc

I'm trying to do an upgrade/install from Solaris 8 to Solaris 10 on a SUN Sparc system. I halt the system, as documented, but when I attempt to boot off the distribution DVD; i.e. halt : : OK> boot cdrom The system indicates that the device is 'unrecognizable' These are SUN... (5 Replies)
Discussion started by: imagtek
5 Replies

7. Solaris

Accessing a StorageTek 2530 Disk array from SUN, SPARC Enterprise T2000

Hello, Wondering if anyone can help me with mounting a file share from my Sun T2000 server running Solaris 10 to my connected 2530 disk array? I believe I've connected the disk array correctly and I have created a volume on the array using the filesystem (Sun_SAM-FS, RAID-5). The T2000... (15 Replies)
Discussion started by: DundeeDancer
15 Replies

8. Solaris

Sun Server T2000 occasionally reboot

Hi, i am really 'fresh' to Solaris or any UNIX OS. My role as web developer but i need slightly involve to Solaris support. It is harder for me to understand it and i recently encounter a problems. /var file system (/dev/md/rdsk/d425) is being checked. run fsck -F ufs /dev/md/rdsk/d425 ... (8 Replies)
Discussion started by: webster5u
8 Replies

9. Solaris

Error while trying to boot from cdrom on Sun Fire T2000

Hi Guyz, I recently downloaded sol-10-u6-ga1-sparc-dvd.iso from Sun. I burned the disk as cd .iso. When trying to boot at the ok> boot cdrom i get the following error: ----------------------------------------------------------------------- Boot device:... (2 Replies)
Discussion started by: Mwamba
2 Replies

10. Solaris

Sun Sparc T2000 + StorageTek 2540 - Help, I'm lost

I have a Sun Sparc T2000 (Solaris 10 05-08) and have installed a PCI-X 4GB Single Port HBA card in it. I have one StorageTek 2540 array that I would like to connect to the T2000. For the moment it would be a single path connection, but I've ordered a 2nd HBA, so eventually it would be... (4 Replies)
Discussion started by: soliberus
4 Replies
Login or Register to Ask a Question