likely yes... the battery failed, the time reverted to 1999, and I'm still getting:
I'm sure I lost everything, including LDM, if it's held by the battery.
I'm waiting on a battery - I should have one in hand today. In the meantime, any idea what other settings may be lost?
BTW, it will boot to failsafe mode, just not single user.
Last edited by val riverwalk; 01-05-2015 at 03:47 PM..
I have an m5000 that Is down.
I have access to XSCF>
and was able to get to the ok prompt.
However, on
>ok boot
it failed to boot.
erred with :
svc.startd: svc:/system/device/fc-fabric:default: Method "/lib/svc/method/fc-fabric" failed due to signal KILL.
Nov 29... (3 Replies)
Hi,
This command works
ggrep -v -F -x -f app1.txt app2.txt But, I don't have ggrep on SunOS Sparc so I tried using grep instead but it errors out
grep: illegal option -- F bash-2.03$ uname -a
SunOS mymac 5.8 Generic_Virtual sun4v sparc sun4v Can you help me with a grep command that... (6 Replies)
Hi All
I have a Sun T2000 server. Couple of years ago I had configured and mirrored the boot drive with an other drive using hardware RAID 1 using raidctl command.
Following is the hardware RAID output.
root@oracledatabaseserver / $ raidctl
RAID Volume RAID RAID Disk... (0 Replies)
Hi All,
I recently had issues with my new T2000 server. I purchased a new mainboard and swapped the CPU and DIMMs to the new board. Now when i power on the server im unable to do so. I get the following error:
‘SC Alert: Host system poweron failed due to fault at MB/FF_POK.'
When i do... (2 Replies)
Hi All
I have a problem on T2000 server.
bash-3.00# uname -a
SunOS 5.10 aaa Generic_120011-14 sun4v sparc SUNW,Netra-T2000After the initial solaris installation server failed to boot:
Rebooting with command: boot
Boot device: disk:b File and args:
The file just loaded does not appear... (1 Reply)
I'm trying to do an upgrade/install from Solaris 8 to Solaris 10 on a SUN Sparc system.
I halt the system, as documented, but when I attempt to boot off the distribution DVD; i.e.
halt
:
:
OK> boot cdrom
The system indicates that the device is 'unrecognizable'
These are SUN... (5 Replies)
Hello,
Wondering if anyone can help me with mounting a file share from my Sun T2000 server running Solaris 10 to my connected 2530 disk array?
I believe I've connected the disk array correctly and I have created a volume on the array using the filesystem (Sun_SAM-FS, RAID-5).
The T2000... (15 Replies)
Hi, i am really 'fresh' to Solaris or any UNIX OS. My role as web developer but i need slightly involve to Solaris support. It is harder for me to understand it and i recently encounter a problems.
/var file system (/dev/md/rdsk/d425) is being checked.
run fsck -F ufs /dev/md/rdsk/d425
... (8 Replies)
Hi Guyz,
I recently downloaded sol-10-u6-ga1-sparc-dvd.iso from Sun. I burned the disk as cd .iso.
When trying to boot at the ok> boot cdrom
i get the following error:
-----------------------------------------------------------------------
Boot device:... (2 Replies)
I have a Sun Sparc T2000 (Solaris 10 05-08) and have installed a PCI-X 4GB Single Port HBA card in it.
I have one StorageTek 2540 array that I would like to connect to the T2000.
For the moment it would be a single path connection, but I've ordered a 2nd HBA, so eventually it would be... (4 Replies)