10 More Discussions You Might Find Interesting
1. Solaris
Hi all, I have the following LUN which is showing OK with its two paths:
DEVICE PROPERTIES for disk: /dev/rdsk/c23t500507630A3BC579d123s2
Vendor: IBM
Product ID: 2107900
Revision: 3010
Serial Num: 75WB0114900
Unformatted capacity:... (13 Replies)
Discussion started by: ludiegu
13 Replies
2. Solaris
Hello,
I have Solaris 10 running on one of rack server with dual port FC card. Each port of FC card is connected to two switches respectively. I have been trying to test multipathing functionality with one of FC Storage.
While I have two storage controllers , each connected to the two switches... (0 Replies)
Discussion started by: linuxfreaker
0 Replies
3. Shell Programming and Scripting
Hi All,
I am using the below script which has awk command, but it is not returing the expected result. can some pls help me to correct the command.
The below script sample.ksh should give the result if the value of last 4 digits in the variable NM matches with the variable value DAT. The... (7 Replies)
Discussion started by: G.K.K
7 Replies
4. Shell Programming and Scripting
Hello everyone, I'm in need of some assistance. I'm currently enrolled in an introductory UNIX shell programming course and, well halfway through the semester, we are receiving our first actual assignment. I've somewhat realized now that I've fallen behind, and I'm working to get caught up, but for... (1 Reply)
Discussion started by: MrMagoo22
1 Replies
5. Solaris
Hi, I have a question regarding HBA configuration. Here are the commands' output:
# cfgadm -al | grep fc
c1 fc-fabric connected unconfigured unknown
c2 fc connected unconfigured unknown
c5 ... (11 Replies)
Discussion started by: aixlover
11 Replies
6. Solaris
hi i have a sun machine which has one hba 2ports;
out of which one port says it is not connected
# luxadm -e port
/devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
/devices/pci@1d,700000/SUNW,qlc@1,1/fp@0,0:devctl NOT CONNECTED
but both... (9 Replies)
Discussion started by: anwesh
9 Replies
7. Solaris
Hi Gurus out there...
I am pondering over a situation where I have non-root access (user account), where I am trying to determine paths (including multipaths) on a host.
"luxadm display" seems very appropriate, but requires root access.
Is there anyway I can get the FC path information?
... (1 Reply)
Discussion started by: verisund
1 Replies
8. Solaris
I have a new SAN (Fujitsu Eternus 2000) and am trying to setup a veritas cluster on it, however veritas does not see all of the vluns I have exposed to the box. The OS does see them though. I have seen a lot of post about this, but it seems they are about people having just the opposite problem... (0 Replies)
Discussion started by: timothy.edwards
0 Replies
9. Solaris
Hi All,
I'm actually trying to configure a Qlogic HBA on a solaris9 connecting in a Brocade SAN. I installed Solaris9 and now trying to look at FC devices..
bash-2.05# luxadm -e port
Found path to 0 HBA ports
bash-2.05# luxadm probe
No Network Array enclosures found in /dev/es... (7 Replies)
Discussion started by: ilan
7 Replies
10. Shell Programming and Scripting
Hi,
I have a shell scripting. This will take 7 digit number in each line and add 7 digit number with next subsequent lines ( normal addition ).
Eg:
0000001
0000220
0001235
0000022
0000023
...........
.........
........
Like this i am having around 1500000 records. After adding... (23 Replies)
Discussion started by: thambi
23 Replies