Sun T1000 performance

6 More Discussions You Might Find Interesting

1. Solaris

T1000 Sun Solaris server root login blocked

Hi, Can someone tell me how to re-activate the root login of T1000 sun solaris server. Thx

2. Solaris

sun v240 performance

Hi, we are having one sun v240 server, now this server is performing very slow, checked using top, iostat and vmstat commands, output is looking normal, but the performance is very slow and generating more traffic in network, how can we resolve this. Regards RJS

3. Filesystems, Disks and Memory

Poor read performance on sun storedge a1000

Hello, i have a a1000 connected to an e6500. There's a raid 10 (12 disks) on the a1000. If i do a dd if=/dev/zero of=/mnt/1 bs=1024k count=1000 and then look at iostat it tells me there's a kw/s of 25000. But if i do a dd of=/dev/zero if=/mnt/1 bs=1024k count=1000 then i see only a...

4. Solaris

Sun T1000 application low performance

Hello All. I have Sun T1000 server with Solaris 10. On T1000 installed EMC smarts, application for monitoring network devices via SNMP + SNMP. So, Smarts has own DB (contains object - devices and relationships), file takes 30 mb, now, all queries to DB works very slow, so Smarts works too slow,...

5. Solaris

Enhance Sun Solaris 10 performance ?

Guys where can i find values to add in /etc/system to make sun solaris 10 working better ? im sure there is alot of values but i dont know from where i can find them if you know any please send direct and if you know another sites send links to it, thanks so much.

6. AIX

Network performance problem between AIX and SUN ethernet gigabit

I am posting this as an FYI. I burned a lot of time on digging for this solution. The problem was performance between newer AIX p series boxes and a sun 4500 with a fiber nic. I tried many misc. solutions but this turned out to fix the issue. My bandwidth benchmark went from around 20MB/sec to...

LEARN ABOUT NETBSD

mfi

MFI(4)							   BSD Kernel Interfaces Manual 						    MFI(4)

NAME

     mfi -- LSI Logic & Dell MegaRAID SAS RAID controller

SYNOPSIS

     mfi* at pci? dev ? function ?

DESCRIPTION

     The mfi driver provides support for the MegaRAID SAS family of RAID controllers, including:

	   -   Dell PERC 5/e, PERC 5/i, PERC 6/e, PERC 6/i
	   -   Intel RAID Controller SRCSAS18E, SRCSAS144E
	   -   LSI Logic MegaRAID SAS 8208ELP, MegaRAID SAS 8208XLP, MegaRAID SAS 8300XLP, MegaRAID SAS 8308ELP, MegaRAID SAS 8344ELP, MegaRAID
	       SAS 8408E, MegaRAID SAS 8480E, MegaRAID SAS 8708ELP, MegaRAID SAS 8888ELP, MegaRAID SAS 8880EM2, MegaRAID SAS 9260-8i
	   -   IBM ServeRAID M1015, ServeRAID M5014

     These controllers support RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 50 and RAID 60 using either SAS or SATA II drives.

     Although the controllers are actual RAID controllers, the driver makes them look just like SCSI controllers.  All RAID configuration is done
     through the controllers' BIOSes.

     mfi supports monitoring of the logical disks in the controller through the bioctl(8) and envstat(8) commands.

EVENTS

     The mfi driver is able to send events to powerd(8) if a logical drive in the controller is not online.  The state-changed event will be sent
     to the /etc/powerd/scripts/sensor_drive script when such condition happens.

SEE ALSO

     intro(4), pci(4), scsi(4), sd(4), bioctl(8), envstat(8), powerd(8)

HISTORY

     The mfi driver first appeared in NetBSD 4.0.

BSD
								  March 22, 2012							       BSD

Solaris