Login or Register to Ask a Question and Join Our Community


Solaris

Server disk issue need help

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris Server disk issue need help
# 8  
Old 04-11-2013
thats what Ive been hoping I could do! thanks!

How do I send the break cmd from a remote console? is it (CTRL something??) CTRL-

the only way I can access the server right now is via a terminal console

---------- Post updated at 01:12 PM ---------- Previous update was at 01:12 PM ----------

you guys rock...
# 9  
Old 04-11-2013
You are connected to the RSC (Remote Control Board).
There are commands like

help
poweron
poweroff
reset
break
console

Obviously the "console" command was run, that connects to the system console (Ok> prompt etc.). At the very beginning it says how to escape from the connection.
Try #. (two key strokes within 1 second).
This User Gave Thanks to MadeInGermany For This Post:
RyanV
# 10  
Old 04-11-2013
I get no response when I try shift# .

Thanks!
Ryan

---------- Post updated at 01:35 PM ---------- Previous update was at 01:35 PM ----------

Dallas Terminal Server Hosts UNIX 2
------------------oOO-----
|__| |__|
| | | |
mgmt-unix2 line 15
C
*****************************************************************
* --- --- *
* LOCAL MODE *
*****************************************************************
# 11  
Old 04-11-2013
just enter "break" from the rsc (#.) prompt and go back to console after that. if that worked you should be at the "ok" prompt. set auto-boot to "false" for further troubleshooting.

ok auto-boot? false
# 12  
Old 04-11-2013
A # and a . within one second!
Maybe hit the Enter key before.
The default RSC prompt is sc>
and there is "help" command
Then give "break" command and go back to console with "console" command.
# 13  
Old 04-11-2013
Well whatever it's stuck for right now, I can't break out with shift# . enter
# 14  
Old 04-11-2013
not shift#. just #.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Solaris 11 disk issue

I have 2 disks in my system.I recently added a zpool to the disk, but today I changed my mind and deleted the zpool , zpool destroy -f extra The zpool is now deleted and I want to partition the disk, so I delete the only partition on the disk. Now when I run format again, format... (13 Replies)
Discussion started by: cbtshare
13 Replies

2. Solaris

T5220 disk mapping issue

Hi, More a Sun T5220 problem then a Solaris 10 problem, but perhaps someone had a similar issue. For starters the output with 1 disk in slot 0 of the server. It points to PhyNum 5, where I would expect PhyNum 0. {0} ok probe-scsi MPT Version 1.05, Firmware Version 1.22.00.00 Target... (2 Replies)
Discussion started by: ejdv
2 Replies

3. UNIX Desktop Questions & Answers

Issue with disk space usage

Issue with disk space usage I have the following line in my "df -h" output: Filesystem Size Used Avail Capacity Mounted on /dev/ad4s1a 496M 495M -39M 109% / What is the issue with having 9% excess utilisation? How can I find out what this partition is... (2 Replies)
Discussion started by: figaro
2 Replies

4. Filesystems, Disks and Memory

Issue available disk space while using xdd

Good morning, I seem to be running into an issue with some drives I have attached to my solaris server. The drives are attached correctly, the partitions are arranged with fdisk, the ext3 filesystem is setup using mkfs, and finally the drive is mounted. When I use xdd to perform read/write... (3 Replies)
Discussion started by: mrpogo07
3 Replies

5. AIX

Disk I/O Issue using LVM

We have a filesystem which contains 8 hard disks but i am facing disk I/O issue becuase data is not spreading across all the disks.Is there any way i can check how data is spreading and any parameter we need to change to spread ata across all disks. OS--AIX 5.3 (1 Reply)
Discussion started by: ukatru
1 Replies

6. AIX

Disk I/O Issue

We have a filesystem which contains 8 hard disks but i am facing disk I/O issue becuase data is not spreading across all the disks.Is there any way i can check how data is spreading and any parameter we need to change to spread ata across all disks. OS--AIX 5.3 (3 Replies)
Discussion started by: ukatru
3 Replies

7. Solaris

Disk Suite issue

Solaris 9 We had a problem server where only root was not mirrored (before my time). When I tried to mirror it, the live root slice bailed with errors at 97% so it couldn't be mirrored. It's a matched pair of boxes (nfs1 and nfs2) and they are interchangeable with regards to the NFS... (0 Replies)
Discussion started by: BOFH
0 Replies

8. UNIX for Advanced & Expert Users

partition disk issue

hi guys, I've got a strange issue, may be one of you has experienced this. SunOS 5.10 Generic_118833-33 sun4u sparc SUNW,Sun-Fire-V440 everything is mirrored. My issue is that I have a umpty directory but seems to have data on. Let me show you # df -h /data Filesystem size used... (10 Replies)
Discussion started by: moustik
10 Replies

9. AIX

disk issue

Hi, I have a AIX 4.3 box here with problems cause of a disk in below VG. volume group: workvg lspv hdisk4 000166789869ab2d workvg hdisk5 000166789869b96b workvg now hdisk4 disk has failed and cause the quorum was set, workvg became varied off. I have to replace the... (2 Replies)
Discussion started by: karthikosu
2 Replies

10. UNIX for Advanced & Expert Users

Solaris 8 disk/mirroring issue

Hello! I recently inherited system administration duties for a SUN v880 box. The system has 6 physical hard disks.. In doing some basic maintenance, I found they're configured for mirroring. I ran the metastat and metadb commands, and many of the mirrors are showing they are in need of... (5 Replies)
Discussion started by: ghuber
5 Replies
Login or Register to Ask a Question