Update:
-was able to update firmware, including hypervisor - no change. Still fails
Code:
SunOS Release 5.10 Version Generic_141414-02 64-bit
Copyright 1983-2009 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
panic: failed to stop cpu1
panic[cpu0]/thread=180e000: send_one_mondo: unexpected hypervisor error 0x2 while sending a mondo to cpuid: 0x1
000000000180b460 unix:send_one_mondo+14c (1, 10aeb58, 0, 2, 180c5e8, 1)
%l0-3: 000000000187c000 0000000001866e18 0000000000000000 000000221aa114c0
%l4-7: 000000000187c2c0 000000000187f980 0000000000000003 00000021d31a88c0
000000000180b510 unix:xt_one_unchecked+c8 (1, 100ff74, 70020000, 0, 0, 1)
it CAN boot
-from CDrom, with or without single user
-via failsafe, and can mount the ZFS bootvolume
It cannot boot:
-to single user for the local drive
-regularly for the local drive
I have an m5000 that Is down.
I have access to XSCF>
and was able to get to the ok prompt.
However, on
>ok boot
it failed to boot.
erred with :
svc.startd: svc:/system/device/fc-fabric:default: Method "/lib/svc/method/fc-fabric" failed due to signal KILL.
Nov 29... (3 Replies)
Hi,
This command works
ggrep -v -F -x -f app1.txt app2.txt But, I don't have ggrep on SunOS Sparc so I tried using grep instead but it errors out
grep: illegal option -- F bash-2.03$ uname -a
SunOS mymac 5.8 Generic_Virtual sun4v sparc sun4v Can you help me with a grep command that... (6 Replies)
Hi All
I have a Sun T2000 server. Couple of years ago I had configured and mirrored the boot drive with an other drive using hardware RAID 1 using raidctl command.
Following is the hardware RAID output.
root@oracledatabaseserver / $ raidctl
RAID Volume RAID RAID Disk... (0 Replies)
Hi All,
I recently had issues with my new T2000 server. I purchased a new mainboard and swapped the CPU and DIMMs to the new board. Now when i power on the server im unable to do so. I get the following error:
‘SC Alert: Host system poweron failed due to fault at MB/FF_POK.'
When i do... (2 Replies)
Hi All
I have a problem on T2000 server.
bash-3.00# uname -a
SunOS 5.10 aaa Generic_120011-14 sun4v sparc SUNW,Netra-T2000After the initial solaris installation server failed to boot:
Rebooting with command: boot
Boot device: disk:b File and args:
The file just loaded does not appear... (1 Reply)
I'm trying to do an upgrade/install from Solaris 8 to Solaris 10 on a SUN Sparc system.
I halt the system, as documented, but when I attempt to boot off the distribution DVD; i.e.
halt
:
:
OK> boot cdrom
The system indicates that the device is 'unrecognizable'
These are SUN... (5 Replies)
Hello,
Wondering if anyone can help me with mounting a file share from my Sun T2000 server running Solaris 10 to my connected 2530 disk array?
I believe I've connected the disk array correctly and I have created a volume on the array using the filesystem (Sun_SAM-FS, RAID-5).
The T2000... (15 Replies)
Hi, i am really 'fresh' to Solaris or any UNIX OS. My role as web developer but i need slightly involve to Solaris support. It is harder for me to understand it and i recently encounter a problems.
/var file system (/dev/md/rdsk/d425) is being checked.
run fsck -F ufs /dev/md/rdsk/d425
... (8 Replies)
Hi Guyz,
I recently downloaded sol-10-u6-ga1-sparc-dvd.iso from Sun. I burned the disk as cd .iso.
When trying to boot at the ok> boot cdrom
i get the following error:
-----------------------------------------------------------------------
Boot device:... (2 Replies)
I have a Sun Sparc T2000 (Solaris 10 05-08) and have installed a PCI-X 4GB Single Port HBA card in it.
I have one StorageTek 2540 array that I would like to connect to the T2000.
For the moment it would be a single path connection, but I've ordered a 2nd HBA, so eventually it would be... (4 Replies)