9 More Discussions You Might Find Interesting
1. Solaris
It seems like I lost one path on my Solaris-11 box. But I want to make sure before going to Storage team, if issue is from OS side or Storage side. Storage team is able to see that only one wwwn is looged in their switch. I am not at server's physical location. What does below output says ? I... (0 Replies)
Discussion started by: solaris_1977
0 Replies
2. Solaris
Hi
I am new to live upgrade.
I would like to tell you about my new setup, where my boot disk(c0d0) is mirrored with secondary disk(c0d1). I have remove the secondary whole disk(C0d1) from the mirror, so that I can do live upgrade on this secondary disk.
I have done live upgrade on s0 partition... (3 Replies)
Discussion started by: amity
3 Replies
3. Linux
Hello guys, I'm going crazy over here with a problem with a LUN created on a EMC CX3.
I did sucessfully managed to create the LUN on the Storage (the LUN is named DBLNX25EC_TST), after doing the following process:
echo "1" > /sys/class/fc_host/host<n>/issue_lip
and
echo "- - -" >... (10 Replies)
Discussion started by: Zarnick
10 Replies
4. Emergency UNIX and Linux Support
Dear All,
I was having powerpath 5.2 on SUN server with SVM connected to CLARIION box.Please find the following output :
root # powermt display dev=all
Pseudo name=emcpower3a
CLARiiON ID=CK200073400372
Logical device ID=60060160685D1E004DD97FB647BFDC11
state=alive; policy=CLAROpt;... (1 Reply)
Discussion started by: Reboot
1 Replies
5. Solaris
Here is the issue:
I am building a database server using Solaris 10x86 U8.
The system is jumpstarted with mpxio enabled and booting from the san.
We need to have powerpath 5.3 installed and would like to have powerpath take control of the the boot san as well or have mpxio control the san... (2 Replies)
Discussion started by: nabru72
2 Replies
6. Solaris
Hello,
I have an issue with veritas volume manager version 5.0 in combination with EMC powerpath version 5.2.0 running on Solaris10(Sparc). This server is fiber connected to a EMC Clariion CX3-40 SAN.
This is the situation :
Server is a SUN Enterprise M5000
OS = Solaris10 Sparc
Veritas... (1 Reply)
Discussion started by: chipke2005
1 Replies
7. Red Hat
Hi ,
I have a redhat 5.3 server which has 2 vg.. one is rootvg in local harddisk and another one is applicationvg in SAN.. When I reboot the server , EMC powerpath driver is not starting up automatically. Hence applicationvg is not mounting properly. Therefore I need to unmount it manually and... (4 Replies)
Discussion started by: Makri
4 Replies
8. AIX
Hi Guys,
I have a problem while trying to upgrade to more current EMC powerpath software on AIX 5.3 - respectively uninstalling the existing one.
I tried to deinstall the powerpath software with removed disks - was working perfectly fine on 12 servers - but number 13 is failing with errors:
... (4 Replies)
Discussion started by: zxmaus
4 Replies
9. Solaris
How to change the following values in power path from SP B to SP A ?
Owner: default=SP B, current=SP B
this is excerpt from powermt display dev=all (3 Replies)
Discussion started by: fugitive
3 Replies
mdlogd(1M) System Administration Commands mdlogd(1M)
NAME
mdlogd - Solaris Volume Manager daemon
SYNOPSIS
mdlogd
DESCRIPTION
mdlogd implements a simple daemon that watches the system console looking for messages written by the Solaris Volume Manger. When a Solaris
Volume Manager message is detected, mdlogd sends a generic SNMP trap.
To enable traps, you must configure mdlogd into the SNMP framework. See .
USAGE
mdlogd implements the following SNMP MIB:
SOLARIS-VOLUME-MGR-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises FROM RFC1155-SMI
DisplayString FROM SNMPv2-TC;
-- Sun Private MIB for Solaris Volume Manager
sun OBJECT IDENTIFIER ::= { enterprises 42 }
sunSVM OBJECT IDENTIFIER ::= { sun 104 }
-- this is actually just the string from /dev/log that
-- matches the md: regular expressions.
-- This is an interim SNMP trap generator to provide
-- information until a more complete version is available.
-- this definition is a formalization of the old
-- Solaris DiskSuite mdlogd trap mib.
svmOldTrapString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the matched string that
was obtained from /dev/log."
::= { sunSVM 1 }
-- SVM Compatibility ( error trap )
svmNotice TrapTRAP-TYPE
ENTERPRISE sunSVM
VARIABLES { svmOldTrapString }
DESCRIPTION
"SVM error log trap for NOTICE.
This matches 'NOTICE: md:'"
::= 1
svmWarningTrap TRAP-TYPE
ENTERPRISE sunSVM
VARIABLES { svmOldTrapString }
DESCRIPTION
"SVM error log trap for WARNING..
This matches 'WARNING: md:'"
::= 2
svmPanicTrap TRAP-TYPE
ENTERPRISE sunSVM
VARIABLES { svmOldTrapString }
DESCRIPTION
"SVM error log traps for PANIC..
This matches 'PANIC: md:'"
::= 3
END
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWlvma, SUNWlvmr |
+-----------------------------+-----------------------------+
|Interface Stability |Obsolete |
+-----------------------------+-----------------------------+
SEE ALSO
snmpdx(1M), attributes(5)
SunOS 5.11 3 Jun 2004 mdlogd(1M)